2025-26 Total Wheel Alignment Sourcebook

Parts 87525

NISSAN FRONT CAM/CASK

Front Adj. range: Camber/Caster ±2.00° Required: 1 per wheel 87525 APPLICATIONS Nissan:

KIT n

DANA 60 AXLE CAM/CAS KITS These exclusive kits provid a camber and caster chang for Dana 60 Axles. Replace the OE bushing with the correct eccentric bushing, rotate to adjust caster/ camber and lock in place. These kits provide full adju ment for future alignments T-BIRD/LS FRONT CAM/CAS KIT (4) These kits install in the lower control arms and provides easy and precise adjustment for caster and camber without any further modifications. place. Use this replacement cam kit to restore the factory adjustment for front camber and caster change. Sold per wheel. Order two kits to service both sides of the vehicle. Many times factory adjusters can become corroded and freeze in e e st- .

2016-2022 Nissan Titan XD 2012-2022 Nissan NV1500, NV2500, NV3500

87540 87545

Front Adj. range: Camber ±1.00°/Caster ±2.00° Required: 1 per axle 87540 APPLICATIONS Ford: 2002 - 06 Thunderbird 87545 APPLICATIONS Jaguar: 2000 - 02 S-Type Lincoln: 2000 - 06 LS Replacement rear lower contol arm joint kits are available for these vehicles - see page 155 Front Adjustment range: Cam/Cas ±1.00° Required: 1 per wheel MONOBEAM - DANA 60 APPS Chevrolet/GMC: 1988 - 93 K30, V30, V3500 Dodge: 1972 - 83 W200/250 1975 - 93 W300/350

KKEY SHING HEX 88940 BUS 8

LOC

TEFLON WASHER

Ford:

1974 - 79 F250 1974 - 91 F350

International:

1960 - 71 Pickup (1300)

89199

UNI-WEDGE SHIMS (HD ZINC ALLOY) Twice the coverage - half the

For more shims check out our complete Heavy DutyTruck Section on pages 140-147. For additional shim widths see page 147

89899

inventory. Changes caster positive or negative from 1/2° to 4°. APPS: Any solid axle RWD or 4WD vehicle.

Degree

Degree

No.

Width Taper Qty No.

Width Taper Qty

89199 3”- 3-1/2”- 4” 1/2° 89299 3”- 3-1/2”- 4” 1° 89399 3”- 3-1/2”- 4” 1-1/2° 89499 3”- 3-1/2”- 4” 2°

6 89599 3”- 3-1/2”- 4” 2-1/2° 6 89699 3”- 3-1/2”- 4” 3° 6 89799 3”- 3-1/2”- 4” 3-1/2° 6 89899 3”- 3-1/2”- 4” 4°

6 6 6 6

Double Breakaway

89635 89685

FORD CAMBER KIT (PR) This kit provides front camber adjustment on many popu lar Ford vehicles.

Front Adjustment range: Camber 0° to +1.25° Required: 1 per axle 89635 APPLICATIONS Ford: 1996 - 07 Taurus Sedan 1996 - 05 Taurus Wagon Mercury: 1996 - 06 Sable Sedan; 1996 - 05 Sable Wagon 89685 APPLICATIONS Ford: 2004 - 07 Freestar; 1994 - 03 Windstar Mercury: 2004 - 07 Monterey

Camber adjustment of up to 1.25°. These plates are sold in pairs, one for each side of the vehicle.

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

137