2025-26 Total Wheel Alignment Sourcebook

Tools 40270 ools

TIE ROD ADJUSTING WRENCH SET (4) Every alignment tech needs this tie rod wrench set in their tool box. Adjust inner tie rods with this easy to use 4 piece wrench set. The TIE ROD/BALL JOINT/PITMAN ARM TO Five tools in one, this handy kit consists of three drop forged forks handles. One handle is for use with a hammer and one is designed an air hammer. All forks are threaded to interchange with either handle. Comes with 3 forks of 11/16”, 15/16” and 1-1/8” openings. (4) OOL antwo to fit VALVE STEM PULLER This easy to use valve stem puller protects the wheel and rim while you get the job done quickly. Simply screw the pivoting head onto the valve stem, slide the hard rubber protecting block to the edge of the wheel rim and remove the stem without rim scrapes or damage! Also works on 2 piece TPMS. UNIVERSAL TIE ROD ADJUSTING TOOL This economical tool fits most cars and light trucks with split tie rod sleeves. Double-end feature makes 360 degree turns possible. Service Sets UPPER CONTROL ARM BUSHING 40910 Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service set. Mechanical power screw quickly and easily removes worn bushings and installs them without damaging the control arm. Set includes C-Frame, screw assembly and all adapters to do the job quickly and correctly. Packaged in a durable plastic case. INCLUDES: 4427(3), 4428, 4429, 4430, 4431, 4432, 4433, 4434 TOYOTA CAM EXTRACTOR 40915 Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommend when installing our 25425, 25430, 25435, 25440, 25445 and 25450 replacement Toyota cams (page 79). INCLUDES: 4434, 44339 40920 PERFORMANCE BALL JOINT PRESS This tool was specifically designed to remove the original equipment ball 0 wrenches feature spring loaded toothed jaws and sturdy grips to make toe adjustments quick and easy. This set of wrenches fits tie rods from 10.5 to 19mm. Individual tools are also available: 40850 fits 10.5-12mm rods 40870 fits 14-16mm rods 40860 fits 12-14mm rods 40880 fits 16-19 mm rods

40310

40840 4084

40900 40910 40915 40920

40915

40923

4432

40925

4431

40927

4434

4433

44339

Cap 4435

4428

joints on smaller cars when installing SPC Performance’s sliding ball joints. With this revolutionary design you c remove the ball joint from the front upper control arm without removing the arm from the vehicle, saving tim and costs. Packaged in a convenient blow-molded pla case this set comes complete with adapters for remov and installing stock or Specialty Product’s sliding ball joints. INCLUDES (See right): 4433, 4434, 40923, 40925, 40927 ce s can m me astic ving

4429

4427 U-Adapter 4428 1/16” Thick Tube 4429 1/18” Thick Tube 4430 3/16” Thick Tube 4431 Forcing Head 4432 Receiving Socket 4433 Forcing Screw 4434 C-Frame 4435 Forcing Screw Cap 40925 Adapter

4430

4427

40923 Adapter

40927 Adapter 40929 C-Frame and Forcing Screw 44339 Sleeve Extracting Screw

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada 165 di ib d