2025-26 Total Wheel Alignment Sourcebook

Parts 67475

HONDA/ACURA CAMBER ARM This track ready aluminum adjustable rear camber arm weighs less than the OE arm it will replace and features xAxis™ sealed flex joint to reduce compliance. The unique adjustment design permits on car adjustment of ±3˚ camber. Perfect for negative camber and reduced compliance for track setup and q adjustment back to OE specifications afte lowering. CIVIC REAR CAMBER ARM This track ready aluminum arm weighs less than the OE arm it will replace. The arm features SPC’s xAxis™ sealed flex joint to reduce compliance. Its unique adjustment design permits on-car adjustmen of ±3.0° camber. Whether you need negative camber and reduced compliance for the trac or want to get back to OE specifications after lowering, this is the arm for you. Includes bracket for installing on Type Rs. quick er nt e k r

Rear Adjustment range: Camber ±3.0° Required: 1 per wheel APPLICATIONS Acura: 2006 - 11 CSX 2013 - 22 ILX Honda: 2006 - 15 Civic

(Incl. Si and Hybrid)

67476

Rear Adjustment range: Camber ±3.0° Required: 1 per wheel APPLICATIONS Honda: 2018 - 22 Accord 2016 - 22 Civic

(Incl. Si and Type R) 2017 - 22 CR-V / Hybrid 2019 - 22 Insight

67478

HONDA REAR TOE CAM

Rear Adjustment range: Toe ±2.5° Required: 1 per wheel APPLICATIONS Honda: 2018 Accord

Take advantage of SPC’s extended cam kit to double the rear toe adjustment range on many Civic, CR-V and ILX models. Some increase can be gained by simply installing the kit, but using a rotary file like SPC # 85130 is required to take advantage of the full adjustment range. Use one kit for each side of the vehicle.

2016 - 21 Civic

(Incl. Si and Type R) 2017 - 22 CR-V / Hybrid 2019 - 22 Insight

67477

HONDA REAR TOE CAM

Rear Adjustment range: Toe ±2.5° Required: 1 per wheel APPLICATIONS Ford: 2008- 18 Focus 2013- 19 Escape Honda: 2018 Accord

SCION tC REAR ARM This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC’s. The Scion tC comes from the factory with a cam bolt that provides ±1.25°. Th factory change is not enough change fo lowered applications. By increasing the of the rear upper control arm SPC Perfo adds 2° positive camber to the rear sus that can then be dialed in with the OE c his or This extended toe cam kit will allow a full ±2.5° of toe change and features a hex chromate free finish that o ff ers a 700hr salt spray test for the best corrosion protection available. One kit is used for each side of the vehicle. The OE slot will need to be extended to take advantage of the full range of SPC’s cam. Use SPC rotary file #85130 or similar.

2016 - 21 Civic

(Incl. Si and Type R) 2017 - 22 CR-V / Hybrid 2019 - 22 Insight

67485

Rear Adjustment range: (Includes the camber adjustment built-in from the factory) Camber +3.25° Required: 1 per wheel

APPLICATIONS Scion: 2005 - 10 tC

e length ormance pension cambolt.

OE Replacement available #12025 See page 148.

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

95