Klein Tools Catalog 165

Introducing Over 250 New Products!

Pliers Strippers, Cutters, and Crimpers

Wrenches

Drivers and

Heavy-Duty Wire Stripper/Cutter pg. 31

Multi-Bit Precision Screwdrivers pg. 72

Hand Tools

Ironworker's Pliers with Comfort Grip pg. 16

Impact Flip Socket Drivers pg. 79

20 Foot Glow Fish Tape pg. 110

Conduit Tools

and Measurement

and Comfort and Structural Tool Kits Accessories Tool Storage Voice/Data/Video Measurement and Accessories

Jobsite Electrical Testing & Installation Tools Construction & Structural Tools Battery-Operated Impact Tools pg. 276 Thermal Imager pg. 271 Karbn™ Full Brim Hard Hats pg. 153

1000V Insulated Screwdrivers and Kits pgs. 68, 145

Safety, PPE

Respirators and Reusable Face Masks pg. 159

Safety Lamp with Magnet pg. 157

Cooling Fan for Hard Hats and Safety Helmets pg. 158

Jobsite

Impact Punchdown Tool pg. 236

Cable and Wire Management Solutions pgs. 240-241

Clamp Meters pg. 255-257

LAN Scout™ Jr. 2 Cable Tester pg. 247

Test and

Power Tools

90° Impact Wrench pg. 278

Wide Range Distribution Grip pg. 305

Cordless Utility LED Light pg. 281

Lifting, Pulling,

Pliers Strippers, Cutters,

/RRN IRU WKLV V\PERO

and Crimpers

WR Ȩ QG .OHLQ V QHZ LQQRYDWLYH WRROV IRU WKH MRE

Drivers and

Wrenches

Conduit Tools and Measurement

Conduit Benders with Angle Setter™ pg. 118

Electrician’s Hammers pg. 102

Rechargeable Self-Leveling Green Planar Laser Level pg. 126

Utility Staple Starter with Staples pg. 104

Magnetic Wire Puller pg. 115

Safety, PPE and Comfort and Structural Tool Kits Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling,

Gel Knee Pads pg. 169

Modular Tool Pouch System pg. 201

60W Portable Solar Panel pg. 183

Rechargeable Flashlights pgs. 172-173 Headlamps pgs. 157, 175-177

Bluetooth ® * Jobsite Speaker pg. 181 Powerbox 1 pg. 184

Scout TM Pro 3 Tester with PoE pg. 248-249

GFCI Receptical Tester pg. 265

Non-Contact Voltage Testers pg. 264

Jobsite Accessories, PPE, Safety Helmets and Visors Portable Power Stations 500/1500W pgs. 182-183

Bluetooth ® * Earbuds pg. 180

*Bluetooth is a registered trademark of Bluetooth Special Interest Group (SIG).

Pliers Strippers, Cutters, and Crimpers

Wrenches

Drivers and

Conduit Tools

and Measurement

and Comfort and Structural Tool Kits Accessories Tool Storage Voice/Data/Video Measurement and Accessories

Safety, PPE

JOBSITE 7$%/( 2) &217(176

HAND TOOLS 3OLHUV ........................... 09 Lineman ............................................ 12-15 Ironworker ...............................................16 Diagonal ................................................. 21 Long-Nose ...................................... 22-26 Slip-Joint Pliers ................................... 26 Pump ....................................................... 27 Specialty ................................................. 28 Plier Handles ......................................... 28 6WULSSHUV &XWWHUV & &ULPSHUV ................ 29 Wire Stripping/Cutting ............... 30-35 Crimping ......................................... 36-37 Cable Cutting/Stripping ............. 38-43 Bolt Cutting ......................................... 44 Sheet Metal (HVAC) .................... 45-47 Duct ....................................................... 48 Knives .............................................. 49-57 Scissors ......................................... 58-60 Hand Saws ..................................... 61-62

'ULYHUV :UHQFKHV ... 63 Screwdrivers .................................. 65-77 Multi-Bit Screwdrivers & Bits ... 70-75 Impact & Torque Drivers .................... 78 Nut Drivers ..................................... 79-83 Tap Tool & Awls ................................... 84 Wrenches ........................................ 85-95 Hex Keys ...................................... 96-100 Hammers ................................... 101-103 Utility Stapler .................................... 104 Chisels & Punches .................. 105-106 &RQGXLW 3LSH 0HDVXUHPHQW ....... 107 Fish Tapes ................................. 108-111 Fish Rods ................................... 112-114 Wire Pulling .............................. 115-116 Conduit ....................................... 117-118 Pipe ............................................. 119-123 Levels ......................................... 124-129 Tape Measures ......................... 130-131 Distance Measuring ......................... 132 7RRO .LWV ..................... 133

,QVXODWHG 7RROV 33( 6DIHW\ .......... 139 1000V Insulated Tools ........... 140-149 Hard Hats .................................. 151-153 Safety Helmets .................................. 154 Hard Hat Accessories ............. 155-158 Eyewear/Respiration ............... . 158-159 Work Wear ................................ 160-161 Gloves ......................................... 162-166 Supports .............................................. 167 Safety Products ................................. 168 -REVLWH $FFHVVRULHV ... 169 Illumination ................................ 170-178 Coolers ................................................ 179 Magnetic Wristband ......................... 180 Wireless Jobsite Speakers ..... 180-181 Phone Holders ................................... 181 Batteries & Power ................... 182-184

Jobsite

7RRO 6WRUDJH ............ 185 Pouches ...................................... 187-193 Tool Holders .............................. 194-196 Tool Belts/Suspenders ........... 196-206 Backpacks ................................ 208-210 Tool Bags ................................... 211-218 Zipper Bags ............................... 219-221 Storage Racks ......................... 222-223 Lineman/Utility Buckets, Bags, & Accessories .............. 224-230

Test and

Power Tools

Lifting, Pulling,

Pliers Strippers, Cutters,

and Crimpers

Drivers and

Wrenches

Conduit Tools and Measurement

Safety, PPE and Comfort and Structural Tool Kits Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling,

:$55$17< ......006 ,1'(; .....................321

ELECTRICAL TESTING & INSTALLATION TOOLS 9RLFH 'DWD 9LGHR .................................................... 231 Cable Preparation ............................................................................................................. 232 Cable Termination ................................................................................................... 232-235 Punchdown Tools ..................................................................................................... 236-237 Cable Connectors .................................................................................................... 238-239 Cable Management .................................................................................................. 239-241 VDV Kits .................................................................................................................... 242-245 Cable Testing ........................................................................................................... 246-252 7HVW 0HDVXUHPHQW ............................................... 253 Clamp Meter ............................................................................................................. 254-257 Multimeter ................................................................................................................ 258-260 Meter Accessories ................................................................................................... 261-262 Electrical Testers ..................................................................................................... 263-267 Thermometers ......................................................................................................... 268-269 Borescopes ......................................................................................................................... 270 Specialty Testers ..................................................................................................... 271-273 Meter & Tester Cases ...................................................................................................... 274 High Voltage ...................................................................................................................... 274

