Del City Catalog

relays & power distribution

potted with resistor

part no. 73988 74990*

description

NC/NO 12 volt, 30/50 amp NC/NO 12 volt, 30/50 amp

Scan for pricing or go to www.delcity.net/ catalogpricing

* tinned terminals & flux tight seal Resistor reduces voltage spikes which can damage sensitive electronic equipment.

IP67 Rated

change over relay with diode

part no.

description

73990

NC/NO 12 volt, 30/50 amp

Diode eliminates voltage spikes which can damage sensitive electronic equipment.

* ground diode accordingly

IP54 Rated

with resistor

part no.

description

73992

NC/NO 12 volt, 30/50 amp

Resistor reduces voltage spikes which can damage sensitive electronic equipment.

IP54 Rated

skirted with resistor and bracket part no. description 73994 NC/NO 12 volt, 30/50 amp

Resistor reduces voltage spikes which can damage sensitive electronic equipment.

IP54 Rated

Time Delay Relay The Time-Delay relay has a solid state timing circuit with variable resistor which allows for an adjustable time from 2 seconds to 5 minutes (must remove cover to reach adjustment TDSFX PO CBTF *U JT B OPSNBMMZ PQFO SFMBZ BOE mUT TUBOEBSE PS UFSNJOBM IBSOFTT DPOmHVSBUJPO 5IF NPTU DPNNPO VTF GPS B UJNF EFMBZ SFMBZ JT UP QPXFS B WFIJDMF T DPVSUFTZ (dome) lights, which allows drivers and passengers additional time to exit the vehicle before the courtesy lights go dark. Voltage range: 8.2 ~ 14.8V DC. Operating temperature range: -40°C to 80°C (-40°F to 176°F).

part no.

description

74985

time delay relay

Pre-made Relay Harnesses Molded 5-pole socket base. Manufactured with 12", 14 gauge wire leads. Wire: black-power, red-ground, white-switch, blue & green-end device.

73570

part no.

description

73570 73572

relay socket prewired, 14 gauge, can be used with a standard 5 pin relay socket including standard relay, NC/NO 40/60 amp, 12 volts DC

* 73570 works with any standard 5 pin ISO relay

73572 relay included

Build-Your-Own Relay Harnesses 1MVH JO CBTF GPS SFMBZ NBEF PG JNQBDU SFTJTUBOU NBUFSJBM 6UJMJ[JOH ý Terminals are 16–14 gauge. Use our crimping tool 990168 (page 290).

NN nBU QMVHT

part no.

description

73999

73999

molded base 5-pole (terminals included)

7399920

replacement terminals for molded base (min. 100 pc. qty.)

153