D&L Parts Co. Vol. 3
Mounting Rings, Adapter Kits & Blowers
Unit#2786043
Unit#2786042
MOUNTING GROMMETS
NEOPRENE GASKETS
For use with 3.3” dia. motors. Includes gasket and (4) grommets.
Order No.
Bolt Circle Dia. In.
GASKET0167
2.84
Unit#2786022
RAIN SHIELDS
Includes steel sleeve.
Order No.
Desc.
GROM6008 GROM6000
For 3/4” slot For 1/2” slot
Unit#2786024
RUBBER MOUNTING RINGS
Order No.
Motor Shaft Dia. In.
KIT170
1/2 5/8
RAIN6000
KIT188
KIT184
Unit#2786048
TIE RODS
Staked
KIT187
For use with direct-drive blower motors and clamp-type supports. No. KIT187. For use with H33 in Nutone and Broan applications.
8” length. No. KIT220. Includes one staked nut and one regular nut.
Order No.
Order No.
Motor Dia. In.
Desc.
Type
For 5.6”, 5.0” & 4.4” Dia. Motors
KIT220 KIT221
8-32 NC 10-32 NC
5.6 4.4
KIT184 KIT183 KIT186 KIT180 KIT187
Henrite 2.50” OD Henrite 2.25” OD All Rubber 2.50” OD
Unit#2786055
WATER SLINGERS Order No.
For 3.3” Dia. Motors
Henrite 1.80” OD
Dim. In. ID x OD
Rubber mounting rings
Mounting Rings, Adapter Kits & Blowers Unit#2786014 MOUNTING ADAPTER KITS & PARTS
SLINGR6002
1/2 x 2
Unit#1000001
H33
KIT414
DRAFT INDUCER BLOWERS
Single speed, shaded pole design with open enclosure and sleeve bearings. Clockwise rotation. 3.3” diameter. 208-240V. 60 Hz. 3000 RPM.
MNT1518
KIT208
Order No.
Desc.
Order No. 82862
Mounting kit for 3.3” dia. Nu-tone units; includes (4) nuts and (2) hex-hub brackets
H33
HP
Amps
1/35
0.50 to 0.59
KIT414 Adjustable casebolt mounting kit MNT1518 Coleman “Lord” mount; 1/4” x 8-32 stud; 1/4” x 8-32 hole; 1/2” x 1/2” bushing KIT208 3/8” x 8-32 x 3/8” studs; 1/2” x 1/2” bushing
This information is provided “as is” without warranty of any kind by any person, including without limitation, the owner and the publisher.
296
Made with FlippingBook