CONSTRUCTION & STRUCTURAL TOOLS

3RZHU 7RROV $FFHVVRULHV ........................................ 275 Battery-Operated Impact Drills .................................................................................. 276-277 Battery-Operated Impact Wrenches .................................................................................. 278 Battery-Operated Cutters/Crimpers ......................................................................... 279-281 Battery-Operated Lighting ................................................................................................... 281 Holemaking .................................................................................................................... 282-283 Blades ........................................................................................................................................ 283 Drill Bits .......................................................................................................................... 284-288 /LIWLQJ 3XOOLQJ 6WUXFWXUDO .................................... 289 Wire Pulling Grips ........................................................................................................ 290-306 Wire Mesh Grips ............................................................................................................ 307-311 Hooks and Rope ...................................................................................................................... 313 Block and Tackle ............................................................................................................ 314-316 Steel & Concrete Construction .................................................................................. 317-320

Pliers Strippers, Cutters, and Crimpers

K lein Tools was founded in 1857 by an industrious i German immigrant, Mathias Klein, who began in the hand tool business when a broken side cutting pliers was brought to his forge shop COMPANY HISTORY

Wrenches

Drivers and

Conduit Tools

and Measurement

and Comfort and Structural Tool Kits Accessories Tool Storage Voice/Data/Video Measurement and Accessories

by a telegraph lineman. Mathias repaired the pliers by forging and finishing a new half for the tool and riveting it to the old half. Soon the lineman returned because the other original half of the pliers had broken and needed replacement. Mathias forged and finished the second half of the pliers and riveted it to the other replacement half – creating the first complete Klein pliers. f r To this day, Klein Tools is proudly owned and managed by the Klein family. For 165 years of hard work and dedication earned Klein the reputation of supplying only the finest quality products for users of professional hand tools, test and measurement and occupational protective equipment. Klein Tools continues to expand domestically and internationally to provide quality products to professionals all over the world.

Safety, PPE

Jobsite

Elk Grove Village, IL

Corporate HQ Lincolnshire, IL

Starnberg, Germany

General Machine Products Trevose, PA

Super Rod Wales, UK

Ergodyne St. Paul, MN

CBS Products Oakham, UK

Klein Cutlery Bolivar, NY

Paris, France

Manufacturing, HQ Mansfield, TX

Fort Smith, AR

Seoul, South Korea

Klein Tools de Mexico Monterrey, MX

Miami, FL

Hong Kong, China

Mexico City, MX

Test and

Bogota, Columbia

Klein Tools New Zealand, Christchurch

Power Tools

Klein Tools Australia, Adelaide

Civitella San Paulo, Brazil

Klein Tools Manufacturing/Distribution

Klein Tools Sales Office

Klein Tools Subsidiary

Lifting, Pulling,

Company History

onal

Pliers Strippers, Cutters,

tting Pliers ting features plus:

COMMITTED TO AMERICAN MANUFACTURING FOR 165 YEARS DIELECTRIC TESTING 10,000 volts are run through the insulation to ensure that there are no leaks J2000-59 Cutting Knives Handle Color Handle Finish Standard Blue/Black Journeyman D2000-49

and Crimpers

SULATED

Drivers and

Wrenches

with ASTM F-1505 and IEC 60900 standards for insulated tools official international 1000-volt rating symbol. and Nut Drivers • Wire Strippers/Cutters pers/Cutters • Knives ach insulated tool is put through Klein’s internal rigorous testing andle any situation in the field. Some of these tests include the st, an impact test and a flammability test, to confirm the durability ols. s or plastic handles provide protection against electrical shock. arked with the official international 1000-volt rating symbol, as t the tool will make contact with an energized source. Jaw Length Jaw Width Jaw Thickness 1.25" (31.8 mm) 1.203" (30.6 mm) 5/8" (15.9 mm) utting Pliers ting feat res plus:

Conduit Tools and Measurement

Safety, PPE and Comfort and Structural Tool Kits Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling,

HANDLE FINISH

Klein Tools has remained dedicated to professional tradesmen worldwide, with a commitment to manufacturing the world’s finest hand tools right here in America. These days, it can be hard to find companies that make products you can count on. But that’s exactly what you’ll get from Klein Tools. We don’t just make great products, we make great products that stand up to the demands of the professionals who use them everyday. Because our standards are as high as yours, we demand that every one of our hand tools delivers all the performance, durability and precision that you need to get the job done right. And by using only the highest quality materials, s superior workmanship, and keeping our manufacturing as close to home as we can, we’re able to uphold those rigorous standards. Klein isn’t just the name of our company, it’s also our family name, so we have to be proud of everything we make. And since we’re an American company that’s been family-owned and family-run, since 1857, you know you can count on us to be here tomorrow. FLAMMABILITY TESTING Classic Insulated (INS) Feature large, bright orange handles making the tool comfortable to use all day and easy to identify in the field. Durable, two component molded insulation provides Insulated Screwdrivers & Nut Drivers Feature insulated, bright orange shaft with Cushion-Grip handles for safety and comfort. Durable, two component molded insulation provides Jaw Width Jaw Thickness Cutting Knives Handle Color Handle Finish 1.188" (30.2 mm) 13/16" (20.6 mm) Semi-Flush Red Plastic-Dipped 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Red Plastic-Dipped 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Orange 2-Layer Insulated 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Glow in the Dark Plastic-Dipped 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Red/Black Journeyman Standard Orange/Gray 3-Layer Insulated 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Blue Plastic Dipped 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Orange 2-Layer Insulated 1.25" (31.8 mm) 13/16" (20.6 mm) Standard Yellow Plastic Dipped 1.188" (30.2 mm) 13/16" (20.6 mm) Standard Light Blue/Black Journeyman Plastic-Dipped JOURNEYMAN™ Dual-Material EINS INSULATED 3-Layer Protection INS INSULATED 2-Layer Protection GLOW-IN-THE-DARK Plastic-Dipped Just pick up a Klein tool and you’ll know what all the professionals know… when you buy a Klein, it'll never let you down. That’s why we’re the #1 choice of professional electricians in the U.S.

