JM Test Systems Product and Services Catalog Vol. IV 2024

MECHANICAL & INSPECTION

VIBRATION

LOW FREQUENCY PORTABLE VIBRATION SHAKERS AND CALIBRATORS THE MODAL SHOP 9200 SERIES

Model 9200D Low Frequency Portable Shaker Table is designed to verify critical vibration instrumentation used to protect slow speed rotating equipment as low as 0.7 Hz (42 CPM). This Shaker Table is ideal for loop checks on vibration monitoring systems protecting slow speed machinery as well as testing emergency seismic detection and shutdown systems. Model 9210D Low Frequency Portable Vibration Calibrator allows generation of ISO 17025 compliant vibration calibration certificates, reducing perceived insurance risks and promoting a safe working environment. This product is ideal for creating ISO 16063-21 compliant accelerometer calibration certificates for high sensitivity, low frequency transducers. The Portable Calibrator also makes it easy to test for sensitivity drift on velocity sensors, velometers or moving coil displacement sensors.

AVAILABLE FOR RENT

9210D Calibrator

Manufacturer / Model

TMS / 9210D

TMS / 9200D

GENERAL Frequency Range (operating)

0.7 Hz - 2 kHz (42 - 120 k CPM)

0.7 Hz - 2 kHz (42 - 120 k CPM)

Maximum Amplitude (50 Hz, 10 gram payload)

2 g pk (100 Hz) | 19.6 m/s2 pk (100 Hz)

2 g pk (100 Hz) | 19.6 m/s2 pk (100 Hz)

12 in/s pk (10 Hz) | 305 mm/s pk (10 Hz)

12 in/s pk (10 Hz) | 305 mm/s pk (10 Hz)

200 mils pk - pk (1 Hz) | 5 mm p-p (1 Hz)

200 mils pk - pk (1 Hz) | 5 mm p-p (1 Hz)

Max Payload (vertical)

800 grams

800 grams

Test Operation

Manual (Closed Loop), Semi-Automatic Stepped Sine with Pass/Fail

Manual (Closed Loop), Semi-Automatic Stepped Sine

ACCURACY OF READOUT Acceleration (5 Hz to <10 Hz)

± 10 % (0.7 - 2 Hz)

± 10 % (0.7 - 2 Hz)

Acceleration (10 Hz to 10 kHz)

± 3 % (2 Hz - 2 kHz)

± 3 % (2 Hz - 2 kHz)

Velocity (10 Hz to 1000 Hz)

± 3 % (2 Hz - 2 kHz)

± 3 % (2 Hz - 2 kHz)

Displacement (30 Hz to 150 Hz)

± 3 % (3 - 15 Hz)

± 3 % (3 - 15 Hz)

UNITS OF READOUT Acceleration

g pk (m/s² pk) | g rms (m/s² rms)

g pk (m/s² pk) | g rms (m/s² rms)

Velocity

in/s pk (mm/s pk) | in/s RMS (mm/s rms)

in/s pk (mm/s pk) | in/s RMS (mm/s rms)

Displacement

mils pk – pk (um pk-pk)

mils pk – pk (um pk-pk)

Frequency

Hz (cpm)

Hz (cpm)

Sensor Under Test Sensitivity

mV/EU

No Connection

POWER REQUIREMENTS Max Operating Battery Life

14 Hours (100 grams, 100 Hz, 1 g pk)

14 Hours (100 grams, 100 Hz, 1 g pk)

INPUT/OUTPUT Test Sensor Input

ICP & AC Voltage

No Connection - The 9200D is used for loop checks, aka system testing and the confirmation of vibration shutdown alarms in an indutrial applica tion.

Test Sensor Input Connection

BNC Jack

No Connection

Charge/ICP Toggle Dial?

No

No

MEMORY / CREATING CALIBRATION RECORDS Calibration Records

500

No Memory

Points per Record

30

No Memory

Calibration Certificate Format

ISO 17025 compliant, frequency response & amplitude linearty graphs with deviation percentages. Fully Customizable Up to 30 Test Points with Pass/Fail Upper & Lower Bound Tolerances for Each Point Frequency Response, Linearity, DC Proximity Probe Linearity Plot, 4-20 mA DC Linearity Plot, Vibration Analyzer / Meter Linearity & Frequency Response Accuracy

Not Applicable

Programmability

Up to 30 Test Points, no pass/fail notifcation or programming.

Calibration Certificate Creation Capability

None

PHYSICAL Dimensions (H x W x D)

8.5” x 12” x 10” (22 cm x 30.5 cm x 28 cm)

8.5” x 12” x 10” (22 cm x 30.5 cm x 28 cm)

Weight

18 pounds (8.2 kg)

Optional Proximity Probe Mounting Adaptor

9100-PPA01 (English mils), 9100-MPPA01 (metric microns), 9100-PPASH (English & Metric, mounts 8mm, 11mm probes & reverse mount probes in probe housing)

9100-PPA01 (English mils), 9100-MPPA01 (metric microns), 9100-PPASH (English & Metric, mounts 8mm, 11mm probes & reverse mount probes in probe housing)

Proximity Probe Case Threads Supported with Optional Kits

1/4", M6, 3/8", M8, M10, 1/2", 5/8", M14, M16

1/4", M6, 3/8", M8, M10, 1/2", 5/8", M14, M16

Supplied Transducer Mounting Adaptors

1/4"-28 stud, 10-32 stud, M8x1 M&F (magnetic), M8x1.25 M&F (magnetic)

Supplied Power/Signal Conditioning & Cabling

None

391

JMTEST.COM • 800.353.3411