2014 Locke Supply Co.

HOLE SAW BLADES

5¼" BI-METAL HOLE SAWS with 8% Cobalt Tooth Tip

TUNGSTEN CARBIDE TIPPED HOLE CUTTER KIT

CARBIDE GRIT HOLE SAWS

4/6 Variable Pitch Tooth combination, reduces vibration and increases productivity. Deep Gullet design, for improved chip removal. Tough 3/16” Thick Back Plate. Faster cutting. More Holes per Saw. Cuts holes in wood, plastic, or any machinable metal, including nail-embedded wood, plywood, pipe, stainless steel etc. Locke# T1148 5¼" Bi-Metal Hole Saw

Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. Contains 1 each: d ", 1 8 ", 1 a ", TCT hole cutter spare pilot bit, ejector spring and hex wrench. Cutters in the kit provide conduit entry for ½", ¾" and 1" conduit. Locke# T1134 Carbide Tipped Hole Cutter Kit

Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Concrete pavers. Diameters 3/4" through 4 8 ". Works in rotary and SDS Hammer mode. Works forward and reverse. Drill a hole through cement takes less than 7 seconds. Locke# T1138 1 a " Carbide Grit Hole Saw T1139 1½" Carbide Grit Hole Saw T1140 1¾" Carbide Grit Hole Saw T1141 2" Carbide Grit Hole Saw T1143 2½" Carbide Grit Hole Saw T1144 3" Carbide Grit Hole Saw T1145 3 s " Carbide Grit Hole Saw

ADJUSTABLE HOLE SAW

TUNGSTEN CARBIDE TIPPED HOLE SAWS

CARBIDE GRIT ELECTRICIAN’S KIT

Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug.

• Can cut drywall, plywood, plaster & acrylic sheeting up to 7/8 " thick (1¾" thick if opposite side can also be drilled.) • For cutting aluminum, brass and metal sheets up to z" thick. • Transparent cowl prevents chips from injuring user. • Can work with either variable speed hand drill or drill press. Locke# T3113 EL5000 1 x "-6 a " hole saw T3115 EL6000 2 - 8¼" hole saw T3114 EL5003 Ruler Axle for T3113 T3119 EL6003 ruler axle for T3115 T3124 EL5004A 1 n " Long Blade, Blade A for cutting drywall, wood and other soft materials.

Locke# T1122

3/4" Carbide Tipped Hole Cutter 7/8" Carbide Tipped Hole Cutter 1 8 " Carbide Tipped Hole Cutter 1¼" Carbide Tipped Hole Cutter 1 a " Carbide Tipped Hole Cutter 1½" Carbide Tipped Hole Cutter 1¾" Carbide Tipped Hole Cutter 2" Carbide Tipped Hole Cutter 2½" Carbide Tipped Hole Cutter 2 s " Carbide Tipped Hole Cutter 3" Carbide Tipped Hole Cutter ¼" Carbide Tipped Pilot Bit

T1123 T1124 T1125 T1126 T1127 T1128 T1129 T1131 T1132 T1133 T0929

T

| TOOLS Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Concrete pavers. Diameters 3/4" through 4 8 ". Works in rotary and SDS Hammer mode. Works forward and reverse. Drill a hole through cement takes less than 7 seconds. Contains 1 each: 7/8", 1 8 ", 1 a ", 1¾", 2", 2½". Arbors: 7/16" hex, 7/16" quick change, 1/4"

pilot bit. Locke# T1146

Electricians Carbide Grit Hole Saw Kit

T3125

EL5004B 1½" Long Blade, Blade B for cutting metal and cement plaster (stucco).

T3126

EL5001 Pilot Drill Bit

Mai„ Offic: 405-631-9701

1018

Fax: 405-631-0585