Jaw Length

0.813" (20.7 mm) 0.813" (20.7 mm) 0.813" (20.7 mm) 0.813" (20.7 mm) 0.813" (20.7 mm)

esigned To Cut ACSR, Screws, Nails and Most Hardened Wire 0.813" (20.7 mm) 1.188" (30.2 mm) 13/16" (20.6 mm)

0.813" (20.7 mm) 0.813" (20.7 mm) 0.813" (20.7 mm) 0.813" (20.7 mm)

protection against electric shock Thick, exceptionally tough, high dielectric white inner coating is bonded to the tool Flame retardant, impact-resistant, bright orange outer coating

protection against electric shock Thick, exceptionally tough, high dielectric white inner coating is bonded to the tool Flame retardant, impact-resistant, bright orange outer coating

utting Pliers ting features plus:

SPLIT TETHER RING D248-9STT

D248-9STT

EINS suffix contain these stood.

WARNING: Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

5 ith the official international any chance that the tools Jaw Length 0.813" (20.7 mm) 5

Jaw Width

Jaw Thickness 13/16" (20.6 mm)

Fort Smith, AR Cutting Knives

Handle Color

Handle Finish

Bolivar, NY WARNING: Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source. Standard Red Plastic Dipped Standa d Red Pla tic Dipped Mans eld, TX WARNING: Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

Mans eld, TX 1.188" (30.2 mm)

1" (25.4 mm)

www.kleintools.com www.kleintools.com 1.25" (31.8 mm)

Elk Grove Village, IL 1" (25.4 mm)

Trevose, PA

ways inspect your tools before use. Do not use if orange stroy tool if white layer shows through orange layer.

19

WARRANTY

Pliers Strippers, Cutters, and Crimpers

LIMITED WARRANTY

COMMERCIAL AND INDUSTRIAL PRODUCTS WARRANTY

Klein Tools, Inc. warrants that the products set forth below will be free from defects in material and workmanship, under normal use for the time frames listed below (unless otherwise noted on the product packaging). At its option, Klein Tools will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty. This warranty does not apply to damage from alterations, abuse, misuse, lack of maintenance, or normal wear and tear of the product. Proof of purchase from an Authorized Klein Tools Distributor is required for all warranty claims. This warranty does not apply to batteries. $OO LPSOLHG ZDUUDQWLHV LQFOXGLQJ ZLWKRXW OLPLWDWLRQ LPSOLHG ZDUUDQWLHV RI PHUFKDQWDELOLW\ DQG LPSOLHG ZDUUDQWLHV RI ȨWQHVV IRU D SDUWLFXODU SXUSRVH DUH OLPLWHG LQ GXUDWLRQ WR WKH DSSOLFDEOH ZDUUDQW\ SHULRG OLVWHG EHORZ Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. ,Q QR HYHQW VKDOO .OHLQ 7RROV EH OLDEOH IRU LQFLGHQWDO RU FRQVHTXHQWLDO GDPDJHV Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 7KLV ZDUUDQW\ JLYHV VSHFLȦF OHJDO ULJKWV DQG \RX PD\ DOVR KDYH RWKHU ULJKWV ZKLFK YDU\ IURP state to state. THE NORMAL LIFE OF THE PRODUCT +DQG 7RROV This warranty explicitly does not cover climbing tool belts. See Klein Commercial and Industrial products warranty. )LVK 7DSHV )LVK 5RGV 7DSH 0HDVXUHV /HYHOV )ROGLQJ 5XOHV This warranty explicitly does NOT cover cut or deliberately damaged tape, rust or corrosion or foreign material, cracked or broken cases, or bent hooks or bent/missing eyelets. )ODVKOLJKWV DQG ,OOXPLQDWLRQ This warranty explicitly does not cover products containing rechargeable batteries. TWO YEARS FROM THE DATE OF PURCHASE (OHFWULFDO 7HVW DQG 0HDVXUHPHQW 7RROV This warranty explicitly does not cover High Voltage Test and Measurement Tools. See Klein Commercial and Industrial products warranty. Repair service is available for the ET510 Borescope. ONE YEAR FROM THE DATE OF PURCHASE 3URGXFWV &RQWDLQLQJ 5HFKDUJHDEOH %DWWHULHV (including but not limited to Flashlights, Illumination Products, Fans, Audible Entertainment, and Borescopes) PRODUCTS WARRANTED TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP WHEN DELIVERED TO THE CUSTOMER &RQVXPDEOHV (including but not limited to Triple-Taps, Drill Bits, Step Drills, Carbide Hole Cutters, Hole saws and Arbors, Saw Blades and Jab Saws, disposable Razor and Knife Blades, Stripper Cartridges, Gloves, Shoe Covers, Replaceable Cutting Inserts, Wire Marker Books, Bits and Blades, Voice/Data/Video Connectors, Hand Cleaners, and Wire Pulling Lubricants) This warranty explicitly does not cover Specialty Consumables. See Klein Commercial and Industrial products warranty. :$55$17< 5(78516 All warranty returns require proof of purchase from an Authorized Klein Tools Distributor and must include a Warranty Return Authorization (WRA) number. To obtain the WRA and service under this warranty, visit www.kleintools.com/content/warranty or contact your Authorized Klein Tools Distributor. This warranty explicitly does not cover Specialty Hand Tools. See Klein Commercial and Industrial products warranty. 7RRO 3RXFKHV 7RRO %DJV 7RRO %HOWV 6XVSHQGHUV &RROHUV 6RIW 6WRUDJH .QHH 3DGV

