Klein Tools Catalog 167

CONDUIT TOOLS

Pliers

BX and Armored Cable Cutter • Cuts armored cable up to 3/8" (0.95 cm) diameter: BX, AC, MC, MCAP ® and Greenfield • Depth of cut adjusts between standard MC and reduced diameter MC to prevent cable nicks • Sharp cutting blade eliminates burrs • Comes with one blade stored in handle for convenience • Holds up to six replacement blades in handle (Cat. No. 53726SEN) Overall Length 53725 Armored cable up to 3/8" (0.95 cm) diameter: BX, AC, MC, MCAP ® and Greenfield 7.25" (18.4 cm) Cat. No. Cutting Capacity

Strippers, Cutters, and Crimpers

53726-SEN REPLACEMENT BLADE

IMPROVED BLADE PROFILE

53725

Wrenches

Drivers and

MCAP ® is a registered trademark of Southwire Company.

Electrician's Conduit Scoring Tool • Durable zinc cast scoring tool eliminates spiraling • Used for scoring 1/2", 3/4" and 1" (1.3 cm, 1.9 cm, and 2.5 cm) EMT conduit

• Klein-designed, patented scoring wheel scores and allows clean conduit snaps without leaving burrs inside • 1" (2.5 cm) scoring wheel conveniently located in base of the handle; no tools required to replace scoring wheels • Four roller tracks specifically designed for professional use • US Patent D638451

Conduit Tools

and Measurement

88906

REPLACEMENT BLADES

Tool Kits

Cat. No.

Cutting Capacity

Overall Length

1/2" and 3/4" 88907

1" 88908

88906

Scores 1/2", 3/4", 1" (1.3 cm, 1.9 cm and 2.5 cm) EMT Conduit

6" (15.2 cm)

Conduit Locknut Wrench • Easily attach locknuts in tight or deep cut-in boxes • For 1/2" and 3/4" (1.3 cm and 1.9 cm) connectors • Direct-drive heads rotate each other when twisted • Heavy-duty steel construction enables needed torque to loosen or tighten connectors • Perfect for remodel work where box is filled with existing wires • US Patent pending Cat. No. Size Weight Overall Length 56999 1/2", 3/4" (1.3 cm, 1.9 cm) 11.2 oz (318 g) 9" (22.9 cm) Conduit Locknut and Reaming Pliers • Tightens 1/2" (1.3 cm) and 3/4" (1.9 cm) EMT or 1/2" (1.3 cm) rigid locknuts • Fits liquid tight fittings and caps • Reams and deburrs both inside and outside of conduit

Safety, PPE

and Comfort

56999

Jobsite

Accessories

Tool Storage Voice/Data/Video

• Knurled jaws at nose tip pull wire or fish tape • Machined nose fits snugly into locknut wings

D333-8

Cat. No.

Jaw Length

Jaw Width

Jaw Thickness Point Diameter

Handle Color

Handle Finish Plastic-Dipped

Overall Length 7.75" (19.7 cm)

D333-8

1.625" (4.1 cm)

0.938" (2.4 cm) 0.5" (1.3 cm)

0.19" x 0.36" (0.48 cm x 0.91 cm)

Yellow

Locknut Wrench Set • Patent pending design features opposing offset bends for easy access to difficult to reach locknuts • Three wrenches included for most commonly used conduit sizes, 1/2" (1.27 cm), 3/4" (1.91 cm) and 1" (2.54 cm)

Test and

Measurement

• Two internal magnets on each wrench hold the set together for easy storage • The slim alloyed steel design allows for access when space is limited • Each wrench is a different color and marked to easily identify size • Hooked tip latches on locknut for ultimate turn leverage • Steel design is corrosive resistant and durable

50900R

Power Tools

and Accessories

Cat. No. Description

Number of Pieces Overall Length Overall Width Overall Height

50900R Locknut Wrench Set

3

6.46" (16.41 cm)

1.9" (4.8 cm)

1.78" (4.52 cm)

100

www.kleintools.com > 800-553-4676

and Structural

Lifting, Pulling,