Shoppa's Material Handling 2021 Industrial Products Catalog

H ATCH N ETTING Hatch Netting Installation Details Installation Details

The Hatch net safety system can be installed on any standard aluminum or steel floor access, roof hatch, or custom sized framed opening. Brackets may also be installed directly to concrete with supplied anchors. Net Installation Process Install the mounting brackets to structure at corresponding locations to the snap hooks sewn into the net. A typical installation would have one bracket for each corner and intermediate brackets placed evenly spaced around the net’s perimeter. Bolting to Aluminum or Steel Structure Mark the location of the hole to correspond with the snap hooks located on the net. Drill each hole in the structure. Insert the bolt from the back and tighten the nut to at least 45 ft/lbs. Repeat the process on each hole. When complete, install “Caution Label” to the underside of the door (if applicable). Concrete Installation Process Mark the location of the hole to correspond with the small hole of bracket. Drill a 1 ⁄ 2 " hole in the concrete. Replace the fixture and insert wedge anchor and tap until fully seated. Tighten nut to a least 45 ft/lbs. Repeat the process on remaining holes. Affix “Caution Label” on the underside of the door.

EXPERTS IN DOCK & PLANT SAFETY

453