MyTana Winter 2022

Nozzles Find the nozzle you need for the task at hand. Our selection falls into two broad categories covering work in 1½” to 18” lines: – Drilled orifice nozzles – Nozzles with replaceable inserts

Nozzles with Drilled Orifices Drilled orifice nozzles are inexpensive, but wear quickly especially if not maintained. Keep yours clean with our Tip Cleaners, see page 42.

Button Nose Nozzles A short body and smooth round nose reduces hang ups and are ideal for working in turns, traps and elbows. Knurled sides let you generally hand-tighten. Suitable for general cleaning applications.

Pentrating Thrust Excellent pulling pow- er while penetrating blockages to establish flow in a blocked pipe. Good for general drain

Blind Thrust Clean at a greater distance with maximum pulling power. Good for general drain cleaning.

Cornering Ideal for tight turns and elbows, good flushing action and reasonable pulling power. For general drain clean- ing

Monster Flusher Dual rear angles create a wide area of turbulence keeping sand, gravel and de- bris suspended while cleaning a pipe. Pulls well.

General Flusher Excellent flushing, good pulling power. Effective cleaning of pipe walls after flow has been established in a blocked pipe.

cleaning, good in elbows and tees.

Jets: 6 rear @ 45°

Jets: 1 fwd @ 0° 3 rear @ 25° 3 rear @ 45

Jets: 4 rear @ 25°

Jets: 1 side @ 90° 3 rear @ 45°

Jets: 1 fwd @ 0° 3 rear @ 25°

NPT PSI

GPM PART NO.

PART NO.

PART NO.

PART NO.

PART NO.

$35 $38 $38 $40 $40 $45

$35 $38 $38 $40 $40 $45

$35 $38 $38 $40 $40 $45

$35 $38 $38 $40 $40 $45

$35 $38 $38 $40 $40 $45

1/8” 1,500 2.1 TN3

TN1-B

TN2

TN5

TN1-G

1,500 2.1 MN3-21 3,000 4.5 MN3-45 3,000 4.5 LN3-45 3,000 8 LN3-8

MN1-B 21 MN1-B 45 LN1-B 45

MN2-21 MN2-45 LN2-45

MN6-21 MN6-45 LN6-45

MN1-G 21 MN1-G 45 LN1-G 45

1/4”

3/8”

LN1-B 8

LN2-8

LN6-8

LN1-G 8

1/2” 3,000 12 NZ-3

NZ1-B

NZ-4

NZ-5

NZ1-G

Jetter Leader A blind thrust nozzle attached to a 12" long flexible leader. Guides the nozzle through difficult situations with maximum pulling power. 3/8" or 1/2" NPT

Jets: 4 rear jets @ 25° NPT PSI

GPM PART NO.

$72 $72

3,000 4.5 LN4-45

3/8"

3,000 8

LN4-8

$135

1/2” please call to order

PHONE: ( 866) 837-7972

FAX: ( 651) 222-1739

WEBSITE: MyTana.com

38