2025-26 Total Wheel Alignment Sourcebook

Parts 94220

MUSTANG ADJUSTABLE CASTER ROD - (64-66) If you are running modern radial tires you should not follow factory alignment specifications for caster, SPC recommends 3˚ of caster to promote return to center steering. Stock strut rods on 1st gene r ration

Front Adjustment range: Caster ±2.00° Installation time: .5 hr/side Required: 1 per wheel APPLICATIONS Ford: 1964.5 - 66 Mustang 1964 - 65 Falcon 1964 - 65 Ranchero Mercury:

Mustangs are non-adjustable and often ha bushings that can cause unwanted mov the lower rod assembly and poor handling

aveworn ement of g. Amust aster rod shings to e and has strut rod

for early Mustangs, SPC’s adjustable c features high durometer OE-style bus protect the chassis mount from damage easy caster adjustment. This adjustable strut rod will provide the positive caster needed for improved tracking and modern geometry. If you want additional caster or want to adjust camber, check out SPC control arm kit #94218 .

1964 - 65 Comet 1964 - 65 Cyclone

94230

MUSTANG ADJUSTABLE CASTER ROD - (68-73) If you are running modern radial tires you should not follow factory alignment specifications for caster. SPC recommends 3° of caster to promote return to cente nt er

steering. Stock strut rods on late 1st generation Mustangs (‘68-’73) are non-adjustable and often have worn bushings that can cause unwanted movement of the lower rod assembly and poor handling. A must for early Mustangs, SPC’s adjustable caster rods features high durometer OE-style bushign protec the chassis mount from damage has easy caster adjustment. These a strut rods will provide the positive caste

APPLICATIONS ‘ A ’ Bodies& 1st Gen. ‘ F ’ Bodies 94348 2 Spacers 94346 4 Spacers 2ndGen. ‘ F ’ Bodies, ‘ B ’ Bodies & ‘ G ’ Bodies 95338 2 Spacers 95332 4 Spacers Front Adjustment range: Caster ±2.00° Installation time: .5 hr/side Required: 1 per wheel APPLICATIONS Ford: 1968 - 69 Fairlane 1968 - 70 Falcon 1968 - 73 Mustang 1968 - 71 Torino Mercury: 1968 - 69 Comet 1968 - 73 Cougar 1968 - 71 Cyclone

ns to

e and adjustable er needed ometry. If

for improved tracking and modern geometry. If you want additional caster or want to adjust camber, check out SPC control arm kit #94219 .

94346 94348

COILOVER MOUNT/SPACER PLATES These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use these plates as coilover mounts to augment coil stability on SPC’s tubular lower arms. If you need to fine-tune your

95332 95338

ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2” or add two spacers per side to gain about 1” in ride height.

95339

GM REPLACEMENT BUMP STOP OE cone style to replace worn bump stops on m any GM models.

Featured Owner: David Cox David Cox restores classic Mustangs and provided our test platform for our #94213 & #94218 adjustable front arm and caster rod. Dave’s feedback on the new set-up was great, “The handling on these older cars is really lacking, but SPC’s arms improved tracking, added additional adjustability and are well built.” F

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada 139