2020-2021 Purchasing Guide Volume 5

ELECTRICAL WORK BOXES

SQUARE CEILING FIXTURE MUD- RING 4" • Used to hang light fixtu e from 4" square box • Not designed for ceiling fan support • Angled mounting slots allow for correction of box misalignment • 50 lbs. max. recommended support load • This is a UL-, CSA-listed product

REMODEL FAN BRACE • Max load: fans 70 lbs., fixtu es 150 lbs. • 1/2" deep • Two knockouts for conduit or Romex • This is a UL-listed product

ITEM NO. 95-7478 95-7479

MODEL NO.

CU. IN.

RAISED 1/2 IN. 5/8 IN.

PKG. QTY.

ITEM NO. 12-5932

CU. IN.

PKG. QTY.

767 756

3 4

1 1

13.2

1

CEILING FAN PAN • Includes nonmetallic sheathed cable connector, mounting hardware, and instructions • High strength, hardened screws • Knockouts in bottom of pan allow for easy entry and exiting with cables • 4" round • This is a UL-listed product

GANG BOX MUD-RING MULTI- DEVICE • Raised gang box device covers • Rings are used in finish wall applications to mount switches or receptacles • Standard raised 3/4" for commercial wall applications • Additional keyholes allow device covers to also fit next smaller box (example: a 3-gang cover will fit a 2 or 3-gang box) • This is a UL-listed product

ITEM NO. 03-3002

MODEL NO.

PKG. QTY.

295-1

1

ITEM NO. 95-7491

MODEL NO.

CU. IN.

RAISED 3/4 IN.

PKG. QTY.

822

15.3

1

ROUND CEILING FAN SUPPORT BOX • Ceiling fan rated round boxes can be used in the installation of heavy light fixtu es or ceiling fans • Includes nonmetallic sheathed cable connector, mounting hardware, and instructions • High strength with hardened screws • Knockouts in bottom of box allows for easy entry and exiting with cables • 4" round with 1/2" bottom knockouts • 1-1/2" deep • This is a UL-listed product

4" FLAT OCTAGON COVER • Flat covers are used to close an outlet box or mount a device • Keyhole mounting feature allows for installation of cover without removing box screws • This is a UL-listed product

ITEM NO.

MODEL NO.

PKG. QTY.

ITEM NO. 16-0677

MODEL NO. 296-1KO

PKG. QTY.

BLANK COVER 95-7511

1

722

1

1/2" KNOCKOUT IN CENTER OF COVER 95-7512 724

1

3-1/2" ROUND COVER • Flat covers are used to close an outlet box or mount a device • Keyhole mounting feature allows for installation of cover without removing box screws • This is a UL-listed product

ITEM NO. 95-7520

MODEL NO.

PKG. QTY.

KWIK-BRACE™ ROUND CEILING FAN BOX WITH BRACE FOR NEW WORK • Kwik-Brace™ is used to hang fans and light fixtu es between joints or structural members safely and securely • For new work installations • Brace is adjustable from 16" to 24" joist spacing • Includes nonmetallic sheathed cable connector, mounting hardware, and instructions • High strength with hardened screws • Knockouts in bottom of box allows for easy entry and exiting with cables • 1-1/2" deep • Recommended ceiling support load (dynamic) 70 pounds/ fixtu e load (static) 210/90 pounds • This is a UL-listed product

703

1

SWITCH BOX ADD-A-DEPTH RING • Add-a-Depth ring used to correct for a 3" x 2" switch box or 4" square box (2 needed) set too deep in a wall • Adjustment range 1/4" to 1" • Two, 1-1/8" long screws included • This is a UL-listed product

ITEM NO. 95-7517

MODEL NO.

PKG. QTY.

ITEM NO. 16-0679

MODEL NO.

CU. IN.

PKG. QTY.

976

1

926-1

15.5

1

SOME ITEMS ON THIS PAGE CAN EXPOSE YOU TO CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND/OR BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. VISIT HOMEDEPOTPRO.COM TO REVIEW FULL WARNING AND FOR MORE INFORMATION GO TO WWW.P65WARNINGS.CA.GOV.

HomeDepotPro.com/Multifamily

1-800-345-3000 , Se Habla Español: 1-800-355-3335

926