GVM Ag Parts Catalog 2021

PTO BELT DRIVEN CENTRIFUGAL PUMPS Consult the internet Selection Guide at www.AcePumps.com to determine which pump is right for you.

PUMPS

1-¼ IN. SUCTION X 1 IN. DISCHARGE Fully guarded for operator safety.

1-½ IN . SUCTION X 1-¼ IN . DISCHARGE Fully guarded for operator safety.

Max PSI

Est. Ship Weight

Max PSI

Est. Ship Weight

Description

Part No.

Description

Part No.

Cast iron straight cen- trifugal w/ pulleys, 10 groove belt assembled for direct mounting on 1- ⅜ ", 600 RPM PTO shaft; equipped w/ quick coupler, Viton mechani- cal seal Cast iron straight centrifugal w/ pulleys & 10 groove belt, 1" diameter stub shaft & integral mounting base for 600 RPM Tumblerod Cast iron straight centrifugal w/ pulleys & 10 groove belt, 1" diameter stub shaft & integral mounting base for 1000 RPM Tumblerod drive shaft, Viton mechanical seal

100 51 lb PTOC-150-600-6SPQC

Cast iron straight centrifugal w/ pulleys & 10 groove belt arranged for direct mounting on 1- ⅜ " 600 RPM PTO shaft, equipped w/ 6 spline quick coupler PTO drive shaft, Viton mechanical seal Cast iron straight centrifugal w/ pulleys & 10 groove belt. 1" diameter stub shaft & integral mounting base, 600 RPM Tumblerod drive shaft,Viton mechanical seal Cast iron straight centrifugal pump only for PTOC models machined for idler arm

70 46 lb PTOC-600-QC

70 42 lb PTOC-600-B

100 52 lb

PTOC-150-600-B

18 lb

FMC-MIA

100 45 lb PTOC-150-1000-B

PTO SHAFT OPTIONS

drive shaft, Viton mechanical seal

Cast iron straight centrifugal pump only for PTOC-150 models, machined for idler arm

— 23 lb

FMC-150-MIA

-6SPQC Instant-attach quick coupler for 540 RPM models

-B 1 inch (25.4 mm) stub shaft for installation on trailer sprayers driven by PTO tumblerod

BELT DRIVEN CENTRIFUGAL PUMPS

FRAME MOUNT ADVANTAGES Ace belt driven pumps are available in a variety of models which can be belt driven or direct coupled to a power source. The pumps are available in either clockwise or counterclockwise rotation.The standard bare shaft pumps are designed with a keyway for mounting a drive pulley or coupling.

KEY SHAFT DRIVEN

Max GPM

Max PSI

Est. Ship Weight

FMC-200

Description 1-¼" x 1" NPT 1-½" x 1-¼" NPT 2" x 1-½" NPT

Part No.

70 130 80 100 200 120

18 lb 11 lb 24 lb

FMC

FMC-CW-150

FMC-CW-150 FMC-CW-200

FMC-CW-200

63 | GVM INCORPORATED PRODUCT CATALOG | PA: 800-345-3546 | OH & IN: 800-848-8460 | MO: 573-475-9496 | gvmdist.com