Klein Tools Catalog 165

Pliers Strippers, Cutters,

and Crimpers

TESTERS Wrenches Drivers and

ELECTRICAL

Electronic Voltage Testers • ET40 is an Electronic Voltage Tester for checking or troubleshooting common residential electrical wiring and devices such as outlets, light fixtures, doorbells, batteries, etc. It tests at 4 useful levels for both AC (12V to 240V AC) and DC (1.5V to 24V), can identify and distinguish between AC or DC voltage, and indicates polarity when measuring DC voltages. Using 2 x AAA batteries (included), it will power off automatically after approximately 2 minutes of non-use, and has a low battery indicator. This CATIII 250V, Class 2, Double Insulation safety rated tester has built-in test lead holders on sides of the tester. • ET45 is an Electronic Voltage Tester for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells, etc. It tests at four useful levels for both AC (24V to 240V AC) and DC (32V to 330V). Batteries are not required; tester is powered by the applied voltage. Built-in test leads are held in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage. Built to withstand a 9.8' (3 m) drop, this tester has a CATIII 350V, Class 2, Double Insulation safety rating. • ET60 is a solid-state, low impedance, Electronic Voltage Tester that measures AC/DC voltages up to 600V. It does NOT require batteries - it is powered by the applied voltage. This tough meter design is water and dust resistant, and withstands a 9.8' (3 m) drop. • ET250 Digital AC/DC Voltage and Continuity Tester is a solid-state, digital voltage and continuity tester that measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 also tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. This tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions. It automatically selects the measurement mode, and auto-powers on when a voltage/continuity measurement is attempted. This tough meter design is water and dust resistant, and withstands a 9.8' (3 m) drop.

Conduit Tools and Measurement

Safety, PPE and Comfort and Structural Tool Kits Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling,

ET45VP

ET60

ET40

ET45

ET250

Cat. No. Batteries

Voltage

Standard

Overall Length

Overall Width 1.11" (28.0 mm) 1.05" (27.0 mm) 2.84" (72.2 mm) 2.31" (58.8 mm)

ET40 ET45 ET60

2 x AAA

AC Level Indicators: 12V, 24V, 120V, 240V; and DC indicators: 1.5V, 9V, 12V, >17-24V AC Level Indicators: 24V, 48V, 120V, 240V; DC Level indicators: 32V, 64V, 160V, 330V

CAT III 250V, CE, UKCA 5.24" (133.0 mm) CAT III 350V, CE, UKCA 4.45" (113.0 mm)

Not Required Not Required

12 to 600 V AC/DC 2 to 600V AC/DC

CAT IV 600V

5.67" (144.1 mm)

ET250

3 x AAA

CAT IV 600V, CE, UKCA 6.06" (154.0 mm)

Tester Kit Cat. No. Description

Included

ET45VP AC/DC Voltage and Receptacle Electrical Test Kit

ET45 Electronic Voltage Tester, RT210 Receptacle Tester

263

www.kleintools.com > 800-553-4676