2022-2023 Wag-Aero Catalog
Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 67
STACK, COLLECTOR REPAIRS Stack and collector assembly repairs vary in the amount of work required. The following information is supplied to you for estimating purposes only. Accurate pricing can only be obtained when sending your unit in for complete inspection and quotation. All Code 4
Now in our 61 st YEAR! FRIENDLY CUSTOMER
SERVICE & TECHNICAL SUPPORT!
n Exhaust Stack, Collector Repairs Aircraft Models
Before
OEM P/N
Cat. No.
Price
Cessna
$571.50 $85.75 $96.30 $86.00 $215.60 $284.50 $137.50 $218.60 $97.30 $53.00 $307.50 $137.50 $86.00 $96.30 $137.50 $218.60 $97.30 $53.00 $312.50 $433.10 $85.75 $96.30 $187.50 $187.50 $137.50 $218.60 $97.30 $53.00 $187.50 $187.50 $109.70 $137.50 $218.60 $97.30 $53.00 $260.00 $260.00 $260.00 $329.50 $399.95
Turbo 205, 206, 207 & 210 stack LH 250860-203 A-419-000
Flange Repl. 4 hole Cont Flange Repl. 2 hole Lyc Flange Repl. 2 hole Cont Slipjoint Repair 2-1/8” Slipjoint Repair 2-5/8”
A-900-000 A-901-000 A-920-000 A-923-000 A-924-000 A-904-000 A-903-000 A-905-000 A-909-000 A-515-000 A-515-100 A-920-000 A-901-000 A-904-000 A-903-000 A-905-000 A-909-000 A-511-000 A-514-000 A-900-000 A-901-000 A-922-000 A-902-000 A-904-000 A-903-000 A-905-000 A-909-000 A-922-000 A-902-000 A-910-000 A-904-000 A-903-000 A-905-000 A-909-000 A-724-001 A-724-002 A-726-000 A-325-000 A-513-000
After
End Repl
Elbow Repl
All Units YELLOW TAGGED
Large Sec. 3” x 4”
Small Sec. 1-1/2” x 2”
1.800.558.6868
Piper
764-331, 332, 335, 336
PA-36 300/375 stack
PA-60 Aerostar stack AFT PA-60 Aerostar stack FWD Flange Repl. 2 hole Cont Flange Repl. 2 hole Lyc
CABIN HEAT BOXES
End Repl
Elbow Repl
Large Sec. 3” x 4”
Small Sec. 1-1/2” x 2” Turbo Baron tailpipe
Beech
M-913-000
M-913-002
M-917-100
M-917-200
96-95002-55, 59, 61
Beech Baron stack
Duke 60, Turbo exhaust tailpipe
Flange Repl. 4 hole Cont Flange Repl. 2 hole Lyc Balljoint Repair Cont
M-914-001
M-914-000
M-914-002
M-914-003
Balljoint Repair Lyc
Cabin Heat Boxes (Cabin Heat Shuttles) These deluxe Homebuilder’s cabin heat boxes have one 2” O.D. inlet and two 2” O.D. outlets with the second outlet used to route warm air away from the low plenum area when not using heat in the cabin. Fabricated from aircraft-grade aluminum with stainless steel shaft, arm and fl apper. Comes with a gasket fl ange and four stainless steel blind rivets for mounting on the forward side of the fi rewall. All Code 8 Description Cat. No. Price Homebuilder’s Cabin Heat Box P/N DL-002 M-913-000 $142.85
End Repl
Elbow Repl
Large Sec. 3” x 4”
Small Sec. 1-1/2” x 2” Balljoint Repair Cont Balljoint Repair Lyc Balljoint Repair Mooney
Mooney
Homebuilder’s Cabin Heat Box All Stainless This box is identically con fi gured to the box above, but constructed entirely of stainless steel. P/N DL-006 Warm/Cool Air Mixer This unit has a fl apper to direct cool air from one side and/or warm air from the other side. It is designed to be riveted or bolted to the fi rewall. The shaft, arm, and valve are all stainless steel. The bushings are brass and the tubing is 2” O.D. 6061-T. Hose clamp, gasket and four blind rivets are furnished with the part. P/N DL-016. Designed to fi t with the Shut Off Valve below. Shut Off Valve This unit is expanded on one end to 2” I.D. to slip over a 2” O.D. tube to regulate or shut off air. (It is also available for in-line applications.) The bushings are brass and the tubing is 2” O.D. 6061-T. The shaft, arm and fl apper valve are all stainless steel. A stainless steel hose clamp is furnished with this part. P/N DL-019. Designed to fi t with the Warm/Cool Air Mixer above. 2” Dia. Non-Expanded “Y” Tube Used with the cabin heat box to route warm air to two or more locations. Includes one stainless steel hose clamp. P/N DL-010 Tubing Connectors 2” Aluminum Flange Accepts 2” scat tubing. Allows riveting to fi rewall, baf fl es, etc. P/N DL-011 2-1/2” Flanged Duct Square plate with 2” tubing projecting 1” from each side. P/N DL-012 Carb Heat Connector Mounts on airbox. Standoff design allows hot air to escape when carb heat is not selected. P/N DL-013
$146.85
M-913-002
End Repl
Elbow Repl
Large Sec. 3” x 4”
$98.50
M-917-100
Small Sec. 1-1/2” x 2” 17-31A, LH tailpipe 17-31A, RH tailpipe 17-31ATC, RH tailpipe
Bellanca
191927-0 191927-1 191654-0
$68.15
M-917-200
All assembly repairs vary in the amount of work required. The following information is supplied to you for estimating purposes only. Accurate pricing can only be obtained when sending your unit in for complete inspection and quotation. PLEASE CALL FIRST. 1.800.558.6868
$44.12
M-914-000
$18.85
M-914-001
$23.00
M-914-002
$26.95
M-914-003
Made with FlippingBook - Online magazine maker