Klein Tools, Inc. warrants that the products set forth below, which are manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for the periods of time set forth below (unless otherwise noted on the product packaging). THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. At its option, Klein will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty under normal use and service. This warranty does not apply to damage from alterations, abuse, misuse, lack of maintenance, or normal wear and tear of the product. Proof of purchase from an Authorized Klein Tools Distributor is required for all warranty claims. ,Q QR HYHQW VKDOO .OHLQ EH OLDEOH IRU LQFLGHQWDO RU FRQVHTXHQWLDO GDPDJH THE NORMAL LIFE OF THE PRODUCT 6SHFLDOW\ +DQG 7RROV (including but not limited to insulated tools, steel and concrete construction tools, mining and heavy industry tools, two-handed bolt cutters and cable cutters, torque tools, snips, trimmers, shears, telecom tools, box wrenches, specialty wrenches, rebar hickeys, cable benders) 2FFXSDWLRQDO 3URWHFWLYH (TXLSPHQW (including but not limited to Climbing Belts, Linemen’s Body Belts, Climbers, Climber Pads, *DȥV +DUQHVVHV 3RVLWLRQLQJ 6WUDSV /DQ\DUGV /LQHPDQ %XFNHWV %ORFN DQG 7DFNOH /LQHPDQ %DFNSDFNV $HULDO $SURQV 7LH :LUH 5HHOV :LUH 3XOOLQJ *ULSV (including but not limited to ratcheting cable cutters, ratcheting bolt cutters) Repair service is available for most out of warranty ratcheting hand tools. 3HUVRQDO 3URWHFWLYH (TXLSPHQW DQG 6DIHW\ 3URGXFWV (including but not limited to Safety Glasses, Hard Caps, Hard Hats, Accessories) &RUGOHVV 3RZHU 7RRO $FFHVVRULHV (including but not limited to batteries, chargers) PRODUCTS WARRANTED TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP WHEN DELIVERED TO THE CUSTOMER 6SHFLDOW\ &RQVXPDEOHV LQFOXGLQJ EXW QRW OLPLWHG WR VKLS DXJHUV NQRFNRXW SXQFKHV JULS LQVHUW ȦOHV GULIW SLQV EXOO pins, punches, cold chisels, wedges) BATTERY OPERATED TOOLS: HEAVY DUTY HYDRAULIC CRIMPERS, GEAR DRIVEN CABLE CUTTERS, AND IMPACT WRENCH )LYH \HDUV IURP WKH GDWH RI SXUFKDVH ȃ +\GUDXOLFV 7KUHH \HDUV IURP GDWH RI SXUFKDVH ȃ 0RWRU +RXVLQJ DQG (OHFWURQLFV 2QH \HDU IURP GDWH RI SXUFKDVH ȃ 0RYLQJ 3DUWV LQFOXGLQJ LQWHUFKDQJHDEOH KHDGV DQG MDZV H[FOXGLQJ VSHFLDOW\ FRQVXPDEOHV DeWALT battery packs and chargers are covered by DeWALT’s warranty policy. Visit www. dewalt.com or call 1-800-4-DeWALT (1-800-433-9258) for more details. :$55$17< 5(78516 All warranty returns must include a Warranty Return Authorization (WRA) number. To obtain the WRA and service under this warranty please visit www.kleintools.com/warranty or contact your Authorized Klein Tools Distributor. TWO YEARS FROM THE DATE OF PURCHASE +LJK 9ROWDJH (OHFWULFDO 7HVW DQG 0HDVXUHPHQW (including but not limited to HVNCVT-1, HVNCVT-2, HVCT-1) This warranty does not apply to batteries. ONE YEAR FROM THE DATE OF PURCHASE 5DWFKHWLQJ +DQG 7RROV

Wrenches

Drivers and

Conduit Tools

and Measurement

6 and Structural Tool Kits and Comfort Accessories Tool Storage Voice/Data/Video Measurement and Accessories

Safety, PPE

Jobsite

Test and

Power Tools

www.kleintools.com > 800-553-4676

Lifting, Pulling,

WARNINGS

Pliers Strippers, Cutters,

and Crimpers

Warning Symbols

The following warning symbols are utilized on Klein Tools products and throughout this book to inform of the level and nature of the hazard associated with our products. As a general warning, you should always inspect your tools before each use. Keep tool clean, dry and free of surface contaminants.

Drivers and

Wrenches

:DUQLQJ 6\PERO

5LVN RI ([SORVLRQ

Conduit Tools and Measurement

:HDU (\H 3URWHFWLRQ

6WURQJ 0DJQHWLF )LHOG

'R 1RW 8VH 2Q 2U 1HDU /LYH (OHFWULFDO &LUFXLWV

5LVN 2I 6KRFN

Safety, PPE and Comfort and Structural Tool Kits Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling,

)RU 8VH RQ %DUH /LYH &RQGXFWRU &ODPS 0HWHU

:HDU +DQG 3URWHFWLRQ

5HDG ,QVWUXFWLRQV %HIRUH 8VH

/DVHU :DUQLQJ

'R 1RW 8VH WR 3U\

1RW 3HUVRQDO 3URWHFWLYH (TXLSPHQW

'R 1RW 8VH 7R &KLVHO

'R 1RW 3UREH 0RYLQJ 3DUWV

1R 6WHS

3LQFK 3RLQW +D]DUG

'R 1RW ([WHQG +DQGOH /HQJWK

'R 1RW 6WULNH +DPPHU )DFHV 7RJHWKHU

'R 1RW 3XVK 2U +DPPHU

5LVN RI 'URZQLQJ

9 5DWHG

'RXEOH ,QVXODWHG

8VH 6DIH :RUN 3RVLWLRQ

1RW )RU )DOO $UUHVW

WARNING: Cancer and reproductive harm – See www.P65Warnings.ca.gov for more information.

7

www.kleintools.com > 800-553-4676

PROPER USE GUIDE

Pliers Strippers, Cutters, and Crimpers

Important information for everyone who uses hand tools...fully illustrated pages of basic facts and practical how-to tips.

Wrenches

Drivers and

Conduit Tools

and Measurement

8 and Structural Tool Kits and Comfort Accessories Tool Storage Voice/Data/Video Measurement and Accessories

Safety, PPE

Jobsite

Prepared by KLEIN TOOLS in conjunction with the Hand Tools Institute. Available from your Klein distributor (Cat. No. 98016) .

Test and

Specifications of all products in this catalog are subject to change without notice. Dimensions shown for all forged products in this catalog are as precisely accurate as possible, but subject to very slight variations that are unavoidable in forging and grinding operations. Dimensions of Klein forged tools and all other tools and equipment are always within commercial tolerances recognized for such products.

Power Tools

www.kleintools.com > 800-553-4676

Lifting, Pulling,

Pliers Strippers, Cutters,

and Crimpers

Drivers and

Wrenches

Conduit Tools and Measurement

Safety, PPE and Comfort and Structural Tool Kits Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling,

PLIERS Klein specializes in the making of the world’s finest pliers...pliers that professionals have trusted for more than 160 years. Klein pliers feel right and work right. They are job-matched for every kind of work you do; designed and built with exceptional quality standards in a tradition that dates back to 1857.

Lineman Diagonal Long Nose Slip-Joint Pump Specialty

3OLHUV

3OLHUV 6WULSSHUV &XWWHUV DQG &ULPSHUV

PLIERS CUTTING EDGES Knife-edge descriptions refer to the angle of the outside cutting edges of the knives when fully closed.

