2017 Equipment & Parts Catalog

TENDERS

WL1600 Rear Discharge Tender The WL1600 is ideal for commercial fertilizer dealers, cus- tom applicators, and large farming operations. It’s 30° minimum hopper slope allows for fast material flow and cleanout. Discharge rates range from 2,400 pounds of urea per minute to 4,000 pounds of potash per minute. • 14 gauge 409 SS 2 compartment hopper w/ gate & 30° minimum side slope • Fenders, mud flaps, & driver side hopper access ladders • SS hopper, control gate, track clean out, & dump gate • Frame rails & cross members are structural C-channel • Cross members are 11 gauge rectangular tubing • Hydraulic auger shut-off controls for discharge auger • 10 gallon hydraulic oil reservoir • Hydraulic PTO drive • 10" x 21' 7 gauge 409 SS hydraulic cylinder auger w/ lift & on/off control *32,000 lb (14,515 kg) or 40,000 lb (18,144 kg) gross volume weight (GVW) truck requirement. Willmar’s 16 ton and 24 ton side-shooting tenders can be either truck or trailer mounted* and can move up to two tons of material a minute. Loads of capacity. The 16-ton version holds an incredible 516 ft 3 struck and 578 ft 3 heaped while the 24-ton weighs in with a struck capacity of 774 ft 3 and 867 ft 3 heaped. The one-piece, adjustable, swing-away auger engages with a spring-loaded back to eliminate spillage.The hydraulic drive with PTO-powered pump has a large, 25 gallon hydraulic oil reservoir so you’ll always have power when you need it. • 14 gauge 409 SS 4 compartment hopper w/ individual SS gate & 40° side slope • Both belly dumping & rear dumping capability • Viewing platform & hopper access ladder • Frame rails are structural C-channel • Cross members are weldments of 7 gauge mild steel & 3/8" medium carbon steel • Individual hydraulic auger shut-off controls for horizontal & discharge auger • 25 gallon hydraulic oil reservoir • WL16 auger: 10" x 17' 7 gauge 409 SS hydraulic discharge w/ hydraulic raise, lower, & swing • WL24 auger: 10" x 20' 7 gauge 409 SS hydraulic discharge w/ hydraulic raise, lower, & swing *46,000 lb (20,909 kg) gross volume weight (GVW) truck or trailer requirement, depending on model. Trailer by Behnke Enterprise, Inc.: • Main frame: 16" 26 lb I-Beam fifth wheel • Capacity: 45,000 lb GVWR • Axle: (1) 22,500 lb oil bath heavy duty axle w/ anti-lock air brakes, automatic slack adjusters, & park brake WL16 & WL24 Ton Side Shooter Tender

EQUIPMENT

NOTE: PTO drive selection requires a truck with SAE "B" flange with ⅞" x 13 tooth spline PTO for direct mounting of the hydraulic pump. Requires PTO speed range of 1,500 - 2,000 rpm at desired throttle setting during tender operation. PTO speeds above the recommended range WILL cause premature failure of the hydraulic pump and motor.

NOTE: Drive selection requires: pump input speed - 2,000 rpm maximum at desired setting, torque capacity - 225 ft-lb, shaft size - 1-¼" straight shaft with 5/ 16 " sq key, pump mount - SAE "B" flange, rotation - counter-clockwise, hydraulic requirements - (2) 25-gpm tandem 1-¾" pumps with 1" shaft and ¼" keyway @ 2500 PSI. PTO speeds above the recommended range WILL cause premature failure of the hydraulic pump and motor.

• Wheels: (8) 22.5 x 8.25" Budd style dual wheel w/ 10 on 11.25" • Tires: (8) 255/70R-22.5 Bridgestone tire • Hitch: King Pin, 48" clearance, 2" SAE w/ ⅜" bolster plate

14 | INDEPENDENT AG EQUIPMENT PRODUCT CATALOG | PA: 800-345-3546 | OH & IN: 800-848-8460 | www.IndependentAg.com