WL May Distributor Vol. 4

Charging Hoses & Tube Benders

Unit#3335095

PRESSURE CONTROL HOSES

High Temperature Consists of thermoplastic poly- mer inner tube and cover to eliminate vibration failures. Polyester braid reinforcement with high tensile strength and high modulus withstands high pressures. 4000 PSI minimum burst; 800 PSI maximum work- ing pressure. -49°F to 266°F operating temperature. 1/4” straight x 90°. Yellow.

Unit#3078107

CHARGING HOSES

Plus II™

Order No. 78724 78736

Length In.

24 36

Unit#3335095

TUBE BENDERS

Spring

Features SealRight™ anti-blow back fitting and 45° end. Gaskets resist deterioration from existing refrigerants and oils.

Order No.

Desc.

Length Pack

3 RYB - Yellow, 1 Yellow - (3/8” str x 3/8” 45° Quick Coupler)

21990

60''

4

Unit#2744093

CHARGING HOSE ACCESSORIES

60360

1/4”

60352

Fits over soft copper and aluminum tubing during bend- ing to prevent tube collapse. Silver plated finish. Meets federal specifications.

Order No.

For Tubing OD In. Individual Benders

60354 60355 60356 60357 60358 60359 60360 60361 60351 60352 60353

1/4

Chrome fittings. Specially formulated rubber tube resists most refrigerants. Blow-off groove channels refrigerant to prevent spray back. 1/4” straight x 1/4” 45° angle fit- ting. 2500 PSI minimum burst and 500 PSI maximum working pressure.

5/16

3/8

7/16

1/2 5/8 3/4

Order No. 19010 19020 19302

Desc.

1/4” Gasket (6); valve depressor (3)

Replacement gasket (10) Adjust-A-Valve opener (10)

7/8 Bender Sets

Charging Hoses & Tube Benders

1/4, 5/16, 3/8, 7/16, 1/2 & 5/8

1/4, 3/8, 1/2 & 5/8 1/2, 5/8, 3/4 & 7/8

Tubing Benders, Charging Hoses & Dye Injector Kits

This information is provided “as is” without warranty of any kind by any person, including without limitation, the owner and the publisher.

724