Dave Poske Catalog 2025

ENGINE

CALL 304-428-5000 or 800-430-RACE

MOTOR MOUNTS

DOUBLE PASS OIL COOLER Plate and bar design cooler has two -10 male AN fi ttings.

REAR MOTOR MOUNT

3-1/2” thick. 15” x 6-3/4” (including mounting fl an normal constant operating pressure 80 Psi. maximum Constant Operating Pressure 100 Psi. Burst

nges)

OCT 05-0010 ....................................................... Pair

1/4” Steel with Weight Reduction Hole OCT 05-0032-2................................................... Pair 1/4” Thick Aluminum OCT 05-0030-2................................................... Pair

ALLSTAR CHEVY REAR MOTOR MOUNT

SBC Solid Steel Mounts to Replace Stock OEM Style Rubber Mounts.

Pressure 170 Psi. capacity is 12490 BTUs., 17 Fins Per Inch ALL 30146 .............. Double Pass #10AN/#10AN ity is

Used to Remove Torque. Use with OCT05-0050. OCT 05-0055 ............................. Pair

Fabricated Steel V-8 And V-6 Chevy Motor Mounts. Designed For Circle Track Racing. . ALL 38101 ..............................................One Mount PPM ADJUSTABLE MID PLATE

FSR SUPER DUTY OIL COOLERS

MOTOR MOUNTS

Chevrolet Motor Mounts, .188” zinc plated steel. Replaces OEM No. 332648 when used with 62630 MOR 62515........................................ Motor Mount

ROCKET ADJUSTABLE MID PLATE PPM 1318 ........................................................ Rocket

All Welded Tanks and Mounting Flanges

Solid Motor Mount Pad Kit. Zinc fi nish. 1982-92 Camaro/Firebird, Small Block, Big Block and 90° Chevy V6, use with Moroso Motor Mounts No. 62510 MOR 62610............................Kit Solid Motor Mount Pad Kit. Zinc and yellow chromate plating. 1974-81

FSR 101675D-10 ... Double Pass #10AN/#10AN FSR 101675D-12 ... Double Pass #12AN/#12AN

PETERSON FILTER ELEMENT Square Filter Element 100 Micron Fits Peterson Oil Tanks With Intregral Filter PTR 08-1900 ......................................Filter Element Adding an oil cooler to a vehicle increases engine life and reduces engine operating temperature. Engine oil not only lubricates but also removes a large amount of heat from the engine. Top engine builders recommend and often require use of an oil cooler

ROC PC100-806N3 .......................................Chevy

Camaro/Firebird; 1973-88 Chevelle, Malibu, El Camino; 1973-79 Nova; 1976-90 Impala, Caprice; Small Block, use with Moroso Steel Motor Mounts No. 62515 MOR 62630............................................................Kit

MIDPLATE MOUNT 5 1/2’ Midplate Channel. Made of .085" Steel. OCT 01-34131 ......................Mount

ENGINE SPACERS 1-1/2” OD X 1/2” ID OCT 01-33005 ................1/2” Thick

CT525 MOTOR MOUNTS

The mounts allow a 525 crate motor to be placed in the stock Chevy location or 1” back. Mounts are slotted 1” left to right for further adjustment options. PTC 100-358.........................................................Pair

CHEVY OIL PUMP STUDKIT MOR 38150......................SBC/BBC/90°/V6 Chevy OIL PUMP PRIMER OCT 01-33010 ............................................. 1” Alum OCT 01-33015 ..........................................1.5” Alum

MOTOR MOUNTS

ENGINE LIFTING PLATE

MOR 62200..................................................... Primer

OCT 06-7500 ........Engine Lifting Plate

38109

38108

MOROSO OIL PUMP SHAFT

Mount Is .250”Thick & Replaces Stock Mounts To Eliminate Torque Loss & Excessive Engine Movement Associated With OEM Rubber Mounts. ALL 38108 ........................... 1” Offset Chevy Front ALL 38109 ...................................... 2” Offset Chevy ALL 38113 ..................................... 302-351W Front

Bolts to manifold in place of carburetor.Yellow zinc coated plate fi ts standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet, Carter, Motorcraft, and Edelbroc. ALL 10123 .......................................................... Plate ALLSTAR LIFTING PLATE

MOR 22070...............SBC/90°/V6 Oil Pump Shaft

OIL PUMP STUD

SBC OIL PUMP DRIVE ROD

12 Point Nut, Chromoly, Black Oxide, High Volume Pumps, Chevy V8 ARP 230-7004..........................................................V8

CVP MEIS-55E.............................. Pump Drive Rod

90

POSKE’S PERFORMANCE PARTS - YOUR HARD CORE RACE PARTS AUTHORITY