GVM Ag Parts Catalog 2021

ROLLER PUMPS Hypro roller pumps are known for their durability and long running capabilities, in fact, Hypro pumps last (on average) 2-½ times longer than the competition. This is due, in part, to the pumps’ high “Brinel” rating.Other pumps use a softer iron that can’t be finished as smoothly, and consequently, these pumps wear out earlier. Models range from 4-8 rollers per pump and come standard with Hy- pro’s “Super Roller” material. The pumps operate efficiently at PTO speeds of 540 and 1000 RPM. Pressure ranges are up to 300 PSI with flow rates of 2-74 GPM.The pump should be run at maximum pres- sure for only short periods of time to prevent premature pump failure.

• Housing is available in cast iron, Ni-Resist or SilverCast. Ni-Resist is a high nickel-content alloy for better corrosion resistance. SilverCast is a custom alloy that provides the best corrosion resistance when used with herbicides such as Roundup® • Self-priming operation; DO NOT run dry • Easily adaptable to PTO or gas engine drives • Standard seals are Viton or Buna-N • Standard super rollers are made from a combination of materials that provide the chemical resistance of nylon & the life of polypropylene. Super Rollers are ideal for use with water-soluble chemicals & emulsifiable concentrates. Super Rollers should not be used with acidic fertilizer. Polypropylene & Teflon rollers are available.

PUMPS

4001 ROLLER SERIES PUMPS

Max. GPM

Max. PSI

Max. RPM

Est. Ship Weight

Description

Part No.

12V DC motor-driven, Ni-Resist pump w/ Super Rollers, Viton seals, ¾" NPT ports, ½" hollow shaft designed for higher pressures

9.9 60 1600 18 lb 4001N-E2H

4101 ROLLER SERIES PUMPS

Max. GPM

Max. PSI

Max. RPM

Est. Ship Weight

Description

Part No. 4101C-A

Cast iron pump w/ Super Rollers, Viton seals, ¾" NPT ports, & ⅝" solid shaft

7.0 150 2600 5 lb

4101N pump w/ ½" hollow shaft

7.0 150 2600 5 lb

4101N-H

4101C

12V DC motor-driven, Ni-Resist pump w/ Super Rollers, Viton seals, ¾" ports, ½" hollow shaft

7.0 50 2600 16 lb 4101N-EH

SilverCast pump w/ Super-Rollers, Viton seals, ¾" NPT ports & ⅝" solid shaft SilverCast 4101XL pump w/ ½" hollow shaft

7.0 150 2600 5 lb 4101XL-A

7.0 150 2600 5 lb 4101XL-AH

4101N

6500 6-ROLLER SERIES PUMPS

Max. GPM

Max. PSI

Max. RPM

Est. Ship Weight

Description

Part No.

Note: Rotation, clockwise or counterclockwise is determined when looking at the shaft end of the pump. Ni-Resist pump w/ Super Rollers, Viton seals, ¾" NPT ports, & ⅝" solid shaft Cast iron pump w/ Super Rollers, Viton seals, ¾" NPT ports, & ⅝" solid shaft

22.0 300 1200

9 lb

6500C

22.0 300 1200

9 lb

6500N

1502 6-ROLLER SERIES PUMPS

Max. GPM

Max. PSI

Max. RPM

Est. Ship Weight Part No.

Description

Cast iron pump w/ Super Rollers, Buna-N seal, 1-½" NPT ports, & 15 ⁄

62.0 150 1000 27 lb 1502C

16 " solid shaft

Note: Rotation, clockwise or counterclockwise is determined when looking at the shaft end of the pump.

1700 5-ROLLER SERIES PUMPS

Max. GPM

Max. PSI

Max. RPM

Est. Ship Weight Part No.

Description

Cast iron pump w/ Super Rollers, Viton seals, 1" NPT ports, & 15 ⁄ SilverCast pump w/ Super Rollers, Viton seals, 1" NPT ports, & 15 ⁄

45.0 200 1000 20 lb 1700C

16 " solid shaft

45.0 200 1000 20 lb 1700XL

16 " solid shaft

Note: Rotation, clockwise or counterclockwise is determined when looking at the shaft end of the pump.

7560 8-ROLLER SERIES PUMPS

Max. GPM

Max. PSI

Max. RPM

Est. Ship Weight Part No.

Description

Cast iron pump w/ Super Rollers, Viton seals, ¾" NPT ports, & 15 ⁄ Ni-Resist pump w/ Super Rollers, Viton seals, ¾" NPT ports, & 15 ⁄ SilverCast pump w/ Super Rollers, Viton seals, ¾" NPT ports, & 15 ⁄

22.0 300 1000 13 lb 7560C

16 " solid shaft

22.0 300 1000 14 lb 7560N

16 " solid shaft

22.0 300 1000 13 lb 7560XL

16 " solid shaft

Note: Rotation, clockwise or counterclockwise is determined when looking at the shaft end of the pump.

52