2025-26 Total Wheel Alignment Sourcebook

Parts 86220

ALIGNMENT CAS/ CAM BOLT KIT Replace damaged or corroded factory adjusters on the new Ford Rangers and Broncos with this replacement cam kit from SPC. This kit is designed to replace the factory adjusters on the front lower control arm and provide the same adjustment range as the factory part it is replacing.

Front Adjustment range: Cam/Cas ±1.0° Required: 1 per wheel APPLICATIONS Ford: 2021-24 Bronco 2019-24 Ranger

86250

FORD ADJUSTABLE CAM NUT/BRACKET (PR) The innovative cam nut and sturdy bracket saves time and money. Easily adjust camber and caster on F150’s and Expeditions. Save time since you don’t have to remove the OE

Front Adjustment range: Camber ±1.00° Caster ±1.50° Required: 1 per wheel APPLICATIONS Ford RWD/4WD: 2007 - 17 Expedition 2004 - 24 F150 2010 - 20 Raptor Lincoln:

bolt or stabilizer bar. The sturdy guide bracket allows for live adjust ment on the lower control arm. This product is a must have every time these vehicles enter your shop!

2006 - 08 Mark LT 2007 - 17 Navigator

86252

RAPTOR & F150 HD CAM NT CAM/CAS KIT (PR) vy-duty cam-bolt kit was specifically d for the extreme Raptor and F-150 Whether you are an energetic Raptor river or abuse your F-150 in the fields and on the job site, you may have found that the OE bolts slip or that a ngle cam option does not hold ment. This upgraded cam kit features ms and bosses per bolt. The two cams p your bolt square and make ent easier while the new bolt and low friction finish achieve 25% more clamp load than the OE hardware. Some drilling is required to accommodate the second boss plate. This kit is sold per wheel and fits Raptors, non-Raptor F-150’s and related SUVs. RAPT FRON This heav designed user. d a f sin alignm two cam will keep adjustme friction fi

Front Adjustment range: Camber ±1.00° Caster ±1.50° Required: 1 per wheel APPLICATIONS Ford RWD/4WD: 2007 - 17 Expedition 2004 - 24 F150 2010 - 20 Raptor Lincoln:

2006 - 08 Mark LT 2007 - 17 Navigator

SPC also carries an adjustable upper control arm for late and current models of the popular F150. See page 80 for options for both lifted and lowered vehicles, perfect to achieve greater droop travel, move oversized tires in the wheel well and improve drivability and tracking.

86255

F150 PINION ANGLE SHIMS (PR) This wedge-type shim fits the 2 hole design of this platform between the rear spring and the axle to change pinion angle and align the driveline on vehicles that have been lowered or lifted.

Rear Adjustment range: Pinion ±2.50° Required: 1 per axle APPLICATIONS Ford: 2004 - 20 F150

64225 - Angle Gauge, pg 167

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

130