Meltric Full-Line Catalog

Lever Mechanism

Self-Ejecting Plug For self-ejecting plugs, a lever mechanism is added to the assembly and attached to the power cable via a tension cord. When tension is applied to the power cable, the tension cord rotates the lever mechanism, which in turn lifts the standard pawl on the receptacle and releases the plug before damage can occur.

Tension Cord

Cable Glide (443)

Fixed part to be installed directly on an angle or a wall box

Mobile part

Available on:

DSN20, DSN30, DSN60 DS20, DS30, DS60, DS100C DSN12c, DSN24c, DSN37c, DS7c, DR7c

Step 1: A tension cord is attached to the power cable and the lever mechanism of the plug. Self-ejection system at rest.

How To Order: To the male inlet, add suffix -338

TENSION

To the female receptacle, add suffix -352 To the handle part number, add suffix 443

Example: To order a DSN30 self-ejecting plug, receptacle and poly handle (3/4” NPT), the part numbers would be: Inlet: 63-38043 -338 Receptacle (straight Insertion): 63-34043 -352 Handle: 512P0N07 443 Notes: Self-ejecting devices are modified to allow straight insertion. This defeats the safety shutter and voids the device’s switch-rating.

Step 2: The tension acts on the power cable and the cord. The lever mechanism gradually raises the receptacle pawl.

TENSION

EJECTION

Step 3: The receptacle pawl is fully raised by the lever mechanism, causing the automatic ejection of the plug.

Self-Ejecting Plug (DS100, DSN150, DS200, DN20c only)

Available on:

For self-ejecting plugs on DS100, DSN150, DS200 and DN20c models, a cam mechanism is used in lieu of the ‘lever mechanism.’ The principle of operation remains the same.

DSN150 DS100, DS200 DN20c

How To Order: * To the male inlet, add suffix -338

To the female receptacle, add suffix -352 To the handle part number, add suffix 443

Tension Cord

Example: To order a poly DS100 self-ejecting plug, receptacle and poly handle (3/4” NPT), the part numbers would be:

Cam mechanism

Cable Glide (443)

Inlet: 33-98043 -338 Receptacle (straight Insertion): 33-94043 -352 Handle: 515P0N07 443

* For DS200 ordering, use suffixes listed in DS200 section * For DN20c ordering, use suffixes listed in DN20c section Notes: Self-ejecting devices are modified to allow straight insertion. This defeats the safety shutter and voids the device’s switch-rating.

Fixed part to be installed directly on an angle or a wall box

Mobile part

24 4

OPTIONS