Keystone Electronics Catalog K75 2025

SMT PRINTED CIRCUIT BOARD JUMPERS

AVAILABLE ON TAPE AND REEL

• All conductive polystyrene carrier meets ANSI/EIA-481 standard • Low profile/space saving design

• Minimal PCB footprint

• Designed to link circuit board traces in applications where thru hole jumpers are not possible

MATERIAL: .020 (.51) Copper, Silver Plate Power Rating: 0.5 Watts at 158ºF (70ºC), with a current of 20 Amps and a connection temperature at 221ºF (105ºC or less) Operating Temperature: -50°F to 185°F (-45°C to 85°C)

COMPACT

MICRO-MINIATURE

MINIATURE

.091 [2.30] (2) PLS

.050 [1.27] (2) PLS

.079 [2.00] TYP.

.100 [2.54] (2) PLS

.100 [2.54]

.071 [1.80] TYP.

.079 [2.00]

.079 [2.00]

.039 [1.00]

.217 [5.50]

.071 [1.80]

.100 [2.54]

.270 [6.85]

.484 [12.30]

.270 [6.86]

Mounting Detail

Mounting Detail

Mounting Detail

.310 [7.85]

.523 [13.30]

.300 [7.62]

.118 [3.00]

.118 [3.00]

.110 [2.80]

.020 [0.50] MIN.

.075 [1.91]

.020 [0.50] MIN.

.075 [1.90] MIN.

.114 [2.90]

.318 [8.10]

CAT. NO. 5104TR - 2500 pieces per reel CAT. NO. 5104

CAT. NO. 5102TR - 500 pieces per reel CAT. NO. 5102

CAT. NO. 5100TR - 500 pieces per reel CAT. NO. 5100

HIGH CURRENT “TRUE” ZERO OHM SMT JUMPERS

“True” Zero ohm high current SMT Jumpers, designed to replace Zero ohm resistors without changing board designs or layouts. These new devices are uniquely suited as true zero ohm resistor replacements.

MATERIAL: Copper, Silver Plate Power Rating: 0.5 Watts at 158ºF (70ºC), with a current of 20 Amps and a connection temperature at 221ºF (105ºC or less) Operating Temperature: -50°F to 185°F (-45°C to 85°C)

Tape & Reel Spec’s: 12mm Wide, 4mm Pitch, 1,000 pieces per 7" reel meets ANSI/EIA-481 standards

SUPPLIED ON TAPE AND REEL

0603 JUMPER

0402 JUMPER

0805 JUMPER

1206 JUMPER

.040 [1.00]

.067 [1.70]

.033 [0.85]

.049 [1.24]

.020 [0.50]

.061 [1.55]

.079 [2.01]

.120 [3.05]

.020 [0.50]

.028 [0.71]

.028 [0.71]

.028 [0.71]

.010 [0.25] (2) PLS

.015 [0.38] (2) PLS

.015 [0.38] (2) PLS

.015 [0.38] (2) PLS

SMT & THM JUMPERS CAT. NO. 5112 CAT. NO. 5110

CAT. NO. 5108

CAT. NO. 5106

THM JUMPERS

• Unique wave leg design retains jumper in thru hole for wave soldering • May be used as a test point location

• Shorting Pin may be used in applications that require precise location of the legs • May also be used with micro-jacks (see pages 108-109)

Operating Temperature: -50°F to 185°F (-45°C to 85°C)

.100 SPACING

.200 SPACING

.200-.500 SPACING

SHOWN AS INSTALLED INTO TWO .040 [1.02] DIA. MOUNTING HOLE

SHOWN AS INSTALLED INTO TWO .040 [1.02] DIA MOUNTING HOLE

.300 [7.6] REF.

.200 [5.1] REF.

.261 [6.6]

.040 [1.02] DIA.

' A '

.100 [2.54]

CAT. NO. 1430-1 1430-2 1430-3 1430-4 1430-5

A Dim.

.200 [5.08]

.200(5.1) .250(6.4) .300(7.6) .400(10.2) .500(12.7)

Mounting Detail

Mounting Detail

MATERIAL: .020 (.50) Dia. Phospher Bronze, Silver Plate

MATERIAL: ..020 [.50] Dia. Phospher Bronze, Silver Plate

.200 [5.1]

.100 [2.5]

CAT. NO. 5025

CAT. NO. 5026

.040 [1.0] (2) PLS.

.040 [1.0] (2) PLS.

MATERIAL: Brass, Gold Plate

60

®

www.keyelco.com 55 S. Denton Avenue, New Hyde Park, NY 11040

Tel (516) 328-7500 • Fax (516) 328-1080 (800) 221-5510 • kec@keyelco.com

RoHS COMPLIANT ~ ISO 9001 CERTIFIED