JM Test Systems Product and Services Catalog Vol. IV 2024

MECHANICAL & INSPECTION

VIBRATION

PORTABLE VIBRATION SHAKERS AND CALIBRATORS THE MODAL SHOP 9100 SERIES

Model 9100D Portable Shaker Table is an ideal tool to field check accelerometers, velocity transducers, and proximity probes over a wide operating frequency and amplitude range. Designed to withstand the harsh conditions of the industrial environment, the Portable Shaker Table can be taken directly to the location of installed sensors – eliminating downtime and making regular calibra tion a viable option. Model 9110D Portable Vibration Calibrator , building on the benefits of the 9100D, offers real-time calculation and display of test sensor sensitivity, saves calibration records and facilitates generation of calibration certificates. The Portable Calibrator allows technicians to program repetitive calibra tion test points and pass/fail tolerances for both frequency response and linearity. The unit is an ideal tool for identifying and troubleshooting proximity probe installation errors. Model C9110D Portable Vibration Calibrator with Charge Amplifier Input , similar to Model 9110D, supports the calibration of both single-ended and differential charge accelerometers. The unit is supplied with a 7/16-27 2-pin MIL to BNC cable for the calibration of high temperature turbine vibration sensors that have a differential output.

9110 Series Calibrator

AVAILABLE FOR RENT

Manufacturer / Model

TMS / 9100D

TMS / 9110D

TMS / C9110D

GENERAL Frequency Range (operating)

5 Hz – 10 kHz (300 - 600 k CPM)

Maximum Amplitude (50 Hz, 10 gram payload)

20 g pk (196 m/s2 pk) 20 in/s pk (500 mm/s pk) 150 mils pk - pk (3.8 mm p-p)

Max Payload (vertical)

800 grams

Test Operation

Manual (Closed Loop), Semi-Automatic Stepped Sine Manual (Closed Loop), Semi-Automatic Stepped Sine with Pass/Fail

ACCURACY OF READOUT Acceleration (5 Hz to <10 Hz)

± 5 %

Acceleration (10 Hz to 10 kHz)

± 3 %

Velocity (10 Hz to 1000 Hz)

± 3 %

Displacement (30 Hz to 150 Hz)

± 3 %

UNITS OF READOUT Acceleration

g pk (m/s² pk) | g rms (m/s² rms)

Velocity

in/s pk (mm/s pk) | in/s RMS (mm/s rms)

Displacement

mils pk – pk (um pk-pk)

Frequency

Hz (cpm)

Sensor Under Test Sensitivity

No Connection

mV/EU, mA/EU, µA/EU, pC/EU

POWER REQUIREMENTS Max Operating Battery Life

18 Hours (100 Hz 1 g pk)

18 Hours (100 Hz 1 g pk)

18 Hours (100 Hz 1 g pk)

INPUT/OUTPUT Test Sensor Input

No Connection - The 9100D is used for loop checks, aka system testing and the confirmation of vibration shutdown alarms in an indutrial application.

ICP, AC Voltage, Differential & Single-Ended Charge (with external charge amp), Modulated Current (with external signal conditioner), PR (with external signal conditioner)

ICP, AC Voltage, Differential & Single-Ended Charge, Modulated Current (with external signal conditioner), PR (with external signal conditioner)

Test Sensor Input Connection

No Connection

BNC Jack

Two BNC Jacks - ICP/Voltage/Current & Charge

Charge/ICP Toggle Dial?

No

Yes

MEMORY / CREATING CALIBRATION RECORDS Calibration Records

No Memory

500

Points per Record

No Memory

30

Calibration Certificate Format

Not Applicable

ISO 17025 compliant, frequency response & amplitude linearty graphs with deviation percentages. Fully Customizable

Programmability

Up to 30 Test Points, no pass/fail notifcation or programming.

Up to 30 Test Points with Pass/Fail Upper & Lower Bound Tolerances for Each Point

Calibration Certificate Creation Capability

None

Frequency Response, Linearity, DC Proximity Probe Linearity Plot, 4-20 mA DC Linearity Plot, Vibration Analyzer / Meter Linearity & Frequency Response Accuracy

PHYSICAL Dimensions (H x W x D)

8.5” x 12” x 10” (22 cm x 30.5 cm x 28 cm)

Weight

18 pounds (8.2 kg)

18 pounds (8.2 kg)

18 pounds (8.2 kg)

Optional Proximity Probe Mounting Adaptor

9100-PPA01 (English mils), 9100-MPPA01 (metric microns), 9100-PPASH (English & Metric, mounts 8mm, 11mm probes & reverse mount probes in probe housing)

Proximity Probe Case Threads Supported with Optional Kits

1/4", M6, 3/8", M8, M10, 1/2", 5/8", M14, M16

VIBRATION

Supplied Transducer Mounting Adaptors

1/4"-28 stud, 10-32 stud, Multi-Hole Mounting Plates for 3 and 4-hole patterns, M8x1 M&F (magnetic), M8x1.25 M&F (magnetic)

Supplied Power/Signal Conditioning & Cabling

None

045ET005AC 7/16 2-pin MIL to BNC Cable for Differential Charge Accelerometers

389

JMTEST.COM • 800.353.3411