SDSC Type D-Die Sets Catalog
ING HOLES handling, drilled and tapped Handling Holes can be put into the punch holder and die ns are available for use with standard lifting eyebolts. (eyebolt) Holes may be added to die sets by specifying the diameter desired and one of ions shown. The diameter of the Handling Holes must always be specified. rations may be requested. DLING HOLES y safe han ling, drilled and tapped Handling Holes ca be put into the punch holder and die hree options are available for use with standard lifting eyebolts. al Handling (eyebolt) Holes may be added to die sets by specifying the iameter desired and one of ational options shown. The diameter of the Handling Holes must always be specified. er configurations may be requested. OPTION 1 OPTION 2 LING HOLES s fe h n ling, drille n tapped Handling Holes can be pu into the punch holder and die options are avail ble for use with standard lifting eyebolts. ndling (eyebolt) Holes may be added to ie sets by specifying the diamete esired a d one of l options shown. The diameter of the Handling Holes must always be specified. nf gurations may be requested. HANDLING HOLES For easy and safe handling, drilled and tapped Handling Holes can be put into the punch holder and die shoe. Three options are available for use with standard lifting eyebolts. Optional Handling (eyebolt) Holes may be added to die sets by specifying the diameter desired and one of the loc tional options shown. The diameter of the H ndling Holes must always be specified. Any other configurations may b requested. OPTION 1 OPTION 1
OPTION 2
OPTION 2
OPTION 1 LENGTH
OPTION 2 LENGTH
OPTION 1 LENGTH
OPTION 1 LENGTH
OPTION 2 LENGTH
OPTION 2 LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
1/2 DEPTH
1/2 DEPTH
1/2 DEPTH
1/2 DEPTH
1/2 DEPTH
1/2 DEPTH
1/2 LENGTH
J
1/2 LENGTH
J
1/2 LENGTH
J
1/2 DS
1/2 DS
1/2 DS
1/2 DS
1/2 DS
1/2 DS 1/2 LENGTH
J
DS
DS
1/2 LENGTH
J
1/2 LENGTH
J 1/2 DS
1/2 DS
DS
DS
DS
DS
1/2 DS PH
1/2 DS
1/2 DS
1/2 DS PH
DS
DS
DS
DS PH
DS PH
DS
1/2 PH
1/2 PH
1/2 PH
1/2 PH
1/2 PH
1/2 PH
PH
PH
1/2 PH
1/2 PH
PH
PH
PH
PH
1/2 PH DS
1/2 PH
1/2 PH
1/2 PH DS
PH
PH
PH DS
PH
PH
PH DS
OPTION 3 HANDLING HOLES For easy and safe handling, drilled and tapped Handling oles can be put into the punch holder and die shoe. Three options are available for use with standard lifting eyebolts. Optional Handling (eyebolt) Holes may be added to die sets by specifying the diameter desired and one of the locational options shown. The diameter of the Handling Holes must always be specified. Any other configurations may be requested. LENGTH PH DS OPTION 3 LENGTH PH DS OPTION 3 LENGTH PH DS OPTION 3 LENGTH PH DS OPTION 3 LENGTH PH DS OPTION 3 LENGTH PH DS
DEPTH
OPTION1
OPTION2
1/2 PH
1/2 DS
DEPTH
DEPTH
1/2 PH
1/2 DS
1/2 PH
1/2 DS
OPTION1 LENGTH
OPTION2 LENGTH
DEPTH
1/2 PH
1/2 DS
DEPTH
LENGTH
LENGTH
DEPTH
J 1/2 PH
1/2 DS
1/2 PH
1/2 DS
J
J
J
DEPTH
DEPTH
J
J
Holes are centered on length . N 1 . Handling Holes are centered on length pth edg s. dling Holes are c ntered on length dges. OPTION 1: NOTE: 1. Handling Holes are centered on length and depth edges
7340 NOTE: 2. J Dimension equals 3 time guide pin diameter, on die sets over 29 inch length to and including 57 inch length or depth. NOTE: 3. J Dimension equals 1/6 of length, on die sets over 57 inch length or depth. NOTE: 2. J Dimension equals 3 time guide pin diameter, on die sets over 29 inch length to and including 57 inch length or depth. NOTE: 3. J Dimension equals 1/6 of length, on die sets over 57 inch length or depth. PH 1/2 PH OPTION3 PH 1/2 PH LENGTH PH DS PH OPTION3 PH LENGTH PH DS OPTION 2 AND 3 NOTE: 1. J Dimension 4 inches minimum, on die sets up to and including 29 inch length or depth. OPTION 2 AND 3 NOTE: 1. J Dimension 4 inches minimum, on die sets up to and including 29 inch length or depth. DS 1/2 DS 1/2 DEPTH 1/2 LENGTH J DS 1/2 DS DS 1/2 DS 1/2 LENGTH 1/2 PH J DS 1/2 DS 1/2 PH OPTION 2 AND 3 NOTE: 1. J Dimension 4 inches minimum, on die sets up to and including 29 inch length r depth. NOTE: 2. J Dimension equals 3 time guide pin diameter, on die sets over 29 inch length to a d including 57 inch length or depth. NOTE: 3. J Dimension equals 1/6 of length, on die sets over 57 inch length or depth. DEPTH 1/2 DEPTH DEPTH
OPTION 2 AND 3: NOTE: 1. J Dimension 4 inches minimum, on die sets up to and i cluding 29 inch length or depth NOTE: 2. J Dimensions quals 3 times guide pin diameter, on die set over 29 inch length to and including 57 nch length or depth. NOTE: 3. J Dimension equals 1/6 of length, on die sets over 57 inch length or depth.
uncontrolled if printed or downloaded
DEPTH
1/2 PH
1/2 DS
Made with FlippingBook - professional solution for displaying marketing and sales documents online