SLV Lighting

3-CIRCUIT TRACK

254

PLANNING AID 3-circuit track

These are plan views as a designer looks down from above. There is a raised polarity ridge on the bottom of the track sections. The red lines indicate the polarity ridge. The polarity must be consistently maintained throughout a track layout. The examples below show the polarity ridge of the track and the connectors used to keep the polarity ridge consistent throughout the layout.

L-Connector - Bent #722250U/51U/54U

L-Connector - Bent #722250U/51U/54U

T Connector 1 # 722270U/71U/74U

L-Connector - Bent #722250U/51U/54U

T-Connector 2 - Bent #772280U/81U/84U

X-Connector 722260U/61U/64U

Feed- In 1 “Left” #722190U/91U/94U

T Connector 1 # 722270U/71U/74U

X-Connector #722260U/61U/64U

T Connector 2 - Bent #722280U/81U/84U

Feed-In 1 “Left” #722190U/91U/94U

L-Connector - Bent #722250U/51U/54U

Feed-In 2 “Right” #722220U/21U/24U

L-Connector #722250U/51U/54U

Feed-In 1 “Left” #722190U/91U/94U

X-Connector #722260U/61U/64U

T-Connector 2 #722280U/81U/84U

T-Connector 1 - Bent #722270U/71U/74U

L-Connector - Bent #722250U/51U/54U

Feed-In 1 “Left” #722190U/91U/94U