D&L Parts Co. Vol. 3
Coil Kits, Transformers & Sequencers
Unit#3078076
SEQUENCERS
DUCT HEATER COIL KITS
DH Series
For use in controlling operation of heating elements and/or blower motors in electric, gas or oil heat systems. Features 24V input control
and 24V heater. CSA approved. No. Q113. Features 240V heater.
Order No. Q101 Q102 Q103 Q104 Q105 Q106 Q107 Q108 Q109 Q110
Off Sec.
On Sec.
40 to 110
1 to 20 30 to 90 1 to 20 30 to 90 1 to 110 1 to 110 1 to 20 1 to 25 20 to 50 10 to 30
1 to 30
40 to 110 1 to 30 1 to 110 1 to 110 40 to 110 65 to 115 40 to 110 30 to 60
For use with duct heaters, electric furnaces, air curtains and strip heat- ers. Features nichrome heavy-gauge construction and welded terminal bolts. 5000W at 240V, 3750W at 208V. Includes (2) male and (2) female bushings, terminal screws, nuts, washers and 306°F thermal cutoff.
Order No.
Close Wound Lgth. In.
DH500
28 12
90 to 160 (M1 to M2), 30 to 60 (M3 to M4) 90 to 150 (M1 to M2), 30 to 60 (M3 to M4), 30 to 60 (M5 to M6)
10 to 40 (M1 to M2), 10 to 30 (M3 to M4)
DH500FC
Q111
Unit#3078048
FAN CENTER TRANSFORMERS
10 to 30 (M1 to M6)
Q112
Q113 Q114 Q115 Q116
15 to 65 15 to 25 1 to 45 1 to 45
30 to 10 15 to 45 1 to 60 1 to 60
For use in low voltage control of line voltage fan motors and auxiliary circuits in HVAC systems. Features DPDT plug-in relay, 40 VA trans- former and color-coded wiring. 3/4 HP.
Order
Volts AC
No.
Primary
Secondary
CoilKits,Transformers&Sequencers FX4031 FC4011
120
24 24
120/208/240
Unit#3078162
TRANSFORMERS
Our pledge is dedication to outstanding customer service.
Features 50/60 Hz Class 2 design and enclosed frame (plate, foot or knockout mount). Includes 4” x 4” mounting plate, wire nuts, 1/2” con- duit and 8” leads. Measures 2-1/16” H x 3-1/4” W x 2-3/4” D.
Order
Volts AC
No.
Primary
Secondary
T45
120/208/240
2.5, 8, 12, 16 & 24
This information is provided “as is” without warranty of any kind by any person, including without limitation, the owner and the publisher.
338
Made with FlippingBook