Del City Catalog

hand tools

Crimping Tool – Non-Insulated/Insulated Crimps 26–10 gauge insulated and 22–10 gauge non-insulated terminals. Scissor action strips stranded 26–10 AWG and solid 18–8 AWG wire. Two convenient wire cutting stations. Cuts and rethreads 4–40, 6–32, 8–32, 10–24, and 10–32 machine screws. Crimps 7–8mm ignition terminals. Included in kits no. 277 and 809 (see kit section beginning on page 90-98). Crimping Tool – Non-Insulated/Insulated An excellent tool for multiple uses. The pliers are a wire cutter, bolt cutter, crimping nest for insulated or non-insulated terminals. Can also strip 22–10 gauge solid or stranded wire. Cuts screw sizes: 4–40, 6–32, 8–32, 18–24, 18–32. part no. description crimps gauges 990198 crimping tool 22–10 ga

Scan for pricing or go to www.delcity.net/ catalogpricing

part no. 990141

description

crimps gauges

multi-purpose hand crimp tool

22–10 ga, 26–10 ga

Crimping Tool – Non-Insulated/Insulated For 22–8 gauge non-insulated terminals, 22–14 gauge insulated terminals. Crimps 7mm and 8mm ignition terminals. Strips and cuts wire and also cuts screws. Color-coded crimping nest.

part no. 990145

description crimping tool

crimps gauges 22–8 ga, 22–14 ga

Ratchet Crimping Tool – Open/Insulated Tool 990163 crimps both standard and reinforced (double crimp) terminals in 22–10 gauge. Tool 990168 crimps OEM (open barrel) terminals in 22–12 gauge. Both tools will not disengage until uniform crimp is completed or quick release lever is triggered. Dies have printed key for proper crimp nest.

990163

part no. 990163 990168

description

crimps gauges

ratchet crimping tool

22–10 ga 22–12 ga

OEM ratchet crimping tool

990168

Crimping Tools – Insulated For crimping insulated terminals. Each tool must be fully closed before it will allow itself to open, ensuring a proper crimp.

990165

part no. 990165 990160

description

crimps gauges

ratchet crimping tool ratchet crimping tool

16–8 ga 22–10 ga

990160

Crimping Tool – Insulated Crimps 22–10 gauge barrel and insulation terminals and connectors. Also crimps nylon and vinyl-insulated, butted or brazed seam and standard or short barrel terminals. Spring-loaded locator orients, positions and holds terminal and connector. Must be fully closed before tool allows itself to open, to ensure a proper crimp.

part no. 990130

description

crimps gauges

ratchet crimping tool

10–22 ga

Crimping Tool – Non-Insulated/Insulated Five-station ratchet tool is a single crimp tool with three stations for insulated 22–10 gauge UFSNJOBMT BOE UXP TUBUJPOT GPS OPO JOTVMBUFE o HBVHF UFSNJOBMT 5IF mWF TUBUJPO GFBUVSF allows the tool to serve as a low cost ratchet tool for electrical maintenance and construction.

part no. 990135

description

crimps gauges

ratchet crimping tool

22–10 ga

288