2025-26 Total Wheel Alignment Sourcebook

Parts

GM Muscle Car Adjustable Upper Control Arms This patented design will give you the most adjustability and best clearance of any arm on the market. Sold as a pair, these adjustable arms come with ball studs that are 1/2” taller than stock to improve camber curve. Throw in some caster and the ability to tune camber and you will have a ‘modern’ feeling suspension. The ball joints are grease-able and rebuildable. Additionally, OE length and 1/4” extended studs are available to tune your ride or maximize your specific suspension geometry. Consider combining these with SPC’s lower control arms (page 135) and 1” lowering springs (page 136) to complete the transformation of your Pro Touring, Track Ready, or daily driving street use American Muscle. Sold as pairs.

‘A’ BODY Pair 97110 P

Front Adj. range: Camber ±3.00° Caster ±3.00° Required: 1 per axle APPLICATIONS Buick: 1973 - 74 Apollo Chevrolet: 1967 - 69 Camaro; 1968 - 74 Nova Pontiac: 1967 - 69 Firebird Front Adj. range: Camber ±3.00° Caster ±3.00° Required: 1 per axle APPLICATIONS Buick: 1964 - 72 GS, Skylark, Special Chevrolet: 1964 - 72 Chevelle, El Camino, Malibu 1970 - 72 Monte Carlo Oldsmobile: 1964 - 72 442, Cutlass Pontiac: 1964 - 72 GTO, LeMans; 1964 - 70 Tempest Front Adj. range: Camber ±3.00° Caster ±3.00° Required: 1 per axle APPLICATIONS Buick: 1971 - 85 LeSabre; 1973 - 77 Century, Regal 1975 - 79 Skylark Chevrolet: 1970 - 81 Camaro; 1973 - 96 Caprice 1973 - 77 Chevelle;1973 - 77 El Camino, Malibu, Monte Carlo; 1973 - 96 Impala; 1975 - 79 Nova Oldsmobile: 1973 - 77 Cutlass; 1975 - 79 Omega, 1971 - 85 88 Front Adj. range: Camber ±3.00° Caster ±3.00° Required: 1 per axle APPLICATIONS Buick: 1978 - 87 Grand National, Regal Chevrolet: 1978 - 88 El Camino; 1978 - 83 Malibu 1978 - 88 Monte Carlo 1982 - 04 Blazer S Series, Jimmy S Series, S10/S15 Pickup/Sonoma (RWD) Oldsmobile: 1978 - 88 Cutlass Pontiac: 1982 - 86 Bonneville; 1978 - 80 Grand Am 1978 - 87 Grand Prix; 1978 - 81 LeMans Pontiac: 1971 - 76 Bonneville; 1970 - 81 Firebird 1973 - 75 Grand Am; 1973 - 77 Grand Prix, LeMans

Greaseable Performance Bushings Avail. #92025 pg 157

US Patent No. 9,751,370

Lower Arms page 135, Pro Springs page 136 Lower Arms page 135 Pro Springs page 136

Stud Taper 7.12°

1ST GEN. ‘F’ BODY Pair 97120

Greaseable Performance Bushings Avail. #92025 pg 157

Lower Arms page 135, Pro Springs page 136 Stud Taper 7.12° US Patent No. 9,751,370

2ND GEN. ‘F’ BODY ‘B’ BODY Pair 97130

Greaseable Performance Bushings Avail. #92025 pg 157

US Patent No. 9,751,370

Stud Taper 9.5°

Lower Arms page 135, Pro Springs page 136

‘G’ BODY air 97140

Pa

Greaseable Performance Bushings Avail. #92025 pg 157

US Patent No. 9,751,370

Lower Arms page 135, Pro Springs page 136

Stud Taper 9.5°

Ball Joint Rebuild Kits With SPC’s rebuild kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Includes: ball joint boot, ball stud, ball joint race, washer, wave spring, castle nut, cotter pin.

97001 97002 97003 97007 Ball Joint # Taper Stud Length Fits Part # 97110, 97120 97150, 97170 97260, 97300 7.12° OE length 7.12° +0.25” stud 7.12° +0.50” stud 7.12° +0.25” stud

Ball Joint # Taper Stud Length Fits Part #

97004 97005 97006 97008 97009

9.5° 9.5° 9.5° 9.5° 9.5°

OE length +0.25” stud +0.50” stud +0.25” stud +0.50” stud

97130, 97140 97180 97183

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

141