KLEIN QUALITY Klein pliers are made of the finest U.S. steel alloy. Forged, precision machined, hardened, and carefully tempered for maximum strength, Klein pliers provide exceptional performance and durability. All pliers mating surfaces and dimensions are precision machined and hot riveted for uniformly smooth opening and closing action. Cutting knives are manufactured for long-lasting edges and are designed to perfectly align and meet according to the way each is used. Side-cutting and long-nose pliers with side cutters have knives that meet at the hinge first and then meet at least one-half of the knife length. Diagonal-cutting pliers meet at the tip first and then meet at least one-half of the knife length. These precise knife-closing designs increase knife life and facilitate resharpening. Klein pliers are individually adjusted to meet performance standards far exceeding application requirements – ensuring that nothing less than outstanding quality ever carries the Klein name. USING PLIERS A professional knows all the rules about using pliers, but a review of the following points may help you recall any you may have forgotten. 1. Never use pliers to do another tool’s job. Pliers should not be used as a hammer or pry tool or a wrench. Using pliers instead of the proper tools risks damaging the work, injuring yourself, and losing time. 2. Never push pliers beyond their capacity. Bending stiff wire with light pliers or the tip of needle-nose pliers can spring or break them. Use a stronger, blunt-nose pliers. When you need greater leverage, use pliers with greater leverage. Don’t extend the length of the pliers handles. Bolts should be cut with a bolt cutter, and large cable with a cable cutter. 3. Never expose pliers to excessive heat. Direct flame on metal can ruin the tool. Cutting pliers are especially vulnerable to high, direct heat as it may change the material properties of the tool. 4. Never cut hardened wire with ordinary pliers. Pliers should not be used for cutting hardened wire unless they are specifically recommended for this use. 5. Never rock pliers from side to side when cutting wire…and never bend the wire back and forth against the cutting knives. Either practice can dull or nick the cutting edges. Cut wire at a right angle only. If it won’t cut readily, the knives may need sharpening, or you may need pliers with greater leverage. 6. Never cut any wire or metal unless your eyes are protected. Goggles or other protective devices are an absolute must. Don’t take shortcuts. Operate safely... the professional way. 7. Never cut any wire or metal unless your fellow workers’ eyes are also protected. The wire that doesn’t get you may get someone else. Think about the “other guy" as well as yourself. 8. Never depend on plastic-dipped handles to insulate you from electricity. Plastic-dipped and Journeyman TM handles are intended for comfort and a firmer grip only. They are not intended for protection against electric shock. Never use any pliers or cutting tools on live electrical circuits. Only use insulated tools that are marked with the official international 1000-volt rating symbol if there is any chance that the tool will make contact with an energized source. PLIERS CATALOG NUMBER PREFIXES/SUFFIXES “D" (Prefix) – Indicates the pliers have plastic-dipped handles for comfort, NOT for protection against electrical shock. “HD" (Prefix) – Indicates the pliers have heavy-duty plastic-dipped handles to provide an extra level of user comfort, NOT for protection against electrical shock. “J" (Prefix) – Indicates the pliers have state-of-the-art dual material molded Journeyman™ handles for a softer, more comfortable grip on the outer surface and a harder, more durable grip on the inner surface and handle ends, NOT for protection against electrical shock. “C" (Suffix) – Indicates the pliers have a coil spring in the handles for self-opening action.

Standard Cutting Edges Cuts hard wire. Found on all Klein side-cutters, long-nose, and on most diagonal-cutting pliers.

:UHQFKHV

Semi-Flush Cutting Edges Closely cuts medium wire. Found on select diagonal cutting pliers.

'ULYHUV DQG

Full-Flush Cutting Edges Close, flat cutting of soft wire only. Found on select diagonal-cutting pliers.

&RQGXLW 7RROV

DQG 0HDVXUHPHQW

10 DQG &RPIRUW DQG 6WUXFWXUDO 7RRO .LWV $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR 0HDVXUHPHQW DQG $FFHVVRULHV

PLIERS DIMENSIONS All Klein pliers are listed with necessary dimensions in both inches and centimeters.

The following drawings of six basic types of pliers are keyed by letter to the dimensions given for each pliers listed. All dimensions are subject to commercial tolerances.

A – Overall Length B – Jaw Length C – Jaw Width

D – Jaw Thickness E – Knife Length F – Point Thickness

6DIHW\ 33(

Side-Cutting Pliers

Diagonal-Cutting Pliers

1.

2.

-REVLWH

D

D

C

C

B E

A

B

A

End Cutting Pliers

Long-Nose Pliers

4.

3.

D

E D

F

C

C

B E

A

B

A

Flat-Nose and Duck-Bill Pliers

Curved-Nose Pliers

6.

5.

7HVW DQG

D

D

F

C

F

E

C

B

A

B

A

3RZHU 7RROV

Pliers dimensions shown are accurate within accepted commercial tolerances, which allow slight variations that normally result from forging and grinding operations.

www.kleintools.com > 800-553-4676

/LIWLQJ 3XOOLQJ

GET A HANDLE ON IT!

3OLHUV 6WULSSHUV &XWWHUV

DQG &ULPSHUV

'ULYHUV DQG

:UHQFKHV

&RQGXLW 7RROV DQG 0HDVXUHPHQW

6DIHW\ 33( DQG &RPIRUW DQG 6WUXFWXUDO 7RRO .LWV -REVLWH $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR 7HVW DQG 0HDVXUHPHQW 3RZHU 7RROV DQG $FFHVVRULHV /LIWLQJ 3XOOLQJ

Klein Tools offers a variety of handle types to suit your everyday jobsite needs.

Plain

Plastic-Dipped Provides additional comfort and ease of identification compared to plain handles Glow-In-The-Dark Plastic-Dipped Handles easily locate your tool in dark or low lit areas Heavy Plastic-Dipped Handles are more comfortable and easier to grab with gloved hands

JOURNEYMAN ™ Dual-Material 6WDWH RI WKH DUW GXDO PDWHULDO PROGLQJ SURFHVV Innovative dual material grips are more comfortable and last longer than other handles &RQWRXUHG WKXPE DUHD for additional comfort and positive feel +DUG EODFN PDWHULDO for toughness and durability 6RIW PDWHULDO RQ RXWHU VXUIDFH for comfort and a firm grip

,168/$7('

Klein’s insulated handles combine excellent functionality along with the reduced risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts PXOWL FRORU RXWHU FRDWLQJ 7KLFN H[FHSWLRQDOO\ WRXJK KLJK GLHOHFWULF ZKLWH LQQHU FRDWLQJ LV ERQGHG WR WKH WRRO ,QWHJUDO JXDUGV help prevent hand contact with conductive parts )ODPH UHWDUGDQW LPSDFW UHVLVWDQW

See the Jobsite > Insulated Tools, PPE and Safety section

US Patent: D468988

LINEMAN’S 3OLHUV 6WULSSHUV &XWWHUV DQG &ULPSHUV 'ULYHUV DQG :UHQFKHV &RQGXLW 7RROV DQG 0HDVXUHPHQW 6DIHW\ 33( DQG &RPIRUW -REVLWH $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR

