Independent Ag Equipment

BELT DRIVEN FRAME MOUNTED PUMPS

FRAME MOUNT ADVANTAGES Ace belt driven pumps are available in a variety of models which can be belt driven or direct coupled to a power source. The pumps are available in either clockwise or counterclockwise rotation. The standard bare shaft pumps are designed with a keyway for mounting a drive pulley or coupling.

PUMPS

FMC-CW-150

FMC-200

FMC-CW-200

KEY SHAFT DRIVEN

EDP No

Est. Ship Weight

Description

Part No.

Price

1-¼” x 1” NPT, Max. 70 GPM, Max. 130 PSI

46800 18 lb

FMC

619.77

1-½” x 1-¼” NPT, Max. 80 GPM, Max.100 PSI

47200 11 lb

FMC-CW-150

628.36

2” x 1-½” NPT, Max. 200 GPM, Max. 120 PSI

47400 24 lb

FMC-CW-200

822.27

2” x 1-½” NPT, Max. 180 GPM Max. 170 PSI

47550 42 lb FMC-CW-800-DRB 1761.41

MAGNETIC CLUTCH DRIVEN ADVANTAGES The integral magnetic clutch driven centrifugal pump design was first offered by Ace in 1982. These mod- els enabled the operator to free the PTO shaft and hydraulic system for other uses. The 12 volt DC mag- netic clutch is driven by a v-belt from the engine drive shaft. The clutch is idle until engaged by an on-off toggle switch located at the driver’s seat.

MAGNETIC CLUTCH BELT DRIVEN

FMC-650-MAG-D

EDP No

Est. Ship Weight

Description

Part No.

Price

1-¼” x 1” NPT, Max. 70 GPM, Max. 130 PSI

47040 23 lb

FMC-MAG-D 1178.18

1-¼” x 1” NPT, Max. 70 GPM, Max. 130 PSI

47195 23 lb

FMC-CW-MAG-D 1178.18

1-½” x 1-¼” NPT, Max. 130 GPM, Max.120 PSI

47030 25 lb

FMC-150-MAG-D 1196.59

1-½” x 1-¼” NPT, Max. 80 GPM, Max.100 PSI

47237 25 lb FMC-CW-150-MAG-D 1200.27

220 x 200 flange, Max. 140 GPM, Max. 160 PSI

47055 35 lb

FMC-650-MAG-D 2055.68

2” x 1-½” NPT, Max. 180 GPM, Max. 170 PSI

47570 45 lb FMC-CW-800-MAG-D 3000.68

BELT DRIVEN

EDP No

Est. Ship Weight

Description

Part No.

Price

220 X 200 flange and 1-½” X 1-¼” NPT, Max. flow: 170 GPM Max. pressure: 160 PSI, E-coated cast iron centrifugal driven by a ⅞” keyed CCW rotating shaft. 1-½” NPT suction X 1-¼” NPT discharge, Max. flow: 170 GPM Max. pressure: 160 PSI, E-coated cast iron centrifugal driven by a ⅞” keyed CW rotating shaft. 300 flange suction X 220 flange discharge, Max. flow: 290 GPM Max. pressure: 150 PSI, E-coated cast iron centrifugal driven by a ⅞” keyed CCW rotating shaft.

47057 40 lb

FMCWS-650F 2190.68

47058 40 lb FMCWS-CW-650 2098.64

FMC-750F

47070 48 lb

FMC-750F

2432.45

127