Midwest Tech 2016 Product Catalog

Right Angle Ratcheting Screwdriver Lisle Fits where a regular screwdriver can't. Place handle over bit and turn. Reverse handle on bit to tighten. Use also with 1/4" round shaft screwdriver. Ratcheting action with infinite settings.

55 Series Digital Multimeter OTC Multimeter provides all the base functions required for today's automotive testing. •Max. display 2000 counts • Diode check

GENERALTOOLS Automotive 503901

Includes straight slot & #2 Phillips bit assemblies. Stk. Mfr.

• Auto/manual range • Continuity buzzer

•Auto power off

Price

•Data hold, max hold DC volts 200mV to 200V. AC volts 2V to 200V. DC current 200/2000μA. AC current 200/2000μA. Resistance 400 Ω to 2M Ω Temperature -58°F to 392°F Includes test leads & temperature probe. Stk. Mfr. Price 693398 3910 $65.30

$17.10

64250

Nut SplittingTool General High-grade, heat-treated steel tool for removing frozen, hard-to-remove rusted nuts. Angled body gets into tight spots. Splits nuts up to 1/2" automotive series. Stk. Mfr. Length Price 417955 175 4-3/4" $31.20

550 Series Digital Multimeter OTC Features powerful automotive test functions such as; frequency, duty cycle, diode & continuity tests, plus all the standard meter features you expect in a professional grade multimeter. • Diode Test •Continuity Test • Auto Range Data •Hold Relative • Change Auto •Power Off Frequency: 1Hz ~ 10MHz ± 0.1%

Throttle Pedal Depressor

Lisle Holds throttle at constant rpm. Simply engage the nylon hook under the steering wheel and extend the depressor rod to the accelerator pedal. Adjustment screw fine tunes the rpm level. 40"L. Stk. Mfr. Price 503744 48700 $34.10

Duty Cycle: 0.1% ~ 99.9% ± 2.5% DC Volts: 400mV/4/40/400V ± 0.5%, 1000V ± 0.8% AC Volts: 4/40/400V ± 0.8%, 400mV/750V ± 1.2%

Terminal Tool Lisle Eliminate damaged wires and terminals. Removes wires from terminals without damage to either. Prongs depress the "barbs" on conven- tional terminals.

DC Amps: 400/4000μA ± 2%, 40/400mA ± 1.5%, 4/10A ± 2% AC Amps: 400/4000μA ± 2.5%, 40/400mA ± 2%, 4/10A ± 2.5% Resistance: 400 Ω /4/40/400k Ω ± 1%, 4/40M Ω ± 2% Capacitance: 40nF ± 3.5%, 400nF/4μF/40μF ± 3%, 400μF/4000μF ± 20% Includes test leads. Stk. Mfr. Price 693399 3940 $142.00

Stk.

Mfr.

Price

$13.70

503889

56500

TESTING EQUIPMENT & SUPPLIES Heavy-duty Remote Starter Switch OTC Allows 1 person to start and crank en- gine while under the hood or from either side of the vehicle. Convenient hot circuit indicator, red ready light glows when starter switch is connected to a hot circuit (light goes off when switch is depressed) . • High current push-button switch offers reliable operation & long life • Heavy-duty, 12 ga. wire leads (5'L) are oil & grease resistant • Easy hook-up, high current clips w/protective boots open 5/8"W Stk. Mfr. Price

100 Series Autoranging Multimeter OTC High-quality unit features all of the same classic autoranging multimeter functions, plus automotive test-specific measurements. • Auto/manual ranging • O2 cross counts

• Duty cycle & frequency to 10M Hz • Auto power off can be disabled • Data hold freezes data w/push of a button • Tests for resistance, continuity, diode & capacitance • Measures for rpm, temperature (°F/°C) , dwell, fused direct currents up to 10 amps through meter • Millisecond pulse width & peak volts measurements for fuel injectors • Relative measurement removes test lead resistance from low-resistance measurements • Data recording min/max for fluctuating measurements DC volts 400mV to 400V. AC volts 4V to 400V. DC current 40/400μA. AC current 40/400μA. Resistance 400 Ω to 400k Ω . Capacitance 40nF/4μF. Temperature -50°F to +400°F. RPM 0/10,000. Includes inductive rpm clamp, heavy-duty test leads w/removable alligator clip ends & temperature probe. Stk. Mfr. Price 693402 3505A $225.00

$47.40

693420

3650

Remote Starter Lisle Tough, smooth-working reliable switch. Features heavy gauge, rubber-covered copper wire. Depress button to jog or start the engine.

Stk.

Mfr.

Price

$18.60

503817

20750

500

www.midwesttechnology.com | Phone 800.831.5904 | Fax 800.285.7054