0HDVXUHPHQW DQG 6WUXFWXUDO 7RRO .LWV

7HVW DQG

3RZHU 7RROV

DQG $FFHVVRULHV

/LIWLQJ 3XOOLQJ

3OLHUV 6WULSSHUV &XWWHUV

High-Leverage Lineman’s Pliers

Unique handle tempering helps absorb the "snap" when cutting wire

DQG &ULPSHUV

Hot-riveted joint ensures smooth action and no handle wobble

Rivet is closer to cutting edge

'ULYHUV DQG

:UHQFKHV

Induction hardened cutting knives for long life

cutting and gripping power than other pliers designs

&RQGXLW 7RROV DQG 0HDVXUHPHQW

Sure-gripping cross-hatched knurled jaws

)25*(' 67((/ from Klein's US-made proprietary blend

6DIHW\ 33( DQG &RPIRUW DQG 6WUXFWXUDO 7RRO .LWV -REVLWH $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR 7HVW DQG 0HDVXUHPHQW 3RZHU 7RROV DQG $FFHVVRULHV /LIWLQJ 3XOOLQJ

Precision-hardened plier head for on-the-job toughness

High-Leverage Lineman's Pliers Includes core High-Leverage Side-Cutting features plus: • Combination polished and black-oxide finish • New England nose (Cat. No. J20008 has New England Tapered nose; Cat. No. D213-9 has Square nose) • Glow-in-the-Dark grips are easily spotted in dark or low lit areas (Cat. No. D2000-9NEGLW)

D213-9NE

HANDLE FINISH

GLOW-IN-THE-DARK Plastic-Dipped

JOURNEYMAN™ Dual-Material

INS INSULATED 2-Layer Protection

EINS INSULATED 3-Layer Protection

Plain

Plastic-Dipped

Heavy, Plastic-Dipped

SPLIT TETHER RING D213-9NETT

Cat. No. 213-9NE

Jaw Length

Jaw Width

Jaw Thickness 0.62" (1.57 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.613" (1.56 cm) 0.613" (1.56 cm) 0.613" (1.56 cm) 0.613" (1.56 cm) 0.613" (1.56 cm) 0.613" (1.56 cm) 0.53" (1.35 cm) 0.6" (1.52 cm) 0.6" (1.52 cm) 0.6" (1.52 cm) 0.6" (1.52 cm) 0.6" (1.52 cm) 0.6" (1.52 cm) 0.613" (1.56 cm)

Knife Length 0.781" (1.98 cm) 0.75" (1.91 cm) 0.781" (1.98 cm) 0.781" (1.98 cm) 0.719" (1.83 cm) 0.797" (2.02 cm) 0.797" (2.02 cm) 0.797" (2.02 cm) 0.797" (2.02 cm) 0.719" (1.83 cm) 0.797" (2.02 cm) 0.75" (1.91 cm) 0.719" (1.83 cm) 0.781" (1.98 cm) 0.781" (1.98 cm) 0.781" (1.98 cm) 0.797" (2.02 cm) 0.719" (1.83 cm) 0.797" (2.02 cm)

Handle Color

Handle Finish

Overall Length 9.27" (23.5 cm) 8.82" (22.40 cm) 9.53" (24.21 cm) 9.35" (23.75 cm) 8.59" (21.82 cm) 9.33" (23.70 cm) 9.68" (24.59 cm) 9.68" (24.59 cm) 9.34" (23.72 cm) 8.89" (22.58 cm) 9.55" (24.26 cm) 9.53" (24.21 cm) 7.77" (19.74 cm) 8.59" (21.82 cm) 9.33" (23.70 cm) 9.68" (24.59 cm) 9.33" (23.70 cm) 9.34" (23.72 cm) 8.76" (22.25 cm) 9.55" (24.26 cm)

1.594" (4.05 cm) 1.438" (3.65 cm) 1.594" (4.05 cm) 1.6" (4.06 cm) 1.438" (3.65 cm) 1.594" (4.05 cm) 1.594" (4.05 cm) 1.594" (4.05 cm) 1.594" (4.05 cm) 1.441" (3.66 cm) 1.594" (4.05 cm) 1.284" (3.26 cm) 1.44" (3.66 cm) 1.594" (4.05 cm) 1.594" (4.05 cm) 1.594" (4.05 cm) 1.441" (3.66 cm) 1.594" (4.05 cm)

1.25" (3.18 cm) 1.22" (3.10 cm) 1.66" (4.22 cm) 1.26" (3.20 cm) 1.21" (3.07 cm) 1.25" (3.18 cm) 1.25" (3.18 cm) 1.25" (3.18 cm) 1.25" (3.18 cm) 1.209" (3.07 cm) 1.25" (3.18 cm) 1.03" (2.62 cm) 1.109" (2.82 cm) 1.25" (3.18 cm) 1.25" (3.18 cm) 1.25" (3.18cm) 1.25" (3.18 cm) 1.11" (2.82 cm) 1.25" (3.18 cm)

Black

Plain

2138NEEINS 2139NEEINS

Orange/Gray Orange/Gray

3-Layer Insulated 3-Layer Insulation

D213-9

Dark Blue Dark Blue Dark Blue

Plastic-Dipped Plastic-Dipped Plastic-Dipped

D213-8NE D213-9NE

D213-9NE-INS D213-9NETT

Orange

2-Layer Insulation

Dark Blue Light Red

Plastic-Dipped

HD213-9NE

Heavy Plastic-Dipped

J2138NE J213-9NE

Dark Blue/Black Dark Blue/Black

Journeyman™ Dual-Material Journeyman™ Dual-Material

With heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire 20009NEEINS 1.594" (4.05 cm) 1.25" (3.18 cm) 0.613" (1.56 cm) 0.797" (2.02 cm)

Orange/Gray

3-Layer Insulation

D2000-7 D2000-8

Light Blue Light Blue Light Blue

Plastic-Dipped Plastic-Dipped Plastic-Dipped

D2000-9NE

D2000-9NE-INS

Orange

2-Layer Insulation

D2000-9NEGLW 1.594" (4.05 cm)

Glow-in-the-Dark

Plastic-Dipped

HD2000-9NE

Light Red

Heavy Plastic-Dipped

J20008

Light Blue/Black Light Blue/Black

Journeyman™ Dual-Material Journeyman™ Dual-Material

J2000-9NE

13

www.kleintools.com > 800-553-4676

/LQHPDQȆV 3OLHUV

3OLHUV 6WULSSHUV &XWWHUV DQG &ULPSHUV

Lineman’s Pliers – Fish Tape Pulling Includes core High-Leverage Side-Cutting features plus: • Easily pulls 1/8" or 1/4" (3 or 6 mm) flat steel fish tape without damaging the tape • Crimps non-insulated connectors, lugs, and terminals (Cat. No. J2000-9NECRTP)

D213-9NETP

:UHQFKHV

'ULYHUV DQG

HANDLE FINISH

Cat. No.

