2025-26 Total Wheel Alignment Sourcebook

Racing Builders xAxis ™ S ealed Flex Joint Features n Sealed joint retains grease and keeps out contaminants n Highly polished electroless nickel finish on ball maximizes durability eaed F

Electroless-nickel plated ball provides hard, smooth wear surface for long life Corrosion and wear resistant nylon inner sleeve reduces compliance Zinc plated retaining rings keep boot secure throughout increased joint travel Easily replaceable rubber boots protect joint from elements

n Up to 45° angularity for high mis-alignment requirements n Common sizes that builders and racers need Benefits n Reduced compliance and deflection vs rubber and poly joints n Improved durability vs spherical bearings and poly bushings n Increased angularity vs rubber and poly bushings n Engineered to be a direct fit for many popular street/race or HD o ff -road applications

Desi repla

igned to acemany l b hi

OE style bushings, SPC’s xAxis™ Sealed Flex Joint retains chassis design parame ters. xAxis™ is recommended for use as a replacement when higher performance of joint angularity is desired - perfect for race and o ff -road builders. SPC’

CAD Models Available for Builders

Go online to www. specprod.com for more on our xAxis and to download models of our xAxis which can be used in your designs.

xAxis™ Sealed Flex Joint

Weld-In Receivers with 2Snap Rings s

Part No.

Bolt Size (A) Width (B)

Outer Dia (C) Press

mm Inch mm Inch mm Inch Adapter

0.375 0.500 0.625 0.750

1.500 2.000 2.500 3.250 2.000 2.000 2.375 2.625 2.625

1.250 29607 1.750 29608 2.000 29610 2.500 29612 1.8125 29609 1.8125 29609 1.8125 29609 2.250 29611 2.250 29611 29605

15605 15607 15609 15611 15613 15615 15616 15619 15620 15623 15624 15625 15627 15629 15631 15633 15635 15637 15639 15641 15643 15647 15648

Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis™ sealed flex joint. Designed with optimal press fit for the xAxis these receivers include two snap rings for

10 12 14 14 16 12 12 10 12 12 12 12 12 12 14 14 12 14 14

15617 * 14

1.625 38.5

retention and an access window for easy snap ring removal.

40 48 40 42 45 47 50 50 57 40 50 48 50

40 40

29606 29606 29606 29606 29606 29606 29606 29606 29606 29606 29606 29606 29606

1.750 29608

40.2

Part

O.D.

Width ID Press

40 40 40 40 40 40 40 40 40

No.

(A)

(B)

(C)

Adapter

1.50” 0.82” 1.25” 29607 2.25” 1.12” 1.75” 29608 2.50” 1.25” 2.00” 29610 3.00” 1.56” 2.50” 29612 2.25” 1.07” 1.8125” 29609 2.75” 1.17” 2.25” 29611 47.6mm 27.3mm 40mm 29606

15520 15521 15522 15523 15524 15525 15526

40.2

44.5

* Bolt hole and width are designed for JK track bar bracket.

Bushing Press Adapters 29605, 29606, 29607, 29608, 29609, 29610, 29611, 29612 These adapters are designed for quick, easy removal of the old bushings and installation of SPC ’ s xAxis joints.

D x c 1 15620 Jeep xAxis™

Designed to replace the common 2-1/4” dia x 2-5/8” wide bushings in Jeep aftermarket control arms, and accomodates a 5/8” or 16mm bolt. Uses 29611 Adapter, right.

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada d t i f 1 800 52

160

159