Meltric Full-Line Catalog

PRODUCT FEATURES

Operating Instructions

Locking Pawl Class I Division 2 and Class I Zone 2 hazardous location ratings are based on using the pawl to lock devices in the mated position so that all sources of power to the device can be turned off before the device can be disconnected.

DS100C Poly shown

1

Before connection, ensure that the circuit is deenergized. Align the red dots, push the plug partially in, then turn clockwise slightly to line up the latch with the catch.

Spring-Loaded Butt-Style Contacts

Ensures optimal contact force and superior electrical performance.

Silver-Nickel Contacts Silver-nickel contact material provides superior conductivity, durability and corrosion resistance.

Lid When closed, the lid maintains Type 4X protection for the receptacle after removal of the plug.

2

Push the plug fully home until it is held in place by the latch. The circuit is now closed.

General Ratings

Amperage

20 to 250 A

Highlighted Feature Typical Device Labels

Voltage

600 VAC

Frequency

60 Hz

Horsepower

2 to 100 hp

1002001 Meltric DS60 60 A, 480VAC 20hp, TYPE 4X 36-64043 RECEPTACLE/CONNECTOR Class I, Division 2, Groups ABCD, T6 Class I, Zone 2, IIC

Environmental

Type 4X

Temperature

min -40°F/max 104°F

3

Hazardous Location Listings

Listing Requirement: Tighten screw to lock the plug in the mated position.

CSA Class I Division 2 Gr A,B,C,D, T6 Class I Zone 2, IIC

DS and DSN plugs and receptacles are CSA horsepower rated for motor connections in hazardous locations. Not to be operated while energized.

Plug & Receptacles Listings (CSA)

4

Category

CSA

Optional: Insert a 5/16” lock or locking pin to prevent disconnection or to lock the receptacle lid closed.

HAZARDOUS LOCATION

Plugs and Receptacles

C22.2 No. 182.1-07

Electrical Equipment for Class I, Div 2 Locations

C22.2 No. 213-M1987

192