Dave Poske Catalog 2023

OIL PANS, GASKETS & COMPONENTS

CALL 304-428-5000 or 800-430-RACE

7 QT. CIRCLE TRACK WET SUMP SBC PREMIUM PAN

7 QT. CIRCLE TRACK WET SUMP SBC SPORTSMAN PANS

WET SUMP OVAL TRACKOIL PANS

Louvered Windage Tray increases power,

• 8-Quart Capacity • 6 trapdoors and 3 runners. • Oil level check, temp fi tting, magnetic drain plug. • Bolt in slosh baf fl e with one way screen windage tray with built in scraper. CAN 11-120 ........................7” Small Block Chevy Pre-1980 with Left Side Dipstick 8 Qt. Capacity CAN 20-070 ....Pick Up For 11-120 w/HV Pump CAN 20-071 ............................. Pickup For Melling 10552/10555 Pump COMPETITION WET SUMP OIL PAN

improves oil control & is removable to facilitate cleaning. Kicked

Features trap doors for oil control, removable louvered windage tray & crankscraper.Accepts 3.80" stroke with steel rods & most starter & fl ywheel combos.Will not fi t blocks with splayed main caps. 8” Deep Oil Pan, Oval Track Steel,Wet Sump. Fits SBC 1980 & Older w/2-piece Rear Seal MOR 21308.................................. SB-Chevy 8” Pan MOR 24308.................................. Pickup for M55V Pre-1980 Blocks with Driver-side Dipstick & GM 1978-87 Metric Chassis, aftermarket & Camaro front ends. 7.5” Deep, 10” Long by 11”Wide Sump MOR 21316............................... SB-Chevy 7.5” Pan 1980-1985 Blocks with Pass-side Dipstick & GM 1978-87 Metric Chassis, aftermarket and Camaro front ends. 7.5” Deep, 10” Long by 11”Wide Sump MOR 21317......................Passenger Side Dipstick 1986 & Newer Blocks with 1-pc Rear Main Seal. Fits GM 1978-87 Metric Chassis, aftermarket & Camaro front ends. 7.5” Deep, 10” Long by 11”Wide Sump MOR 21320.............................1-pc Rear Main Seal Pickup fi ts 2316, 2317 & 23120 for M55HV Pump MOR 24316................................For M55HV Pump ONE-PIECE SBCOIL PANGASKET OCT 05-9010 ..............................For LH Dipsticks FEL 1882...... SBC 57-74 1-Pc w/Thick Front Seal FEL 1880......... BBC 75-79 LH Dipstick 1-Pc with Thick Front Seal FEL 1881.........BBC 80-85 RH Dipstick 1-Pc with Trimmed Stroker FEL 1886.....SBC 89-97 Rear Main, Rubber, 5.0/5.7L MULTI-PIECE OILPAN GASKETS FEL 1821B ....................SBC 55-79 Rubber/Steel Core OILPAN 1-PIECE SETS

out sump moves oil level away from rotating assembly, increases capacity to 7 quarts and provides additional ground clearance. Sump is fully baf fl ed with 5 trap doors to provide uninterrupted oil supply under left-turn-only racing conditions. Threaded oil level sight plug built into sump. Fitting for oil temp sender. Accepts strokes up to 3.800". NOTE: OIL PAN CAPACITIES DO NOT INCLUDE OIL FILTER CAPACITY. Use Moroso MOR24104 pick up with M55HV Oil Pump.When using M55HVP Oil Pump, use Canton CAN20-072 with 3\4" pick up tube. MOR 21318................................................ 7-Qt Pan MOR 24104.........................Oil Pump Pickup Tube

OIL HEATERS AND ACCESSORIES 1” Auminum Pipe Plug, Designed for Square Tanks FRG 493207BL.. Plug

Designed for applications where the engine is set extra low in the chassis. Fits front steer chassis with both aftermarket and Camaro front ends. 6-1/2” deep, 15” wide, 12” long sump. 3.75” Stroke Clearance, Six Trap Door Baf fl es & Three Runners, Crank Scraper, Bolt in Slosh Baf fl e, Built in Windage Tray, 1/2” NPT Temperature Bung, Provison for our Pan Mounted Dipstick, & Magnetic Drain Plug. CAN 11-102 ............ Pre-80 SB Left Dipstick, 7qt

PIONEER FREEZE PLUGS

Oil Pre Heater, 400 Watts, 110 Volt, 36” Cord. 1/2” X 14 Thread Nut, 4 3/4” Fitting to Tip. Raises Temperature of 12 Qt Oil 60ºF in 25 Minutes MOR 23991............................................. Pre Heater Internal Oil Pre Heater, 212 Watts,84”Cord 110Volt, 4 3/4” Fitting to Tip, 1” NPT Aluminum Fitting. Raises Temperature of 12 Qt Oil 60ºF in 30 Minutes MOR 23980.............................................Pre Heater Replacement Electric Cord For 23980 MOR 97590.............................. Replacement Cord

Aluminum Oil Pan Bottom Plugs, 6-Pack MOR 97005.........................................Bottom Plugs DRY SUMP OIL PAN BOTTOM PLUGS PIO PE-100 ...............................................350 Chevy PIO PE-100-B ............................... 350 Chevy, Brass PIO PE-101-B ............................... 400 Chevy, Brass

SMALL BLOCK CHEVYOIL PAN STUD KIT Small Block Chevy Oil Pan Studs MOR 38350................ Stud Kit MOROSO OIL PAN BOLTS

OCTANE OIL PAN BOLTS

OCT 05-6085 ........................ Chevy Oil Pan Bolts

Self-Locking Oil Pan Bolts, Small Block and 90 ˚ V6 Chevy and all Oldsmobile V8’s, 18 to a set. MOR 38550...................................................Bolt Set

90

POSKE’S PERFORMANCE PARTS - YOUR HARD CORE RACE PARTS AUTHORITY