2025-26 Total Wheel Alignment Sourcebook

Parts SUBARU ADJUSTABLE REAR CONTROL ARM KIT Fully adjust camber and toe on the rear suspension of your Subaru Outback Legacy

67664 67665 67666

nsion of your Subaru Outback, Legacy o ff ers a full ±2.5° of camber and nment specifications. nges, prepare for kit

or Baja with this two arm kit from SPC. This kit toe change so you can get back to factory align Whether you need to adjust for ride height cha the track, or correct for suspension wear, this k will provide maximum suspension adjustability.

67666

Rear Adjustment range: 67664 Camber/Toe ±2.50° Required: 1 per axle 67665 Camber ±2.00°

67665

67665 - SUBARU ADJ CAMBERARM Dial in ±2.0° of rear camber with this remove and replace arm that has bonded rubber bushings to match chassis design parameters and includes the ride height sensor bracket that is needed on some applications. Because of the constraining 5-link suspension design, you will need to slot the frame bracket on the upper control arm to allow the knuckle to pivot for camber change. SPC recommends punch #74940 tomake the job quick and easy.

67666 - SUBARU REAR LOWER ADJ TOEARM Easily adjust rear toe on Subaru Legacy, Baja and Outback models with this adjustable control arm from SPC. This arm provides ±1.0° change with easy on-car turnbuckle style adjustment. The kit also includes replacement control arm hardware coated in our 700 hr salt spray tested hex chromate-free finish for long life. Need rear camber adjustment? Consider purchasing SPC camber arm #67665 .

Required: 1 per wheel 67666 Toe ±1.00° Required: 1 per wheel APPLICATIONS Subaru: 2003 - 06 Baja

2000 - 09 Legacy 2000 - 09 Outback

74940 - Punch Tool, pg 169 85125 Rotary File pg 173

Patent No. US 8,746,714

67667 67668

SUBARU ADJUSTABLE REAR TOE KIT Need to replace corroded or damaged OE toe cam bolts on the rear of the 2000 to 2009 Subaru Legacy, Outback and many more? SPC gives you options. 67667 is a replacement many .

Rear Adjustment range: 67667 Toe ±1.50° Required: 1 per wheel 67668 Toe ±1.50° Includes Repl. Rubber Bushing

67668 Inc. Repl. Bushing

Required: 1 per wheel APPLICATIONS Subaru: 2003 - 06 Baja

cam kit. 67668 includes a replacement bushing. Get up to ±1.5° of toe change and then lock it in place with these economical options. One kit is required per side or two for the entire vehicle. d e

2000 - 09 Legacy 2000 - 09 Outback 2006 - 10 Tribeca

67668 Replacement Bushing Location

67675

SUBARU REAR TOE CAM

Rear Adjustment range: Toe ±3.0° Required: 1 per wheel APPLICATIONS Subaru: 2020 - 24 Outback 2020 - 24 Legacy

This Adjustable Rear Toe EZ Arm for Subaru models provides extended toe adjustment required to compensate for camber changes. The toe arm incorporates an integrated OE style ball joint and features easy, on-car adjustment for positive or negative toe as needed.

2018 - 23 Crosstrek 2019 - 24 Forester 2017 - 23 Impreza 2022 - 24 WRX

100 Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

101