SDSC Type D-Die Sets Catalog

Three typical boss and heel block wear plate systems (U, L plate design substantially reduces wear on the die blocks, system utilizes four right angle blocks located on each cor directions and maximum work area inside the blocks and plate intersections. The ‘L’ block can be mounted inside bushings. Ball bearing components or friction type (as sh designs. WEAR PLATE DIE SET Three typically used boss and heel block wear plate systems (U, L, and V) are available from Superior. Proper wear plate design substantially educes wear on the die blocks, punches, and other die compo ents. The L system utilizes four right angle blocks located on each corner of the die set. This allows multiple feed directions and maximum work are inside the blocks and offers the most rigidity considering the 8 wear plate intersections. The 'L' block can be mounted inside or outside the boss that typically contains the bushings. Ball bearing components or friction type (as shown here ) can be used in any of our wear plate designs. block wear plate systems (U, L, and V) are available from Superior. Proper wear duces wear on the die blocks, punches, and other die components. The L le blocks located on each corner of the die set. This allows multiple feed rk area inside the blocks and offers the most rigidity considering the 8 wear lock can be mounted inside or outside the boss that typically contains the onents or friction type (as shown here) can be used in any of our wear plate ated on each corner of the die set. This allows multiple feed e the blocks and offers the most rigidity considering the 8 wear mounted inside or outside the boss that typically contains the iction type (as shown here) can be used in any of our wear plate TE DIE SET - L SYSTEM plate systems (U, L, and V) are available from Superior. Proper wear on the die blocks, punches, and other die components. The L IE SET - L SYSTEM WEAR PLATE DIE SET L-SYSTEM LL

1" R

2 1/2" TYP.

1" R

LW

MIN. 1/8"

MIN. 1/8"

LW

LW

BW

TYP. 1/2" MIN.

IN.

1" TYP.

WEAR PLATE BOSS AND "L" BLOCK

NOTE: Each wear plate is custom fit to ensure mating accuracy. Proper re-installation is required if ever removed. WEAR PLATE BOSS AND "L" BLOCK

MIN. 3/4"

TYP. 1/2" MIN.

IZES

NOTE: Each wear plate is custom fit to ensure mating accuracy. Proper re-installation is required if ever removed.

INGS

BW

1" TYP.

BL

6

* TYPICAL BLOCK AND BOSS SIZES FRICTION BEARING PINS/BUSHINGS NOTE: -Wear plates are available in hardened steel, solid bronze, or self-lubricating types. -Each wear plate is custom fit to ensure mating accuracy. Proper re-installation is required if ever removed. -Bosses over 7" in height are screwed and welded as standard L SYSTEM DIMENSION

NOTE:

IZES

BW

NOM PIN DIA.

4 ¾

LL

LW BL

BW

Wear plates are available in hardened steel, solid bronze, or self-lubricating types.

L - SYSTEM DIMENSIONS

2

aded

1230

TYPICAL BLOCK & BOSS SIZES -FRICTION BEARING PIN/BUSHINGS

TYPICAL BLOCK & BOSS SIZES - BALL BEARING

Nominal Dia.

9

9

LL

LW

BL

BW

LL

6 LW

BL

BW

3

6

Wear plates are available in hardened steel, solid bronze, or self-lubricating types. 1 1/2'' 7 1/2 7 1/2 4

4

8 1/4 8 1/4 8 3/4

8 1/4 8 1/4 8 3/4

4 3/4 4 3/4 5 1/4 5 3/4 6 1/4

4 3/4 4 3/4 5 1/4 5 3/4 6 1/4

1 3/4''

7 3/4 8 1/4

7 3/4 8 1/4

4 1/4 4 3/4 5 1/2

4 1/4 4 3/4 5 1/2

L SYSTEM DIMENSION

2''

1230

* TYPICAL BLOCK AND BOSS SIZES BALL BEARING 9 1/4 9 1/4

2 1/2''

9

9

3''

9 1/2

9 1/2

6

6

9 3/4

9 3/4

NOM PIN DIA.

LL

LW BL

BW

uncontrolled if printed or downloaded

7355

8 ¼ 8 ¼ 8 ¾

8 ¼ 4 ¾ 4 ¾

4 ¾

2