2025-26 Total Wheel Alignment Sourcebook

Parts Mustang S550

72360 0

MUSTANG REAR MUSTAN PERFORM PERFOR

Rear Adjustment range: 72360 Camber +2.00° to -3.00° Toe ±3.0° Required: 1 per axle 72370 Camber +2.00° to -3.00° Required: 1 per wheel 72380 Toe ±3.0° Required: 1 per wheel APPLICATIONS Ford: 2015 - 23 Mustang

MANCE KIT (4) Get the optimum track set-up with SPC’s 4-arm set. This set includes 2 each of the #72370 and #72380 (below). With agressive handling and maximum G’s, track vehicles require the best adjustment,

reduced weight vs the OE arm and strength. These aluminum forged arms give you a complete solution for your track eady S550. extra a re

72370

MUSTANG REAR CAMBER ARM Add a little horsepower, use grippy tires, launch hard, and take a corner at 1.5 G’s. You adjustable rear control arm to optimize your tire contact by adjusting your cam confident your arm is proven and reliable for the >1,000 pounds of force that it oaded with over and over again as you put your Mustang to the test. Designed, red, tested, and assembled in Colorado. SPC’s forged T6 aluminum link will pro vide; +2 to -3 degrees of camber adjustment, reduced weight vs the OE arm and exceed its strength. SPC’s adjustable arm features high rate rubber bushings to maintain OE noise, vibration, and harshness (NVH) and has a 1.5” hexed eccen tric insert at the uckle end e armto easily adjust cam ber without removing the tire. All hardware is included and fea Add a lit need an ber. Be c will be lo engineer v e m t a kn of the easily ad M

US Patent No. 10,450,005

tures hex chro mate free finish (certified to 700 hour salt spray test standards) for rust free long life.

74400 - Wrench, pg 170

72380

MUSTANG REAR TOE ARM Upgrade your rear suspension for added toe adjustment and less weight with this pg y

p aluminum control arm from performs like a monoball, b like an OE bushing. Fully fo confidence on the trac rigo l

m SPC. This lower arm features a xAxis sealed flex joint that but uses non-metal bushings which are designed to last orged with T6 aluminum, this high strength arm will inspire ck while withstanding the

OE Replacement

ors of street driving. Included ockout cam will replace the factory toe cam to make sure your alignment settings aren’t changing during cornerning. c

arm on page 152 #12050 - Check out our weight-saving toe

72450

LEXUS REAR CAMBER LINK Use this adjustable rear upper control arm to replace the OE arm and get ±3° of camber. SPC’s djustable camber link is manufactured from igh-grade aluminum, is easy to adjust on car, ncludes a mounting bracket for the ABS wire, nd has OE style bushings to maintain factory ride quality. Whether you want a cambered look, are heading to the track, or want to save the tread life on your tires, these arms are for you. L U r ad h in an i

Rear Adjustment range: Camber ±3.00° Required: 1 per wheel APPLICATIONS Lexus: 2014 - 21 IS Except Convertible

2013 - 20GS 2015 - 22RC

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

114