2025-26 Total Wheel Alignment Sourcebook

Parts FULL CONTACT REAR SHIMS CAMBER/TOE Part No. Change 71020 .06° 71021 .13° 71022 .25° 71023 .38° 71024 .50° 71025 .75° These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1.0° may be achieved by using 2 shims on each wheel. 71000 SHIMSET Includes 12 shims/2 each size 71000 SERIES S NOTE: DoNOT adjust Camber or Toe over 1.0°

Rear Adjustment range: Camber ±1.00°/Toe ±1.00° Required: 1 shim per wheel/ per angle changed APPLICATIONS Toyota FWD:

1998 - 10 Sienna 2011 - 17 Juke 2011 - 17 Leaf

Nissan FWD:

EZ Cam™ EZ Sizer Magnet #20503 (pg 180) This magnet sticks on the installer’s tool box, out of the way, and is a quick reference tool for measuring the right EZ Cam™ for the job!

71030 SERIES 71050 SERIES SER

GM REAR TOE AND CAMBER SHIMS

Rear Adjustment range: Camber ±1.00°/Toe ±1.00° Required: 1 or 2 per wheel 71030 Series APPLICATIONS Buick: 2012 - 17 Verano Cadillac: 2014 - 16 ELR Chevrolet: 2011 - 19 Cruze 2011 & Up Volt 71050 Series APPLICATIONS Buick FWD: 2013 - 23 Encore Chevrolet FWD: 2012 - 20 Sonic 2015 - 22 Trax

Make rear wheel alignment changes on these twist beam axles with SPC’s stackable fixed change shims. Change camber in ±.25° increments and toe in ±.10° increments. Combine a toe shim with a camber shim to get the exact change required. Stack up to two shims for maximum change.

71030 SERIES

Change

CAMBER Change

TOE 71031 71032 71033 71034 71035 TOE 71051 71052 71053 71054 71055

± .10° ± .20° ± .30° ± .40° ± .50° ± .10° ± .20° ± .30° ± .40° ± .50°

71041 71042 71045 71046

+.25° +.50° -.25° -.50°

71030 SHIMSET Includes 18 shims/ 2 eachof 71031-71035 and 71041-46

71050 SHIMSET Includes 18 shims/ 2 eachof 71051-71055 and 71061-71066

71050 SERIES

Change

CAMBER Change

71061 71062 71065 71066

+.25° +.50° -.25° -.50°

71070 SERIES

RIO/ACCENT REAR SHIMS The twist beam axle on the rear of the Kia Rio and Hyundai Accent does not give you any method to adjust toe. Correct toe and thrust angle issues to improve drivability and increase tire life with these full contact shims.

Rear Adjustment range: Toe ±.50° Required: 1 per wheel APPLICATIONS Hyundai:

2012 - 17 Accent

Kia: 2012 - 17 Rio CAUTION: Do NOT stack this shim. * Includes brake caliper shim

71070 SHIMSET Includes 8 shims/2 each size

TOE Part No. Change 71071 ± .13° 71072 ± .25° 71073 ± .38° * 71074 ± .50° *

come a Certified Installer th our FREE online certification program, alignment techs can become an SPC Certified Installer. Developed by our ASE Master Certified technician, this program focuses on providing expertise in alignment aftermarket parts and installation procedures along with cutting edge problem solving. For more go online to: www.specprod.com/certifiedinstaller or email: training@specprod.com With b p w Be

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada 105