2020-2021 Purchasing Guide Volume 5
BACKFLOW PREVENTERS
BRONZE BACKFLOW PREVENTER • WARNING: DO NOT USE THIS PRODUCT WITH WATER SYSTEMS THAT CONVEY OR DISPENSE WATER FOR HUMAN CONSUMPTION • Intermediate atmospheric vent • For laboratory equipment, processing tanks, sterilizers and dairy equipment • Can be used on hot or cold lines under continuous pressure • Brass body, stainless steel parts, integral strainer • Can be installed horizontally or vertically • Max. pressure 175 psi • Max. emergency backflow temperatu e 250°F • This is a CSA-listed product
LEAD-FREE IRON BODY WATER PRESSURE REDUCING VALVE • Special unitized construction: seat, disc and stem assembly and strainer screen all as one unit for complete replacement • Stainless steel seat & integral strainer • High temperature resisting diaphragm for hot or cold water, maximum temperature 180°F • Suitable for supply pressure to 250 lbs. • Adjusts from 25 to 75 lbs. • Factory preset at 50 lbs. • Lead-free compliant
ITEM NO. 28-9995 28-9996
MODEL NO.
SIZE 1/2" 3/4"
PKG. QTY.
1/2 LFN250B 3/4 LFN250B
1 1
ITEM NO. 82-8092
MODEL NO. 1/2 9DS-M3
SIZE
PKG. QTY.
1/2" SWT UNION
1
LEAD-FREE SINGLE-UNION PRESSURE-REDUCING VALVE • Designed to reduce high inlet pressure to a lower outlet pressure • Reacts in a smooth and responsive manner to changes in system flow demand • Provides protection from inlet pressure change • Lead-free compliant • This is a CSA-listed product
LEAD-FREE BRONZE ANTI- SIPHON PRESSURE TYPE VACUUM BREAKER • 800 series valves are designed to prevent back siphonage of contaminated water back into a potable water supply • Working temp 33°F to 140°F • Max pressure 150 psi • Approvals: ASSE #1020, FCCCHR of USC, C.S.A., IAPMO listed • Model LF800M4QT • Lead-free compliant • This is a UPC-, CSA-listed product
ITEM NO. 29-0580 29-0581
MODEL NO.
SIZE 3/4"
PKG. QTY.
34-70XL 1-70XL
1 1
1"
LEAD-FREE WATER PRESSURE REDUCING VALVE WITH INTEGRAL BY-PASS CHECK VALVE AND STRAINER • Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure • Integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris • The direct acting integral by-pass design prevents build-up of excessive system pressure caused by thermal expansion • The balance piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes • ASSE® listed 1003 IAPMO® listed CSA® Certified NSF® listed - Standard 61 Annex G • Maximum working water pressure 400 psi • Reduced pressure range 15-75 psi • Factory Preset 50 psi • Lead-free compliant
ITEM NO. 28-9993 28-9994
MODEL NO.
SIZE
PKG. QTY.
3/4 LF800M4-QT 1 LF800M4-QT
3/4" NPT
1 1
1" NPT
LEAD-FREE PRESSURE VACUUM BREAKER ASSEMBLY • Designed for installation on irrigation water lines to protect against backsiphonage of contaminated water into the potable water supply • Assembly shall provide protection where a potential health hazard exists • ASSE® Listed 1020 IAPMO® Listed CSA® Certified • App oved by the Foundation for cross-connection control and Hydraulic Research at the University of Southern California • Maximum working water pressure 150 psi • Maximum working water temperature 110°F • Hydrostatic test pressure 300 psi • Lead-free compliant • This is a CSA- listed product
ITEM NO.
MODEL NO.
SIZE
PKG. QTY.
DOUBLE UNION CONNECTION (FNPT) 10-30405 34-NR3XLDU
3/4"
1
CPVC TAILPIECE CONNECTION 35-70723
34-NR3XLDUCPVC
3/4"
1
MALE BARBED CONNECTION TAILPIECE 35-70724 34-NR3XLDUPEX
ITEM NO. 27-1997
MODEL NO.
SIZE
PKG. QTY.
3/4"
1
1-720A
1"
1
SOME ITEMS ON THIS PAGE CAN EXPOSE YOU TO CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND/OR BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. VISIT HOMEDEPOTPRO.COM TO REVIEW FULL WARNING AND FOR MORE INFORMATION GO TO WWW.P65WARNINGS.CA.GOV.
431 For pricing and additional product details, log on to our mobile app or website.
Made with FlippingBook - Online magazine maker