Jaw Length

Jaw Width

Jaw Thickness Knife Length Handle Color Handle Finish

Overall Length 9.33" (23.70 cm)

D213-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm)

0.797" (2.02 cm) Dark Blue

Plastic-Dipped

J213-9NETP

1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm)

0.797" (2.02 cm) Dark Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)

Pliers with heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire D2000-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.781" (1.98 cm) Light Blue Plastic-Dipped

9.33" (23.70 cm)

J2000-9NETP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) J2000-9NECRTP 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm)

0.781" (1.98 cm) Light Blue/Black Journeyman™ Dual-Material 9.55" (24.26 cm)

JOURNEYMAN™ Dual-Material

Plastic-Dipped

0.797" (2.02 cm) Blue/Black

Journeyman™ Dual-Material 9.55" (24.26 cm)

&RQGXLW 7RROV

DQG 0HDVXUHPHQW

Lineman’s Pliers – Bolt-Thread Holding

14 DQG &RPIRUW DQG 6WUXFWXUDO 7RRO .LWV $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR 0HDVXUHPHQW DQG $FFHVVRULHV

HANDLE FINISH

Includes core High-Leverage Side-Cutting features plus: • Hinge opening holds and cleans 5/8" pole line and hardware bolts or threaded rods

D213-9NETH

Plastic-Dipped

Heavy, Plastic-Dipped

6DIHW\ 33(

Cat. No.

Jaw Length

Jaw Width

Jaw Thickness 0.625" (1.59 cm) 0.625" (1.59 cm)

Knife Length 0.797" (2.02 cm) 0.781" (1.98 cm)

Handle Color

Handle Finish Plastic-Dipped

Overall Length 9.33" (23.70 cm) 9.34" (23.72 cm)

D213-9NETH HD213-9NETH

1.594" (4.05 cm) 1.594" (4.05 cm)

1.25" (3.18 cm) 1.25" (3.18 cm)

Dark Blue Light Red

Heavy Plastic-Dipped

With heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire D2000-9NETH 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.781" (1.98 cm)

-REVLWH

Light Blue

Plastic-Dipped

9.34" (23.72 cm)

Lineman’s Pliers – Connector Crimping Includes core High-Leverage Side-Cutting features plus: • Crimps non-insulated connectors, lugs and terminals • Cleanly strips 10-12 AWG solid wire and 12-14 AWG stranded wire (Cat. No. J2139NECRN )

D213-9NECR

HANDLE FINISH

WIRE STRIPPING HEAD J213-9NECRN

JOURNEYMAN™ Dual-Material

INS INSULATED 2-Layer Protection

Plastic-Dipped

7HVW DQG

Cat. No.

Jaw Length

Jaw Width

Jaw Thickness 0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm)

Knife Length 0.797" (2.02 cm) 0.797" (2.02 cm) 0.797" (2.02 cm) 0.797" (2.02 cm)

Handle Color

Handle Finish Plastic-Dipped 2-Layer Insulation

Overall Length 9.33" (23.70 cm) 9.68" (24.59 cm) 9.55" (24.26 cm) 9.55" (24.26 cm)

D213-9NE-CR

1.594" (4.05 cm)

1.25" (3.18 cm) 1.25" (3.18 cm) 1.25" (3.18 cm) 1.25" (3.18 cm)

Yellow Orange

D213-9NE-CR-INS 1.594" (4.05 cm)

J213-9NECR J2139NECRN

1.594" (4.05 cm) 1.594" (4.05 cm)

Yellow/Black Yellow/Black

Journeyman™ Dual-Material Journeyman™ Dual-Material

3RZHU 7RROV

With heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire D2000-9NECR 1.594" (4.05 cm) 1.25" (3.18 cm) 0.625" (1.59 cm) 0.797" (2.02 cm)

Light Blue

Plastic-Dipped

9.34" (23.72 cm) 9.55" (24.26 cm)

J2000-9NECR

1.594" (4.05 cm)

1.25" (3.18 cm)

0.625" (1.59 cm)

0.797" (2.02 cm)

Light Blue/Black

Journeyman™ Dual-Material

www.kleintools.com > 800-553-4676

/LIWLQJ 3XOOLQJ

3OLHUV 6WULSSHUV &XWWHUV

/LQHPDQȆV DQG 0XOWLIXQFWLRQ 3OLHUV

Standard Lineman’s Pliers • Streamlined design with sure-gripping, cross-hatched knurled jaws • Induction hardened cutting knives for long life • Hot-riveted joint ensures smooth action and no handle wobble • Unique handle tempering helps absorb the ‘’snap’’ when cutting wire • Precision-hardened plier head for on-the-job toughness • “Handform’’ handles for full gripping and cutting power • Custom, US-made tool steel forged for durability

DQG &ULPSHUV

'ULYHUV DQG

:UHQFKHV

D201-7NE

Cat. No. D201-7NE D201-8NE

Jaw Length

Jaw Width

Jaw Thickness 0.5" (1.27 cm) 0.625" (1.59 cm)

Knife Length 0.625" (1.59 cm) 0.75" (1.91 cm)

Handle Color

Handle Finish Plastic-Dipped Plastic-Dipped

Overall Length 7.38" (18.75 cm) 8.59" (21.82 cm)

&RQGXLW 7RROV DQG 0HDVXUHPHQW

1.281" (3.25 cm) 1.281" (3.25 cm)

1.062" (2.70 cm) 1.19" (3.02 cm)

Dark Blue Dark Blue

Hybrid Pliers with Crimper • Strips 10-14 AWG solid and 12-16 AWG stranded wire with 6-32 and 8-32 bolt shearing • High-leverage design for more cutting power • Wide knurled head easily grabs and twists wires • Dual-material Journeyman grips are more comfortable and last longer than other handles • Crimps non-insulated connectors, lugs and terminals • Cat. No. J215-9CRTP quickly and easily pulls 1/8" or 1/4" (3 or 6 mm) flat steel fish tape without damaging the tape

6DIHW\ 33( DQG &RPIRUW DQG 6WUXFWXUDO 7RRO .LWV -REVLWH $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR 7HVW DQG 0HDVXUHPHQW 3RZHU 7RROV DQG $FFHVVRULHV /LIWLQJ 3XOOLQJ

Strips

Cuts

Twists

Shears

Crimps

Tape Pulling

Strips and Cuts (AWG)

