Midwest Tech 2016 Product Catalog

Seal Puller Lisle For oil and grease seals. Insert the tip of the tool behind the seal, press and pull. 2 tip

Power Steering &Alternator Pulley Puller OEM Safely removes pressed-on 1 or 2-groove pulleys from alternators and power

sizes reach in and fit nearly all seal applications. Stk. Mfr.

steering pumps. Fits most large and small pulleys in domestic and imported cars. Features rigid drop-forged jaws, solid block body and a fine thread screw for easy pulling. Stk. Mfr. Price 281180 25190 $29.20 Reversible Jaw Slide Hammer Puller Proto Versatile tool for pulling jobs involving gears, bearings, outer races, grease retainers, oil seals, etc. Use 2 or 3 puller

Length 12-1/2"

Price

$11.60

503891

56750

PULLERS Automotive Stk. 503871

SteeringWheel Puller Lisle Universal steering wheel puller for most makes and models. Screw pad protects end of steering shaft. Heavy-duty for long wear.

jaws for inside jobs such as bearing cups and outer races. • 5 lb. slide hammer - removable for independent use • 2 jaw capacity - inside 1-1/4" to 3-1/2", outside 1" to 4-1/2" • 3 jaw capacity - 1-1/2" to 4-1/4", outside 1-1/2" to 4-1/2" Stk. Mfr. Length

Mfr.

Price

$23.10

45000

Harmonic Balancer Puller Lisle Tool helps stop damage to pulley and shaft. Eases the operation of pulling the balancer pulley. Includes body, puller screw, tip assembly, 3 washers, two 3/8"-16 x 3" bolts, three 5/16"-18 x 3" bolts & three 3/8"-24 x 3" bolts. Stk. Mfr. Price 503873 45500 $32.10

Price

$166.00

924030

5049

27"

Silver Slapper 8-Way Slide Hammer Puller Set OTC For pulling flange-type rear axles, stub- born oil seals and bearings, and other press-fit parts. Jaws can be set up for 2- or 3-way inter- nal or external pulling jobs.

Harmonic Balancer Puller Set Lisle Updated jaw design on damper puller provides greater strength. Clevis pins allow jaws to be quickly removed and replaced. Removes most automotive harmonic balancers.

Includes 5 lb. slide hammer puller, rear axle pulling attachment, 3-way cross-head, dent puller attachment, 2-way cross-block, puller hook at- tachment, 3 pulling jaws for internal or external pulling jobs, cone & grip wrench adapter w/single lead (wrench sold separately) . Stk. Mfr. Price 693293 1179 $163.00

Includes standard harmonic balancer puller, pulling screws & adapters (for 3300 & 3800 GM V6 engines) & updated harmonic damper pulley puller (for Chrysler, GM, Mitsubishi & Dodge) , case. Stk. Mfr. Price 503811 51700 $159.00 Bearing Puller OEM For removing flywheel pilot bearings with a slide hammer similarly threaded 5/8" x 18 or 3/4" x 16. Also useful to pull bearings and bushings on motors, gen- erators and starters. 5-7/8" long. Stk. Mfr. Capacity Price 281200 27059 11/16" - 1-1/4" $21.10

Multipurpose Puller Set OTC Assortment of puller tools provides a wide range of job versatility.

• 5 lb. slide hammer puller w/2- & 3-way re- versible heads (2 or 3 jaws for inside & outside pulling jobs) • Front hub puller for servicing front-wheel-drive cars (has spare locknut for use w/No. 1177 slide hammer for rear axle flanges) • 2-ton combination, 2- or 3-jawGrip-O-Matic® puller (3-3/8" reach, 4-3/4" spread) • 5-ton combination 2- or 3-jaw Grip-O-Matic® puller (5-1/2" reach, 7" spread) • Bar-type gear & pulley puller with 5-1/2"L screw & 2 hex head cap screws (3/8"-16" x 3"L, 1-1/2" to 4-1/4" spread) • Bearing pulling attachment (use w/No. 1027 & 7393 pullers for 1/8" to 2" spread) Includes 5 lb. hammer puller, hub puller, 2 sizes of OTC Grip-O-Matic jaw-type pullers, a bearing pulling attachment, cross-bar gear, pulley puller & molded case. Stk. Mfr. Price 693295 1181 $439.00

Bearing Splitter OTC Knife-like edges easily place behind the part to secure a gripping surface, even when clearances are extremely limited. Used with OTC's Grip-O-Matic® puller (puller jaws grip attachment's outer edge) , or with a Push-Puller (puller legs are threaded into the attachment's 2 tapped holes) .

Pitman Arm Pullers For Cars &Trucks Lisle Designed to work on even the most stubborn Pitman arm pulling jobs. Body is drop-forged and heat- treated for strength. 4-1/4" length, 1-5/16" jaw opening.

Stk.

Mfr.

Capacity 1/8" - 2"

Price

$48.60 $89.80

693292 693294

1122 1123

1/2" - 4-5/8"

Stk.

Mfr.

Price

$33.10

503921

41900

492

www.midwesttechnology.com | Phone 800.831.5904 | Fax 800.285.7054