GVM Ag Parts Catalog 2021

CENTRIFUGAL PUMPS & BREAKDOWN

Consult the internet Selection Guide at www.AcePumps.com to determine which pump is right for you.

POLYPROPYLENE HYDRAULIC MOTOR DRIVEN

• Suction 1", discharge ¾" º 204 motor requires 4 GPM (15.1 LPM) hydraulic flow on PC closed & open center systems º 206 motor requires 7 GPM (26.75 LPM) hydraulic flow on LS closed & open center systems

• Integral needle valve bypasses up to 9 GPM (34 LPM) on open center systems • Standard Viton® carbon/ceramic or optional severe duty silicon carbide mechanical seal • Polypropylene corrosion resistant construction • SS shaft & hardware

PUMPS

4

3

Ref. No.

Qty. Req’d

2

Part No.

Description

1

1 2

GE-12-75 Volute, ¾" x 1", polypropylene

1

GE-26-75 Impeller, w/ keyway, polypropylene 1 3 BAC-7-75V Seal, ⅝", Viton/silicon carbide (opt.) 1 4 40017 O-ring, volute seal 1 5 BAC-54 Slinger 1 6 BAC-33 Snap ring, internal, BAC-14 mounting frame 2 7 BAC-37 Bearing, BAC-6 driven shaft 2 8 BAC-32 Snap ring, external, BAC-6 driven shaft 2 9 BAC-32-S Spacer for BAC-6 shaft 1 10 BAC-75-HYD-204 Hydraulic motor, 4 GPM 1 10 BAC-75-HYD-206 Hydraulic motor, 7 GPM 1 11 41875 O-ring, #8 SAE fi tting 2 12 BAC-78-8SAE Reverse check assembly, #8 SAE male x ½" NPT female 1 13 LS-206N Flow limiting valve (206), #8 SAE male x ½" NPT female 1

10

13

6

7

8

9

8

7

12

5 6

11

Description Part No. Polypropylene hydraulic motor driven pump FMC-75-HYD-204

STAINLESS STEEL HIGH PERFORMANCE HYDRAULIC MOTOR DRIVEN

• Standard Viton® carbon/ceramic seal or optional severe duty silicon carbide mechanical seal • Chemical resistant Valox® or optional cast iron impeller

• Suction 220 flange & 1-½" NPT • Discharge 200 flange & 1-¼" NPT • 316 SS construction, SS shaft & wear ring • Recommended for use on the following hydraulic systems: º Pressure compensating closed center º Load sensing or pressure flow compensating closed center

Ref. No.

Qty. Req’d

Part No. BAC-53 BAC-23-A

Description

1 2 2

Pipe plug

4 1 1 1 1 1 1 1 1 2 2 2 1 1

º Open center up to 16 GPM (60.6 LPM) • Integral needle valve bypasses up to 9 GPM (34 LPM) on open center systems

Nut, ⅜ " NF, cad plated

BAC-23-A-SS Nut, ⅜ " NF, SS (optional)

3 BAC-24-HYD-SS Washer, ⅜ " star, SS 4 BAC-26-150-P Impeller, Valox, keyway

7

5

BAC-7V

Seal, carbon/ceramic/Viton (includes 40160 O-ring)

5 6

4

5

BAC-7SC Seal, silicon carbide/Viton (in- cludes 40160 O-ring) (optional)

2 3

6

BAC-4-150

O-ring, body seal

1

7 BAC-14-150-HYD-SS Mounting frame, 316 SS (for 150FS models)

19

18

8 9

BAC-54 BAC-33 BAC-37 BAC-32

Slinger

Snap ring, internal, BAC-14 mounting frame Ball bearing, sealed, BAC-6 shaft Snap ring, external, BAC-6 shaft

17

10 11 12 13

13

BAC-32-S BACH-25

Spacer for BAC-6 shaft

16

Key, ⅛ " x ⅛ " x ½" 1 14 BAC-6-HYD-SS Shaft, ⅝" diameter, keyway & tang slot, SS 1 15 BAC-75-HYD-206 Hydraulic motor, 7 GPM (includes parts 18 - 25) 1 16 BAC-75-HYD-206N Hydraulic motor, 7 GPM (motor only - no external fi ttings) 1 17 BAC-78-8SAE Reverse check valve, #8 SAE male x ½" NPT female 1 18 BAC-80-8SAE Adapter, restrictor body, #8 SAE male x ½" NPT female 1 19 LS-206N Flow limiting valve (206N), #8 SAE male x ½" NPT female 1

14

15

9

10

11 12 11

10

9

8

Description Part No. SS high performance motor driven pump FMC-150FSHYD-206

61 | GVM INCORPORATED PRODUCT CATALOG | PA: 800-345-3546 | OH & IN: 800-848-8460 | MO: 573-475-9496 | gvmdist.com