Cat. No. J215-8CR

Solid Stranded Screw Shearing Jaw Length Jaw Width

Jaw Thickness Knife Length Handle Color Handle Finish

Overall Length

10-14

12-16 12-16

6-32, 8-32 6-32, 8-32

2.04" (5.18 cm) 1.083" (2.75 cm) 0.5" (1.27 cm) 0.73" (1.85 cm) Gray/Black 2.04" (5.18 cm) 1.154" (2.93 cm) 0.6" (1.52 cm) 0.8" (2.03 cm) Gray/Black

Journeyman™ Dual-Material 8.235" (20.92 cm) Journeyman™ Dual-Material 8.981" (22.81 cm)

J215-9CRTP 10-14

High-Leverage Combination Pliers • High-leverage design. Rivet is closer to the cutting edge for 40% greater cutting and gripping power than other pliers designs • Crimps non-insulated connectors, lugs and terminals • Toothed pipe-grip for greater gripping power

12098

HANDLE FINISH

JOURNEYMAN™ Dual-Material

Plastic-Dipped

INS INSULATED 2-Layer Protection

EINS INSULATED 3-Layer Protection

Cat. No.

Jaw Length

Jaw Width

Jaw Thickness 0.55" (1.40 cm) 0.55" (1.40 cm) 0.55" (1.40 cm) 0.55" (1.40 cm)

Knife Length 0.711" (1.81 cm) 0.711" (1.81 cm) 0.711" (1.81 cm) 0.711" (1.81 cm)

Handle Color

Handle Finish Plastic-Dipped 3-Layer Insulation 2-Layer Insulation

Overall Length 8.61" (21.87 cm) 8.71" (22.12 cm) 8.76" (22.25 cm) 8.78" (22.30 cm)

12098

1.78" (4.52 cm) 1.78" (4.52 cm) 1.78" (4.52 cm) 1.78" (4.52 cm)

1.02" (2.59 cm) 1.02" (2.59 cm) 1.02" (2.59 cm) 1.02" (2.59 cm)

Dark Blue

12098EINS 12098-INS

Orange/Gray

Orange

J12098

Dark Blue/Black

Journeyman™ Dual-Material

15

www.kleintools.com > 800-553-4676

3OLHUV 6WULSSHUV &XWWHUV DQG &ULPSHUV

PLIERS

:UHQFKHV

'ULYHUV DQG

IRONWORKER’S

Ironworker’s Side-Cutting Pliers • Twists and cuts soft annealed rebar tie wire • High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other pliers designs (Cat. Nos. 213-9ST, D213-9ST and D20009ST) • Square-nose design • Spring-loaded action for self-opening • Hook bend handle • D201-7CSTLFT features hook bend in left handle for lefties • Heavy-duty knurled jaws (Cat. Nos. D201-7CSTA, D201-7CSTLFT, D213-9STT, 213-9ST, D213-9ST and D2000-9ST)

&RQGXLW 7RROV

DQG 0HDVXUHPHQW

16 DQG &RPIRUW DQG 6WUXFWXUDO 7RRO .LWV $FFHVVRULHV 7RRO 6WRUDJH 9RLFH 'DWD 9LGHR 0HDVXUHPHQW DQG $FFHVVRULHV

D201-7CSTA

HANDLE FINISH

6DIHW\ 33(

D201-7CSTLFT

DEEPER CHANNELS ON KNURL FOR STRONGER GRIP

SPLIT TETHER RING D201-7CSTT D213-9STT

D201-7CSTA M201-7CSTA

Plain

Plastic-Dipped

-REVLWH

Cat. No. 201-7CST 213-9ST D201-7CST D201-7CSTA D201-7CSTT D213-9ST D213-9STT

Jaw Length

Jaw Width

Jaw Thickness 0.5" (1.27 cm) 0.625" (1.59 cm) 0.5" (1.27 cm) 0.5" (1.27 cm) 0.5" (1.27 cm) 0.5" (1.27 cm) 0.625" (1.59 cm) 0.625" (1.59 cm)

Knife Length 0.625" (1.59 cm) 0.781" (1.98 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm) 0.781" (1.98 cm) 0.781" (1.98 cm)

Handle Color

Handle Finish

Overall Length 9.13" (23.19 cm) 9.29" (23.60 cm) 9.19" (23.34 cm) 9.19" (23.34 cm) 9.19" (23.34 cm)

1.269" (3.22 cm) 1.594" (4.05 cm) 1.269" (3.22 cm) 1.269" (3.22 cm) 1.281" (3.25 cm) 1.269" (3.22 cm) 1.594" (4.05 cm) 1.594" (4.05 cm)

1.156" (2.94 cm) 1.24" (3.15 cm) 1.156" (2.94 cm) 1.156" (2.94 cm) 1.156" (2.94 cm) 1.25" (3.18 cm) 1.24" (3.15 cm) 1.24" (3.15 cm)

Black Black

Plain Plain

Blue Blue Red Blue Blue Blue

Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped

D201-7CSTLFT

9" (22.86 cm)

9.35" (23.75 cm) 9.375" (23.81 cm)

With heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire D2000-7CST 1.281" (3.25 cm) 1.156" (2.94 cm) 0.5" (1.27 cm) 0.611" (1.55 cm)

Blue Blue

Plastic-Dipped Plastic-Dipped

9.19" (23.34 cm) 9.35" (23.75 cm)

D2000-9ST

1.594" (4.05 cm)

1.44" (3.66 cm)

0.625" (1.59 cm)

0.781" (1.98 cm)

Ironworker’s Pliers with Comfort Grips and Kit • All the features of Klein’s Slim-Head Ironworker’s Pliers • Soft, cushioned grip for repeated hardwire cutting • Extended ribs help maintain control by minimizing hand travel up the handle • Grip extends beyond plier handle to provide air pocket for increased user comfort • Textured grip for improved dexterity and quick grip placement • Comfort Grip Kit (Cat. No. M200ST) will retrofit the straight handle of Klein’s Slim-Head Ironworker’s Pliers (Cat. No. 201-7CST)

7HVW DQG

3RZHU 7RROV

Cat. No.

Jaw Length Jaw Width Jaw Thickness Knife Length Handle Color Handle Finish Overall Length

M201-7CSTA

M201-7CSTA 1.28" (3.25 cm) 1.16" (2.95 cm) 0.5" (1.27 cm)

0.63" (1.60 cm) Black — Black

Comfort Grip Comfort Grip

10.38" (26.37 cm) 6.74" (17.12 cm)

M200ST

—

—

—

www.kleintools.com > 800-553-4676

/LIWLQJ 3XOOLQJ