JM Test Systems Product and Services Catalog Vol. IV 2024

ELECTRICAL TEST

CABLE FAULT LOCATOR

CABLE LOCATOR MEGGER EASYLOC

• Make optimum preparations for your building work, quickly and reliably • Avoid cable damage and help to minimise costly accidents and inconvenient delays • Depth measurement at the push of a button, even without a transmitter • 33 kHz – compatible with other location systems • Large display with automatic backlight • Quick and simple to operate Utility location system to detect and trace cable runs and pipe networks. The Easyloc is fast and simple to operate, with features designed to avoid potentially dangerous power cables and other services as efficiently as possible. Easyloc is suitable for water, rail, gas, power, highways and telecommunication utilities and contractors and anyone who is proposing to engage in groundworks. Effective and efficient location of cables and pipes

NEW

TECHNICAL DATA Reveiver RX (all versions) Operating Time

> 40 hours

Power Supply

10 x IEC R6 1.5 V (AA)

Working / Storage Temp

- 20° C ... + 55° C / - 40° C ... + 70° C

Weight

2.5 kg

ORDER #

DESCRIPTION

PRICE

Dimensions

10 x 67 x 26 cm

Easyloc Rx receiver 50Hz/R/33kHz; Easyloc Tx transmitter 33kHz; Grounding set, complete; with carrying case. English version Receiver set 50 Hz/R/33 kHz with depth measurement, no carry bag, English version 33 Hz transmitter set, with grounding set, without bag, English version

MEG-EASYLOC-RXT

CALL

Protection Class

IP 56 IP 67 (up to the bottom of the battery case)

MEG-EASYLOC-RX

$ 2,045 .00

Transmitter TX (all versions) Operating Time

> 40 hours

MEG-EASYLOC-TX

$1, 71 0.00

Power Supply

6 x IEC R20 1.5 V (D)

Working / Storage Temp

- 20° C ... + 55° C / - 40° C ... + 70° C

AVAILABLE FOR RENT

Weight

2.6 kg

Dimensions

26 x 25.5 x 14 cm

Protection Class

IP 54

CABLE HEIGHT METER MEGGER CHM600

• Dramatically reduces measuring time • Inherently safe • Designed for ease-of-use • Hand-held portability

• Calibration and maintenance free operation • No physical connection to cables or wires • Measures the height of up to six overhead cables

The CHM Series of Cable Height Meters utilize ultrasonic sound to determine the height of up to six overhead cables and wires. The instruments are designed to address specific measuring requirements on cables up to 75 feet (23 m). The CHM600 (C/N 659600) and CHM600E (C/N 659600E) are designed primarily for power cable applications, while the CHM2000 is designed for telecommunication applications. The Cable Height Meters emit short bursts of sound which originate from the cone shaped transmitter. The microprocessor in the instruments calculates the elapsed time for the bursts of sound to be reflected from the cable back to the instruments. The result can be displayed in either feet and inches or meters. However, before the final measurement can be displayed, the air temperature must be measured because the speed of sound varies at approximately 0.2 percent per degree Celsius. A temperature sensor, mounted at the front of the instruments, senses the actual air temperature. This information is sent to the microprocessor and incorporated into the algorithm. The distance is then displayed in meters or feet and inches depending on which was selected.

CABLE FAULT LOCATOR

NEW

Standard Accessories Include: 9 - volt alkaline leak-proof battery

ORDER #

DESCRIPTION

PRICE

Dimensions: 3 H x 4 W x 8.5 D in.

Weight: 1.1 lbs

Unit with Standard Accessories

MEG-CHM600

$1, 28 5.00

AVAILABLE FOR RENT

**PRICES ARE SUBJECT TO CHANGE**

JMTEST.COM • 800.353.3411

98