Dave Poske Catalog 2023

SHOP TOOLS & ACCESSORIES

ORDER ONLINE @ www.poske.com

UPPERBALL JOINT SOCKET

JOESSHOCK WORKSTATION

OCTANE JACK STANDS

Workstation will hold the shock body and shaft at

Installing Ball joints into A-Arms has never been easier. JOES Upper Ball

Design for asphalt or dirt racing. A 12" X 18" base keeps the car stable on uneven and soft surfaces. 15" tall to provide maximum height. Sold in a set of 4. OCT 06-3300 ......................................... Jack Stands

the same time, making it a lot faster, easier and cleaner to work on your shocks. Above picture shows both pieces together. JOE 19200.............................................................Vise JOE 19250................................... Workstation Base

Joint Socket is machined out of steel, zinc plated & accepts a 1/2" drive ratchet or breaker bar. Now you don't have to use a clumsy Crescent wrench. JOE 40050...........................Upper Balljoint Socket

BERT ALUMINUM AIR LIFT JACK BUMPER ATTACHMENTS Though the Air Jack has been around for decades, the Bert version is designed with the racer’s needs in mind. Completely collapsible for easy storage and sets up quickly for easy use in the

JOES LOWER BALLJOINT SOCKET Installing ball joints has never been easier. JOES Ball Joint Sockets are machined out

ALLSTAR PERFORMANCE SHOCK EYE SOCKET The ideal tool for shock rebuilders or anyone that disassembles shocks on a regular basis! Unique socket safely removes and installs the shock rod end without risk of

of steel, zinc plated and accept a 1/2" drive ratchet or breaker bar. Now you don't have to use that big old clumsy crescent wrench. Fits common lower ball joint sockets that measure 2-1/8". JOE 40075...........................Lower Balljoint Socket

damage to the spherical ball. Steel socket contacts the outer housing of 1/2" rod ends up to .640" wide & has a 1/2" drive for ratchet or impact use. ALL 64255 ................................... Shock Eye Socket HOWEWIDE5 SPINDLE NUT WRENCH Made out of aluminum. HOW 2142............................................... Aluminum SOCKET Made from Anodized Aluminum. OCT 06-3100 ...........................Spindle Nut Socket MOROSO COIL OVER SHOCK ADJUSTING TOOL GRAND NATIONAL SPINDLE NUT

pits. Air operated, the jack only requires 50 psi to reach full extension, making this unit unique, compact and safe.The bumper jack is designed for cars with tubular bumpers like IMCA, UMP and Northeast Modi fi eds. 36" lift with 2,500lb. capacity. BER AJ-BUMPER-IMCA ................. IMCA Bumper Attachments BER AJ-BUMPER-IMCA-EXT4 ......... 4” Extended IMCA Bumper Attachments

OCTANE ROD END GAUGE Accurately SetYour 4-Link and Tie Rod Lengths.

Set Center ToCenter Lengths .Easy To Measure. Keeps Rod Ends Parallel. OCT 06-4500 ................................ Rod End Gauge

OCTANE ONE MAN BRAKE BLEEDER KIT WITH MAGNET

ALLSTAR RACE CAR LIFT

OCT 04-1800 .................... Bleeder Kit

ALLSTAR SHOCKPROOF PRESSURE GAUGE 1-1/2" diameter with stainless steel cases and bezels. Glycerine Filled with brass internals and "engine turned" faces. Gauge has 1/8"NPT connections on back ALL 80200 .................. 0-15 lbs. ALL 80206 ................0-100 lbs. LONGACRE QUICK CHECK BRAKE PRESSURE GAUGE • Check front to

This Allstar lift is intended for use for up to 17” of lift on dirt late models and modi fi eds

weighing 2,400 lbs. Or less. 4 quarts of fl uid are required to fi ll system. Kit includes the following components: ALL11273 lift frame only aluminum & ALL11280 Hydraulic pump for race car lift ALL 11272 ........................................... Race Car Lift

MOR 62030............................Shock Adjusting Tool

LONGACRE CASTER & CAMBER ADAPTERS

JOES UNIVERSAL GO PRO CAMERA MOUNT

JOES GoPro mounts are high quality aluminum mounts that are designed to swivel and pivot so you can aim your camera to get the perfect shot. Our mounts are stronger and more stable than competing mounts, allowing you to get cleaner videos and reducing the chance of you loosing your GoPro. *GoPro & Case not included JOE 60200......................................... Camera Mount

SPINDLE CHECKERS PTC 100-2603................................ GRT & Rayburn PTC 100-2604...................... Rocket & MasterSbilt LON 52-78410 ..................................... GM Adapter LON 52-78424 ........................... Magnetic Adapter LON 52-78242 ...............................Repl Caster Vial LON 52-78240 ............................ Repl Camber Vial

rear brake pressures - at the caliper • Kit includes two pressure gauges (not liquid fi lled) and case e

• Set Front-to-Rear bias for best performance • Install in bleeder valve to check (1/4"-28 thread) LON 52-44145 ...................Brake Pressure Gauge

105

WARNING: Some products can expose you to chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov