Foland Sales RV Parts & Accessories 2019

WASTE WATER

WASTE WATER 303

NEW Therma Heat Heating Pads

Holding Tank Probes Sludge and soap residue build-up on the sides of RV black and gray water tanks can lead to false

Plumbing Vent Made of high impact plastic, UV stabilized, for vent pipes 1-1/4" or 1-1/2" dia. with projections up to 2-1/2" above roof. Snap-on cap. 72 per case. BULK 3-05032 40032 Polar White 3-05033 40132 Colonial White

ThermaHeat Heating Pads are designed and engineered to protect RV holding tanks, pipe and steps from freezing. All tanks heaters have a built in thermostat that will turn on at 45 F (5C) and off at 67 F (20 C). Pipe and elbow heaters

readings. The sludge acts like a conductor between the positive content level sensors down the tank to the negative probe that is located at the bottom of

are not thermostatically controlled. All heaters have an easy to install peel-e-stick adhesive that adheres to any clean surface. One tank heater will protect up to a 40 gallon holding tank. All heaters carry a 2-year warranty. Tank Heater: 12"x18" with 36" lead wire, 13.5V 4.8A, up to 40 gallon tank or steps built in thermostat. 7-44218 SL-ST1218RT Holding Tank Heater - Up to 40 Gallon $45.99 7-44712 SL-P712RT 3” Pipe Heater - 7-1/2 x 12”, w/ 18” Lead Wire, 13.5 1.7A $32.49

the tank. This will trigger the indicator panel to show that there is liquid level in the tank even when there is none. The patented design of Horst Miracle Probes prevents similar false readings in the following ways: Horst Miracle Probes are considerably longer than standard probes and the sensor is surrounded by a Delrin body and teflon tube which prevents any liquid residue or sludge from setting up a conductive path. The black tank probes have a specially designed "roof" over the probe sensor to prevent toilet paper from coming into contact with the probe and creating a false probe contact and related reading Additional Features:. Easy to install as they fit the 3/8" diameter holes of existing probes. Compatibility with existing wiring and monitors, so they can simply be connected to the new probes. -Available for both black and gray water tanks 7-01300 T21301 Probes For Black Water Tanks,Each $10.39 7-01301 T21301VP Probes For Black Water Tanks,4 Pack $41.49 7-01303 T21302 Probe, For Gray Water Tanks,Each $8.49

$2.39 $2.39

Universal Plumbing Vent Kit Includes the vent plus all the hardware and putty tape

Metal Plumbing Vent Caps Made to fit pipes up to 2" in diameter with a 2-1/2" projection above the roof.

you'll need to install it. Made in USA. 3 per case. 3-05136 40033 Polar White 3-05132 40133 Colonial White

$5.69 $5.69 $6.69

3-05138 40138 Black

3-02003 10003-C Metal Plumbing Vent - Polar White $3.99 3-02004 10004-C Metal Plumbing Vent - Black $3.99

Rubber Tank Grommet

Universal Vent Cap The Universal Vent Cap eliminates the need to

Plumbing Vent Made of high impact plastic, UV stabilized, for vent pipes 1-1/4" or 1-1/2" Dia. with projections up to

replace the entire vent just because of a lost cap top. Cap presses into sewer pipe. 6 per case.

Grommets are for use with polyethylene holding tanks. After installation of grommet into tank hole, drain pipe goes inside tank grommet and seals with a hose clamp (sold separately). 7-02106 F02-2106 Rubber Tank Grommet, 3", Requires A 3-7/8" Tank Hole $10.49 7-02105 F02-2105 Rubber Tank Grommet, 1-1/2", Bagged $7.15

2-1/2" above roof. Snap-on cap. Polar white 3-31050 V2049-01 Plumbing Vent-PW

3-05135 40034 Polar White 3-05134 40134 Colonial White

$4.39 $4.39 $5.15

3-05137 40137 Black

$4.15

Plumbing Vent Mushroom Style Plumbing Vent, Black, Secure, screw-on

Plumbing Vent Cap Made of tough exterior plastic with a weather

Holding Tank Fittings

resistant finish. They feature a unique cap

cap to prevent loss, Standard on many RV units in 2017,Can be

which can be locked on or removed with a twist of the wrist without the need of tools. These vents are made to fit pipes up to 2" in diameter with a 2-1/2" projection above the roof. BULK 3-02001 10001 Vent Cap, Polar White

ABS plastic fitting to glue into ABS holding tanks for toilet and vent. 7-32421 00421 Slip 1-1/2" Flush 7-32422 00422 Slip 2" Flush 7-32423 00423 Threaded 3" Flush

used for any ventilation application 3-19115 02-29115 Mushroom Style Plumbing Vent (Black),1 Pack 3-19125 02-29125 Mushroom Style Plumbing Vent (White),1 Pack

$10.39

$5.49 $6.15 $5.59

$10.39

$1.89

Due To Fluctuating Costs In The Market Place Such As Tariffs, Prices Are Subject To Change Without Notice, Contact Us for Latest Pricing • Special Order