2014 Locke Supply Co.

HOLE SAW BLADES & SELF FEED BITS

SELF FEED BITS

HOLE SAWS

CARBIDE-TIPPED HOLE CUTTER SET

• 2-cutter design for maximum drilling efficiency & hole completion • Aggressive self-feed for faster drilling • Shank flats for better retention Locke# T1392 DW1649 8 pc. self feed bit kit Includes: 1", 1 8 ", 1¼", 1½", 1¾", 2 8 ", 2 b " and 5½" Extension T1320 DW1631 1 8 " Self feed bit T1321 DW1636 2" Self feed bit T1322 DW1639 2 b " Self feed bit T1323 DW1641 3 s " Self feed bit

Designed for cutting all types of hard and soft wood and other nonferrous materials. The Malco VENT SAW is indispensable when fitting fresh air intakes through foundation plates, exterior siding or facing materials encountered in residential or light commercial installations of gas or oil fired furnaces. Locke# T1113 HSW68 4¼" Vent Saw T1114 RBW68 4¼" Blade only T1117 HSW97 6¼" Vent Saw T1118 RBW97 6¼" Blade only T1149 HSX 13" Arbor extension Fits all M ALCO hole saws, vent saw & hole in one saw

Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over drilling. Replaceable cobalt steel pilot drill, with split point tip design, to improve performance and resist walking; eliminates need for “center punch.” 8ga. depth. Locke# T4431 635 7/8", 1-1/8", 1-3/8" cutterheads; pilot drill, hex key and case

AUTOMATIC FEED WOOD BITS

DRILLER'S DUST BOWL FLEXIBLE HOLESAW SHAVINGS RECEPTACLE

QUICK CHANGE HOLE SAW KIT FOR 1/2" THROUGH 2" CONDUIT SIZES

Locke# T0782

LL112 1 8 " diameter LL137 1 a ", 35mm dia. LL200 2", 51mm dia. LL256 2 b ", 65mm LL362 3 s ", 92mm

T0837 T0840 T0841 T0842 T0939

12LS Replacement lead screw for T0840 - T0842

The flexible Driller's Dust Bowl compresses against the work surface and traps all dust and debris as you drill. The bowl fits your drill and hole saw without any adjustments

• Quick Change arbor allows for rapid mounting or removing of hole saws. • Faster, easier slug removal. • Drill pilot hole without saw: Provides better ergnomics- reduces stress on wrist, arm and hand. • Works with recessed light and carbide grit hole saw products as well. • Adapters re-useable to minimize costs. • Universal- works with any brand hole saw. • Kit contains Bi-metal hole saws for ½” through 2” conduit. Push collar to lock on saw, pull to release saw Locke# T4430 830Q Quick Change Hole Saw Kit for 1/2" through 2" conduit sizes

SELF-FEEDING BIT

needed. Locke# T4183

T

48000 Driller's Dust Bowl

| TOOLS

• Fast cutting • Clean bur free holes

• Resharpenable • 7/16" Hex shank Locke# T3022

B U Y R I G H T A N D S A V E !

48-25-2562 Feeding Bit

2-9/16" Self-

Credit: 405-631-9756

1019

www.lockesupply.com