GVM Ag Parts Catalog 2021

CENTRIFUGAL PUMPS

The Banjo Wet Seal Pump is equipped with a double seal arrangement where the seal is contained in an ethylene WET SEAL SELFPRIMING CENTRIFUGAL PUMP

POLYPROPYLENE SELFPRIMING CENTRIFUGAL PUMP The pump is molded from a special high strength polypropylenewhich is glass reinforced for strength and toughness.The rubber parts are made of EDPM compound. Also available in Buna “N” and Viton rubber parts.

PUMPS

glycol (antifreeze) reservoir. This enables the pump to run dry for short periods of time without damaging the • Sight tube indicator • Dynamic balanced impeller • All SS hardware

200PH-5 Honda

• Precision molded construction • Corrosion resistant • Low maintenance • Lightweight

Warning: Do not run pump dry, restrict, or reduce port sizes or dead head pump, this could cause pump failure.

NOTE: Engine warranty service available at authorized Briggs & Stratton and Honda dealers. Size Inlet & Outlet HP Part No. Complete pump w/ Honda engine 2" x 2" 5 200PIH5W Cast iron pump (wet seal) 3" x 3" 11 301PIH-13W Description

200P6PRO

Size Inlet & Outlet HP

Est. Ship Weight Part No.

Description

Complete pump & gas engine Complete pump & gas engine Complete pump & Honda gas engine

2" x 2"

3 40

200P-3

2" x 2"

6.5 45 200P6PRO

2" x 2"

5 48 200PH-5

PUMPS

CAST IRON CFLANGED PUMP • C-flanged pump packs complete & ready for quick & easy assembly. Impellers cut to size as needed. • Pump only packs complete and ready for attachment to gasoline engine. Warning: Do not run pump dry, restrict, or reduce port sizes or dead head pump, this could cause pump failure.

BEARING PEDESTAL PUMPS With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. Description 2" pump/bearing pedestal ¾" shaft 3" pump/bearing pedestal 1" shaft Bearing pedestal for 1-½" & 2" pumps

Description 2" x 2" pump

Specify

Part No.

Part No. 200PBI 300PBI 12882A

⅞ " shaft sleeve

200POICF7/8

PUMP ONLY–GASOLINE ENGINES

Description

Part No. 150POI 200POI 300POI

Bearing pedestal for 3" pump

18500

1-½" pump only

2" pump only 3" pump only

3 . CAST IRON PUMP MANIFOLD FLANGES Description

PEDESTAL PUMP FOR ELECTRICAL MOTORS Description Size Inlet & Outlet

Part No. M18008 M18012

Part No. 200PB-SS 300PB-SS

3" manifold outlet fl ange 3" manifold inlet fl ange

2" pump/bearing pedestal 1-¾" shaft 3" pump/bearing pedestal 1" shaft Pedestal pump poly bearing 2-¾" Pedestal pump poly bearing 3"

2" x 2" 3" x 3" 2" x 2" 3" x 3"

200PB 300PB

65 | GVM INCORPORATED PRODUCT CATALOG | PA: 800-345-3546 | OH & IN: 800-848-8460 | MO: 573-475-9496 | gvmdist.com