2025-26 Total Wheel Alignment Sourcebook

Replacement HONDA REPLACEMENT LOWER BALL JOIN 12715

Front Replacement Part Required: 1 per wheel APPLICATIONS Honda: 2018 Accord 2016 - 21 Civic (not Type R) 2017 - 22 CR-V DOES NOT FIT CIVIC TYPE R

NT ball , m

Replace your worn or damaged factory lower b joint on the front of the late model Civic, CR-V, or Accord with this replacement ball joint from SPC. This ball joint uses high quality components for a long service life.

Need extended camber adjustment? Consider SPC #67381 & #67382 (page 92).

16110 16115

4RUNNER BUSHINGS

REAR Replacement Part Required: 1 per wheel APPLICATIONS Toyota: 1996 - 02 4Runner

ugh

Replace worn out bushings on your 1996 throu 2002 Toyota 4Runner trailing link (16110) and lower track bar (16115) with these replacement bushings from SPC. These bushings are sold each and fit both the inboard and outboard location on these arms.

16210

SUBARU BUSHING Replace the worn bushing on the onboard in of the rear lower control arm on many Subaru models from the 2000’s. Need 2000 – 2009 Applications Replacement Bushing Location

REAR Replacement Part Required: 1 per wheel APPLICATIONS Subaru: 2003 - 06 Baja 2013 - 18 BRZ,Crosstek 2009 - 18 Forester 2008 - 18 Impreza (inc STi, WRX) 2010 - 18 Legacy, Outback 2009 - 14 Tribeca

the toe cam adjuster too? Check out SPC #67668 on page 101.

2010 – 2018 Applications Replacement Bushing Location

16310

JEEP BUSHING Replace your worn front lower control arm bushings on the 2018 and newer Jeep Wrangler (JL) or Gladiator (JT) with this replacement bushing from SPC. Sold each, use two bushings per control arm, up to four per vehicle. Need caster or front pinion angle adjustment? Consider adding SPC# 82375 at the same time, found on page 125. s FORD BRONCO CONTROL ARM HARDWARE The front upper control arm mounting bolts on the Ford Bronco are frequently corroded and must be cut out when removing or replacing the control arm. This hardware replacement kit allows quick and easy re-installation of the upper control arm. This long bolt and nut kit will service the control arm hardware on one side of the vehicle.

REAR Replacement Part Required: 2 per wheel APPLICATIONS Jeep:

2018 - 22 Wrangler, Gladiator

21015

FRONT Replacement Part Required: 1 per wheel APPLICATIONS Ford: 2020 - 25 Bronco

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

152

153