2025-26 Total Wheel Alignment Sourcebook

Replacement REPLACEMENT BALL JOINTS These ball joints can be used 67245

Rear/Front Upper Replacement Part Required: 1 per wheel APPLICATIONS FRONT Acura: 1990 - 01 Integra: 1991 - 96 Legend 1996 - 01 RL; 1996 - 98 3.2TL Honda: 1992 - 00 Civic; 1997 - 01 CR-V 1992 - 97 Del Sol; 1997 - 02 Prelude

as a replacement ball joint for several Honda and Acura vehicles. Check out SPC’s 67265 (page 90) rear extented range for adjustable arm.

40 Jo 0920 - Perf. Ball oint Press, pg 170

Check out adjustable options on pages 89 and 90

72062 Set of 4 with Adaptors 15645 Single Joint

COBRA IRS XAXIS™ JOINT KITS Replace worn rear knuckle cross axis ball joints on the IRS Mustang Cobra with xAxis™ joints from SPC Performance. xAxis™ ball joints feature highly pol ished electro-less nickel plated balls, corrosion and wear resistant moly inpregnated nylon races, and dust boots to keep contaminants out & ensure long life. xAxis joints come pre-greased and are designed to be maintenance free. Order part #72062 for the complete set to replace all 4 rear knuckle cross axis ball joints, along with the correct press tool adapters. Need only a single rear knuckle ball joint? Order part #15645. With the single xAxis use SPC press adapters #29606 and #29610 to make installation a snap. Don’t have a press tool? Use SPC #40940.

Rear Replacement Part Required: 1 per axle APPLICATIONS Ford:

1999 - 04 Mustang Cobra

40920 - Perf. Ball Joint Press, pg 170

87550 87555

XAXIS™ JOINT KITS Replace worn rear lower control arm cross axis ball joints on the Lincoln LS and Ford Thunderbird (#87550) or Jaguar S-Type (#87555) with SPC xAxis™ Sealed Flex Joints. xAxis™ joints are pre-greased and feature highly polished electro-less nickel plated balls,

Rear Replacement Part Required: 1 per axle 87550 APPLICATIONS Ford: 2002 - 05 Thunderbird Lincoln: 1999 - 06 LS 87555 APPLICATIONS Jaguar: 1999 - 08 S-Type

moly impregnated nylon races, and dust boots to keep contaminants out & ensure

long life. These kits include four (4) xAxis™ joints and two (2) press tool adapters to service a complete rear end.

40920 - Perf. Ball Joint Press, pg 170

Why OE Replacement Parts? Specialty Products is expanding our line to include select OE replacement parts. As we design adjustable parts for vehicles SPC’s engineers refer to the OE parts for fitment and OE ride quality. As these parameters are met, SPC is seeing opportunities in co-designing a non-adjustable replacement part that meets or exceeds the standards of the factory part, often at substanial savings over the cost of an OE part. With the introduction of our xAxis™ Sealed Flex Joints SPC has the ability to retain factory NVH (Noise, Vibration and Harshness) standards on man adjustable and replacement parts. H ny

#12030 Non Adjustable Replacement Part

#67487 SPC Adjustable Part

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

154

155