Midwest Tech 2016 Product Catalog

SUSPENSION

Gear Puller Zim Takes dia. up to 6". Equipped with 1 pair of 3" arms. Crossbeam made of malleable iron. Jaws are made of drop-forged steel. For timing gears, pump shaft and magneto gears, generator and starter repairs.

InnerTie RodTool Lisle Inner tie rod end sockets with a com- plete hex on the full length of the socket. The rounded socket ends prevent access to the wrench flats. Tool utilizes 6 crows feet (1-7/16", 1-3/16", 1-1/4", 1-5/16", 1-1/2", 33.6 mm) to engage wrench flats. Long socket slips over tie rod end and connects to the crows foot. Inner tie rod can be removed and installed without removing the rack. Stk. Mfr. Price 503870 45750 $102.00

Stk.

Mfr. 601

Price

$35.00

988407

5-Ton, 2 Jaw Grip-O-Matic Parts Puller OTC Mechanical puller removes and installs parts for fast, effective repairs. Forged from quality steel and heat treated. Reversible jaws. Exceeds rated capacity testing.

Automotive CVTOOLS

Universal InnerTie RodTool Mayhew Used to remove & mount inner tie rods on vehicles. Fits 35-45mm tie rods with no

Stk.

Mfr.

Max. Reach Spread Capacity

Price

$48.60

693291

1024

3-1/4"

6"

additional interchangeable adapters. For use on round, hexagonal & octag- onal tie rods. Extended shaft and narrow profile allows for use in hard-to- reach and confined spaces. Stk. Mfr. Length Price 528600 29910 16-1/2" $156.00

Gear Pullers Proto Toggle

type pullers incorporate

an automatic grip tightening

feature. They provide the means and power to pull gears, flywheels, pulleys and other parts where it is necessary to apply the arms between spokes and where no other puller can be applied. Pullers adjust and reverse using 3 parts: link with locking pin; link with 2 grooved pins and the jaw. Pullers have fewer parts, including pins which are pressed into the link. Forcing screws are forged from alloy steel and heat-treated. 2 Jaw Puller Stk. Mfr. Spread Reach Capacity Price 913970 4033 4" 3-1/2" 2 Ton $54.90 3 Jaw Puller 913974 4038 11" 9" 7 Ton $176.00 3 Jaw Reversible Puller 913989 4046 7" 5-1/2" 5 Ton $107.00 913990 4047 10" 5-1/2" 7 Ton $170.00

Suspension StrutTool Lisle Heavy duty clamps and bolts safely and securely hold spring during operation. Fits all strut spring sizes, import and domestic.

Stk.

Mfr.

Price

$79.20

503902

62300

4-WD & FWDTOOLS

4-WD Bearing LocknutTools Lisle 1/2" drive. Not for use with impact wrenches.

Pitman ArmWedge OEM Easily removes Pitman arms. Insert wedge between the parts to be separated and hammer the end, breaking the parts free. Forged and heat- treated.

For 4- & 6-Slot Applications Ford (3/4 ton) 1978 to present GM (3/4 & 1 ton) 1973-1981. Stk. Mfr. Price 503849 27400 $32.10 For 4-Slot Applications Chevrolet, GMC (1/2 ton) 1960 to present, Blazer, Scout, Bronco 1966 to present, Ford F-100 & F-250 1959 to present, Dodge, International (1/2 ton) 1969 to present. Stk. Mfr. Price 503847 27250 $23.60 CVTOOLS CV Joint BandingTool

Stk.

Mfr.

Opening

Price

$16.20

281190

27021

1-1/8"

Ball Joint Separator OEM Separates stubborn ball joints from the steering knuckle. Insert tool between parts to be separated and hammer the end to break parts free. Makes replacement and disassembly of front suspensions and steering components easy. Forged, heat-treated wedged ends.

Lisle For all CV joints using Band-It® and Band-It Jr.® type boot bands. Use 5/8" socket or wrench to wind and crimp new band on

Stk.

Mfr.

Opening

Price

$12.30

281188

25202

15/16"

boot. Tool is easily disengaged from the band after tightening. Stk. Mfr.

Tie Rod End Puller OEM Separates tie rod ends from the steering knuckles, idler arms and Pitman arms. Prevents damage to steering compo- nents. Heavy-duty alloy steel. Tapered fork wedge ends. 11-7/8"L. Stk. Mfr. Opening Price 281185 25201 21/32" $14.90

Price

$12.60

503735

30950

493

Phone 800.831.5904 | Fax 800.285.7054 | www.midwesttechnology.com