Klein Tools Catalog 166

Pliers

CONDUIT TOOLS

Strippers, Cutters,

Lineman’s Pliers – Fish Tape Pulling Includes core High-Leverage Side-Cutting features plus: • Easily pulls 1/8" or 1/4" (0.3 or 0.6 cm) flat steel fish tape without damaging the tape • Crimps non-insulated connectors, lugs, and terminals (Cat. No. J2000-9NECRTP)

and Crimpers

D213-9NETP

Drivers and

Wrenches

HANDLE FINISH

Cat. No.

Jaw Length

Jaw Width

Jaw Thickness Knife Length Handle Color Handle Finish

Overall Length 9.33" (23.70 cm)

D213-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm)

0.797" (2.02 cm) Dark Blue

Plastic-Dipped

J213-9NETP

1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm)

0.781" (1.98 cm) Dark Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)

Pliers with heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire D2000-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.781" (1.98 cm) Light Blue Plastic-Dipped

9.33" (23.70 cm)

Conduit Tools and Measurement

J2000-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) J2000-9NECRTP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm)

0.781" (1.98 cm) Light Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm) 0.797" (2.02 cm) Light Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)

JOURNEYMAN™ Dual-Material

Plastic-Dipped

Conduit-Fitting and Reaming Screwdriver • Hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use • Reams both the inside and outside of the conduit at the same time • 5/16" (0.8 cm) screwdriver tip with 2-1/2" (6 cm) long shank • Longer Cushion-Grip handle provides comfort and more torque for reaming • Replaceable reaming blade is held in place with a 1/6" (.15 cm) set screw

Tool Kits

85191

19353 CONDUIT REAMER REPLACEMENT BLADE, 2-PACK

Cat. No.

Conduit Size

Overall Length 7.5" (19.1 cm)

85191

1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm)

and Comfort

Safety, PPE

Conduit Reamer • Locks onto screwdrivers to ream and smooth thin-wall conduit • Reams ID and OD at the same time • Two set-screws for round- and square-shank screwdrivers • Fits up to 3/8" (1 cm) keystone-tip screwdrivers • NOT for use on power tools

19353 CONDUIT REAMER REPLACEMENT BLADE, 2-PACK

Jobsite Accessories

19352

Cat. No.

Conduit Size

Overall Length 6.75" (17.2 cm)

19352

1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm)

Tool Storage Voice/Data/Video

Power Conduit Reamer • Ream conduit and install fittings in a fraction of the time • Impact rated to fit into power drill chucks and quick release adapters • Replacement blades are available and the only approved blade for use in this tool • Replacement bits are available but any standard 1/4" (1 cm) hex bit will work

4 x Stronger

Precision engineered replaceable reaming blade

1/4" hex quick connect

Bit Retention

85091

19353 CONDUIT REAMER REPLACEMENT BLADE, 2-PACK

NOTE: Read and follow safety instructions in power tool owner’s manual.

Cat. No.

Conduit Size

Overall Length 5.75" (14.6 cm)

85091

1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm)

Test and Measurement

Knockout Punch Set • Optimized design reduces wrench effort • Slugs are split inside for easy removal • Maximum capacity of 10 gauge mild steel. Also cuts aluminum, fiberglass and plastic • Punches holes cleanly and accurately • Set includes 1/2" or 3/4" (1.3 cm or 1.9 cm) punch and die with draw stud

Power Tools and Accessories

53728SEN

53727SEN

Cat. No. 53727SEN 53728SEN

Conduit Sizes 3/4" (1.9 cm) 1/2" (1.3 cm)

Overall Length

4" (10.2 cm)

2.625" (6.7 cm)

NOTE: Lubricate threads before each use.

Lifting, Pulling,

and Structural

95

www.kleintools.com > 800-553-4676

Made with FlippingBook Ebook Creator